Yard Machines Lawn Mower Parts

This 21-inch extreme blade is an OEM replacement part for select lawn mowers. Routine blade maintenance is an important part of owning a lawnmower. With regular sharpening and care, this durable blade made of high-quality metal should last for a long time. However, the blade can still become dull with regular use or damaged by hitting concrete or other objects. If the cutting as it should, replace it immediately for safety and effective operation. This OEM blade offers a greater cutting surface and extreme cutting power for compatible machines. Installing the blade is simple and only requires a wrench. Disconnect the spark plug for safety before accessing the mower deck. Always wear gloves when working on blades or engine components. This extreme blade replacement is designed for use with various MTD lawnmowers, as well as models from Troy-Bilt, Yard Machines, Yard-Man, and Craftsman. This blade is sold individually.

This control cable is a genuine MTD part, sold individually. This control cable can be used as a replacement part in a lawn mower. The purpose of a control cable, otherwise known as a throttle cable, in a lawn mower is to allow the operator to control the speed of the mower.The control cable in a lawn mower might be subject to replacement in the event that it is damaged. This damage can manifest in the form of puncturing, fraying, tearing, ripping, eroding, or warping. If the control cable is no longer functioning, it should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement. This component is a genuine OEM replacement part sourced directly from the manufacturer. This control cable is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Craftsman, and Yard Machines.

The drive clutch cable is a clutch or engagement cable that tightens the drive belt or lifts the spinning friction disc contained within the drive housing. It will cause contact between the driveshaft and turn the wheels. If the wheels refuse to turn, it may be due to a cable that is damaged, loose, or snapped. If tightening the tension fails to yield results, this OEM replacement cable is needed. Replacing a drive clutch cable is fairly easy. Remove the original and use pliers and a socket set to install and tighten the new one. "This is a drive clutch cable designed for use in snowblowers produced by MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard-Man, and others. It ships individually and is made of rubber, wire, and metal.

This throttle cable is a genuine MTD part, sold individually. This throttle cable can be used as a replacement part in a lawn mower. The purpose of a throttle cable in a lawn mower is to allow the operator to regulate and set the speed and pace of the appliance while in use through the engagement and disengagement of the throttle cable which propels and stops the appliance, respectively.If the throttle cable is frayed, torn, ripped, scraped, warped, eroded, or otherwise damaged, the throttle cable should be removed and replaced by this genuine OEM replacement part in order to continue the safe and proper usage of the lawn mower. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This throttle cable is compatible with the following outdoor appliance brands: MTD.

This replacement part is a cable pulley intended for use in lawn equipment. This is a genuine replacement part made by Husqvarna. Cable pulleys control the speed of the lawn mower. The user is able to use the cable pulley to control the speed of the machine throughout use.A new cable drive might be needed if the current one is snapped, broken, or damaged. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. For more detailed instructions on how to replace this specific part, please reference the user guide or manual for the appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn equipment made by MTD.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This control cable is a genuine MTD part, sold individually. This control cable can be used as a replacement part in a lawn mower. The control cable allows the user to control when the mower starts and stops.The control cable might need to be replaced at some point within the typical lifespan of a lawn mower; this can occur if the control cable is sufficiently frayed, torn, ripped, scraped, or otherwise damaged to the point that it does not work in conjunction with engagement from the operator. If this malfunctioning or state of disrepair occurs, the control cable should be removed and replaced by this genuine OEM replacement part before using the lawn mower again.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This control cable is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Craftsman, Yard Machines, and Cub Cadet.

This is a pawl that can serve as a replacement for some mower models, as well as chippers and shredders. The pawl attaches to the ratchet pawl plate. The pawl is essential for starting the engine. When the starter turns, the pawl is forced outward and locks onto the flywheel, allowing the engine to start. When the starter rope is let go, the springs pull back the ratchet pawls. If there is damage to the pawl, the engine will not start.The piece is made from durable metal, and it is built to last. However, it can start to wear down over time. Additionally, there is the potential that it could corrode. If there are issues with the pawl, replace them as soon as possible to ensure their machine continues to operate properly.This pawl can work with select models from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. The piece is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

This replacement part is a ratchet wheel, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Ratchet wheels are commonly found in many types of machinery. The ridges around the wheel allow for continuous motion in one direction, while completely prevention any kind of motion in the other direction. This is an important part of many type of lawn mowers. A new ratchet wheel might be needed if the current one is visibly worn down or damaged in any way. If the user notices unfamiliar sounds coming from inside the machine, then the ratchet wheel might not be turning in the complete right direction. Be sure to wear work gloves while replacing this part as the wheel itself might be sharp. This replacement part is sold individually. Note that it is a genuine OEM part sourced directly from the manufacturer.

This is a small engine spark plug positioned in the engine cylinder head. It supplies the spark that will ignite the air-fuel mixture to enable an engine to produce power. This particular spark plug is designed with superior corrosion resistance and dependable performance. Small but mighty, this component allows for increased conductivity and heat control. If the spark plug is damaged or in poor condition, many problems may arise in equipment, including sudden stop while running, overheating, and excessive gas consumption. Replace the spark plug by disconnecting the spark plug wire first, then use a socket driver or wrench to remove the spark plug. Install the new spark plug by turning it by hand initially to avoid cross-threading. If it doesn't twist anymore, use a deep socket wrench or socket driver to tighten the plug until snug. The spark plug can also be used to tune up outdoor power equipment or improve a small engine. This part is recommended to be replaced once per season. This part works with lawn mowers, snowblowers, tillers, leaf blowers, log splitters, wood chippers, and others with small engines. It is compatible with brands such as Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut. This is a genuine OEM part directly from the manufacturer and is sold individually.

The flywheel key keeps the engine flywheel and the crankshaft connected. In the event that the engine is forced to a sudden stop, the flywheel key could be sheared off, making it impossible for the engine to start back up again. Replacing the flywheel key is a part of routine maintenance for many modern engines, so it should be inspected and replaced as needed. This sturdy metal flywheel key is easy to install, but remember to choose the right torque setting when doing the replacement. Always disengage the spark plug and wear gloves when replacing engine parts. This genuine flywheel key is designed to be used in a number of lawn and garden equipment products from MTD, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Husky, and Bolens. It can be used as a replacement for many models of snowblowers, lawnmowers, and log splitters. Sold individually.