Yard Machines String Trimmer Cap, Lid & Cover

This genuine air cleaner cover assembly protects the air filter cleaner on select string trimmers from the elements and exposure to potential debris and damage. This allows the filter to work properly and avoid serious clogs or damage in the meantime. The cover consists of a durable plastic housing, but it can become cracked or damaged over time or due to an incident. In the event that the air cover is broken, it should be replaced right away to prevent further damage or cause issues with the air filter. This genuine OEM air cleaner cover is manufactured by MTD to exact standards. It offers compatibility with several string trimmers from MTD, as well as those from Yard Man, Bolens, Yard Machines, Troy-Bilt, and Cub Cadet. This kit includes the plastic air filter cover, the plastic insulator, and two metal bolts that attach the cover to the air filter base assembly on the engine. It is recommended to replace the air cleaner gasket at the same time, which will require a separate purchase. Always allow the engine to cool and wear gloves when doing any engine work.

This fuel cap assembly fits on the lawn tractor fuel tank to keep the fuel inside and debris outside. The part is red and has a gas pump embossed on it for added identification. The top of the cap also features vent slots to allow hot air to escape and prevent heat expansion. It features a gasket under the cap to keep gas from sloshing out during operation. The fuel cap assembly is made of heavy-duty plastic that can fade and crack due to the elements. Removal and replacement are as simple as taking the old cap off and putting the new cap on. Hand-tighten to prevent gas from leaking. Never over-fill the fuel tank. Leave room for the oil additive if it is not mixed before fueling. This fuel cap assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual unit. This fuel cap is designed for use in lawnmowers and lawn tractors manufactured by MTD, Ryobi, Troy-Bilt, Bolens, Yard-Man Yard Machines, Cub Cadet, and Murray.

This replacement fuel cap is used with many types of gas-powered lawn and garden tools. The purpose of the fuel cap is to help keep dirt and debris out of the fuel tank. It also helps to reduce extra air from getting into the tank.Debris or air in the fuel tank can make it difficult to start a gas-powered machine. Dirt can cause damage to the engine, as well. The replacement fuel cap is a simple way to ensure these types of issues do not occur. Most fuel caps can last for many years without needing a replacement. However, over time, they could become damaged or worn out from too much use. The old cap can be removed and the new cap can be screwed onto the fuel tank to replace it. No tools are needed.The fuel cap can be used with trimmers and blowers from a range of manufacturers including Yard Machine, Cub Cadet, MTD, Craftsman, Murray, Remington, and Troy-Bilt. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

This is a fuel cap. It keeps fuel from leaking or spilling, and slows fuel evaporation when a machine is sitting for long periods. The fuel lid can be cracked or otherwise damaged, or it can become lost when removed for refilling. For the safety of the operator, a missing or broken fuel cap should be replaced immediately.Replacing a fuel cap is simple. If there is an existing cap, remove it first by turning it counterclockwise. Install the new fuel cap by matching up the unit's threads and twisting it clockwise until secure. Wear gloves when working with fuel caps.This fuel cap is a genuine OEM part. It is made of high-quality, durable materials. The cap is sold as an individual piece. The fuel cap can be used with MTD, Cub Cadet, and Troy-Bilt machines. It is compatible with blowers, cultivators, edgers, trimmers, and other lawn and garden equipment.

Blade guards are essential for protection from flying debris that may be kicked up or disturbed by the edger blade. They prevent debris such as small stones from being kicked up while the equipment is in use and are an important safety feature. Operating an edger without a blade guard can be dangerous. This edger blade guard can be used to easily replace worn out or broken blade guards.This edger blade guard is a genuine OEM part that has been sourced directly from the manufacturer. This replacement edger blade guard can be used on multiple different edger models including Troy-Bilt, Craftsman, and Husky. Please note that this part is sold individually.

This is a quality rear engine cover that is used on several types of string trimmers. The component is tightened onto the back of the trimer to offer protection and shielding to the engine. It is made of a durable material and comes with both the cover and four screws to attach it to a string trimmer. Over time, the rear engine cover can become damaged, broken, or lost and should be replaced to ensure the engine is protected.Check the rear engine cover for cracks and other damage before installing a new replacement part. First, remove the screws from the rear engine cover so it can be taken off of the string trimmer. An O-ring may be needed to create the proper clearance when installing the new rear engine cover. Make sure to properly tighten the screws on the cover before use.This rear engine cover is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The engine cover is designed to be compatible with string trimmers manufactured by Bolens, MTD, Yard Machines, Murray, and Craftsman.

This genuine MTD belt cover can be used as a replacement part for lawn and garden appliances that are operated by small engines, such as lawn tractors, snowblowers, chipper shredders, leaf blowers, edgers, and lawnmowers. The purpose of a belt cover is to protect the gears, the belt, and the engine and its components from accumulating dirt and debris internally, which can cause individual components to malfunction and fall into disrepair.A belt cover will have to be replaced in the event that it can no longer protect the gears, the belt, and the engine. A belt cover can suffer from damage as a result of overuse or direct collision; this form of damage can limit the ability of the belt cover to perform its precautionary function. Remember that gloves must always be worn when handling, repairing, and operating outdoor equipment. This OEM belt cover part is compatible with the following brands: MTD, Craftsman, Cub Cadet, and Yard Machines. This part is sold individually.

This is a genuine MTD air cleaner cover that is designed for use with select models of outdoor lawn and garden engines. The air cleaner cover is designed to fit over the air cleaner and keep debris from getting into the filter and the engine. Over time and even with the best care, air filters can become clogged, dirty, and even damaged, and they should be checked during regular routine maintenance. For those who want to replace a damaged cover or housing at the same time as the cleaner filter, this part is going to do the job. A screwdriver will be needed to install the part. Be sure to allow the unit to cool and wear gloves when performing repairs.This is an OEM replacement from MTD that is manufactured to specific standards. It can be used with select trimmers from Troy-Bilt, Cub Cadet, Yard Machines, and MTD. It includes the filter cover and the two bolts that hold it in place. The air cleaner element is also included in this assembly, which is sold as an individual unit.