Yard Machines String Trimmer Parts

A cotter pin, also known as a hitch pin, is used to secure pins and shafts in place. Meant for snowblowers, riding lawnmowers, and lawn tractors, this bow-tie shaped cotter pin has a double-end design making it easy to pull or push through either side of a pre-drilled hole. This pin snaps into a locked position without tension, keeping it secure during operation. Designed for lawn and garden maintenance equipment, this part ensures secure fastening. If the power equipment is used frequently, cotter pins may have to be replaced regularly so it would be practical to keep extra bow tie cotter pins on hand. It is highly recommended that work gloves be worn during the installation of this part. This part is compatible with Craftsman, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Bolens, Yard-Man, and MasterCut brands of lawn mower, snowblower, and log splitters. This is a genuine OEM replacement part that is sold individually.

A flange nut's unique wide flange design distributes the nut's pressure over the part it is securing. In return, it creates an even fastening surface, which reduces part damage and nut loosening. This one-piece all-metal fastener has a lock nut version that features a protruding circular flange. This drastically increases bearing surface, compatibility either for irregular or oversized holes, and surface tension reduction. Flange lock nuts are the preferred type of fastener for many lawnmower models because it can provide better fastening than regular screws, which are known to loosen under extreme vibration. However, it’s important to know that flange lock nuts are susceptible to wear and tear due to constant vibration exposure. It is essential to replace the broken flange lock nut immediately to prevent serious damage to the lawnmower. The MTD 712-04063 Flange Lock Nut OEM replacement can be used with Craftsman, White Outdoor, Yard Machines, MTD, or Columbia lawnmowers. It is a genuine or OEM MTD replacement part that measures 5/16-18. It is threaded and requires the use of a wrench. This replacement flange lock nut is sold individually. An MTD bolt carriage may also be needed and is sold separately.

This is a fuel tank for MTD string trimmers. It’s constructed from white resin, which combines the tank and mounting flanges in a one-piece, molded design. The gas cap is glossy black plastic, and the tank and primer leads are both already installed. There are two mounting screws included in the kit, making installation more convenient. This is a 2-cycle fuel tank designed for engines that run on a mixture of oil and gas. Ordinary gasoline can cause damage to the fuel lines. Tanks should ideally last for several years but can get damaged, causing a leak. Gas tank leakage is a significant safety issue and must be fixed immediately. Tanks may also need to be replaced if they become extremely soiled. To replace the tank, you will simply need to disconnect the old tank’s fuel lines and remove the two mounting screws. In addition to MTD trimmers, this tank is also used on some Troy-Bilt and Cub Cadet models. This is an OEM part sourced directly from the manufacturer, and it is sold individually.

This fuel tank assembly stores fuel. It is made from a thick plastic material. The assembly includes the fuel tank, fuel cap, and fuel lines. Although it is generally durable, exposure to fuel chemicals and the environment can eventually cause fuel tank leaks. When this happens, the fuel leak may damage other components. To install a new tank assembly, make sure to drain the old tank first. Detach the fuel lines and then use a screwdriver to remove its mounting screws. This replacement will take less than 10 minutes to complete. MTD makes this brand-new fuel tank assembly. This replacement includes the tank itself, the fuel lines, fuel cap, and mounting screws. All of which are sourced directly from MTD. It is compatible with string trimmer models from Bolens, Yard-Man, Murray, Craftsman, Yard Machines, MTD, Cub Cadet, and Troy-Bilt. This fuel tank assembly doesn't include the original MTD air filter.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

This ground drive belt works to drive the transmission, which turns the wheels of the lawn maintenance equipment. The ground drive belt might be attached in a way that transfers the engine’s power to the pulley in charge of spinning the blades instead. Ground drive belts are made from a flexible rubber that can become brittle, cracked, or broken over time. The replacement of the ground drive belt will require a wrench to complete. This ground drive belt is compatible with Bolens, Craftsman, Ryobi, MTD, Troy-Bilt, White Outdoor, Yard Machines, and Yard-Man brands. It can be placed in lawnmowers, tillers, chipper shredders, leaf blowers/vacuums, edgers, log splitters, snowblowers, trimmer, and other lawn and garden equipment. This ground drive belt is a genuine OEM part.

A carburetor is responsible for combining fuel and air into the right combustible mixture. When it is malfunctioning, there are several warning signs to look out for. These include poor fuel economy, rough idle, flooding, and engine misfire. Installing a brand-new carburetor can help. A carburetor replacement is easy and starts with turning off the lawnmower. Open its air filter cover and use a screwdriver to remove the air filter base. Once detached, disconnect the throttle cable and fuel line. Place the new carburetor and connect the fuel line and the throttle cable. Put back the air filter base. This is a brand-new and original MTD carburetor. It is compatible with tillers, leaf blowers, and string trimmers from MTD, Bolens, Craftsman, Troy-Bilt, Yard-Man, and Yard Machines. This carburetor is fully assembled and sold individually. Additional carburetor gaskets are sold separately.

A carburetor needs fuel to produce the required combustible mixture of air and gas. To get fuel, the carburetor draws the liquid directly from the fuel tank. Any excess fuel will be returned to the tank through the fuel return hose or fuel return line. In addition to providing the path, a fuel line is also responsible for preventing over-pressurization, as well as vapor lock. A fuel return line is constructed from a thick rubber material that is also fuel resistant. However, it may still become brittle and crack due to regular wear and tear. Usually, a broken fuel return hose results in symptoms such as engine misfires, loss of power, carburetor flooding, fuel leaks, and hard starting. A brand-new replacement is available here. This fuel line return is an original part from MTD. It measures 3.78 x 3.78 x 0.016 and is compatible with tillers, leaf blowers, and string trimmers made by Craftsman, Ryobi, Yard Machines, MTD, Bolens, and Yard-Man. Installation will require a screwdriver, cutters, and pliers. This fuel line return is sold individually.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

A carburetor gasket is a thin rubber material that provides a seal between two parts. Its primary purpose is to prevent fuel and air leaks. This gasket is installed between the air cleaner and the carburetor. Over time, it can crack and tear due to heat and fuel exposure. When this happens, the carburetor may produce the wrong combustible mixture for the engine. In return, the engine may experience rough idling and flooding. A carburetor gasket replacement is necessary. MTD makes this carburetor gasket replacement. It is manufactured to fit string trimmer, leaf blower and tiller made by MTD, Bolens, Troy-Bilt, and Craftsman. This brand-new carburetor gasket is sold individually. A fully assembled carburetor and O-ring are sold separately.

This is a replacement spark plug that is designed specifically to be used with select string trimmers. the spark plug is connected to the ignition module and is responsible for creating the spark that starts the internal combustion engine. Over time, the electrode on the spark plug will wear down. Other issues can also arise that cause the spark plug to foul or stop working. Spark plugs are part of routine maintenance on any engine, but most owners keep a spare or two around just in case of emergencies. In the event that the spark plug is bad, the engine will not start. This genuine OEM spark plug is manufactured by MTD and designed for use in select trimmers. It is compatible with over 50 models of string trimmers from MTD, Bolens, Murray, Troy-Bilt, Yard Man, and Cut Cadet. Owners will need to consult their product diagram or manual to find the exact gap for the spark plug when replacing them. Many models claim to come pre-gapped, but they can settle during shipping and should always be re-gapped prior to installation. This is sold as an individual unit. Be sure to wear gloves for hand protection when replacing spark plugs and performing other maintenance.

The Hex Head Self-Tapping Screw is an OEM part for MTD outdoor power equipment. This screw is designed to securely fasten components of your equipment, providing reliable and durable connections. The thread size is 5/16 inches for major diameter, with 18 threads. The screw is 3/4 inches long and has a hexagonal or six-sided head. 

Over time, the Hex Head Self-Tapping Screw can become damaged due to corrosion, stripping of the threads, or wear from frequent tightening and loosening. This can compromise the integrity of the connections and potentially lead to equipment malfunction.

Symptoms of a bad Hex Head Self-Tapping Screw include:

• Loose or wobbly components
• Difficulty tightening or loosening the screw
• Visible damage or corrosion on the screw

This OEM replacement part is designed for use with various models of MTD outdoor power equipment.

The blade adjuster rod is used to set the position for the blade for bevel cutting. These are useful for those who want to have more control over the way their mower or edger works and the results they can achieve. The adjustment rod is made from metal and is generally long-lasting. However, over time, it can suffer from wear and tear and may even break. To replace the rod, a screwdriver, pliers, a wrench set, and a socket set may be needed. Repairing the adjustment rod should be relatively easy and only take about half an hour to complete. The rod-adjust is a genuine OEM part that can work with a range of machines from Craftsman, Yard Machines, MTD, Bolens, and Yard-Man. The rod-adjust is most commonly used in lawnmowers and edgers.

These O rings are replacement parts intended for use in a number of gasoline-powered lawn trimmers. The O rings serve as gaskets and are placed at the entry and exit points in the carburetors where gasoline and air are mixed and the expansion powers the trimmer. Though constructed of durable material, periodically the flow of the air/fuel mix or the rush of expanding air will cause damage to occur to the O rings so they become less resilient and the carburetor functions less efficiently. In these cases, users often decide to replace not just the element of the carburetor but the O rings as well. Users may notice problems with the carburetor when they cannot get an adequate adjustment, allowing the trimmer to function smoothly. They may also have trouble getting the trimmers to start at all or run without smoking. To replace the O rings, remove the air filter cover and carburetor. Once the carburetor has been cleaned, and the gasket and filter replaced, add a fresh mix of 40:1 fuel. The trimmer should start immediately. These OEM certified O rings are compatible with Bolens, Troy-Bilt, Yard Machines, and Craftsmen trimmers.

A bump head knob is a part of a string trimmer. When the trimmer is tapped against the ground or any hard surface, it will let out more line. This component, which is primarily made from rubber, is also responsible for securing the spool to the trimmer head. Over time, a bump knob can break. If it is damaged, the trimmer won't release more lines. It is easy to install a brand-new bump head knob replacement. First, get a screwdriver and unscrew the old bump knob. Grab the replacement and screw it to the trimmer head. Tighten it for a secure fit. This replacement only comes with a bump head knob. It doesn't have other string trimmer replacement parts. For an efficient, compatible part replacement, choose this MTD 791-153066B Bump Head Knob. You can use it with string trimmer models made by MTD, Bolens, Yard-Mad, Yard Machines, Craftsman, Troy-Bilt, and Ryobi. It is a genuine OEM part that is sold individually.

Installing a brand-new air filter keeps the engine in top running condition. When the machine is in operation, the vacuumed air goes through the air filter. Any dirt or dust is left in the filter media. Over time, the filter will become dirty and can no longer provide the same filtering efficiency as before. If left ignored, the tiny particles could clog the engine and the carburetor. You may experience misfires and no engine start-up. An air filter replacement is cheap and easy to do. Simply remove the air cleaner cover and take out the dirty filter. Insert the new filter into the housing. This replacement will take less than 5 minutes. A screwdriver will be needed. The MTD 951-10298 Air Cleaner Kit is a genuine air filter from MTD. Each kit comes with one paper filter and one foam filter. The foam filter can be cleaned with water and detergent. The paper filter, however, needs replacement at least once a year. This air filter kit is compatible with Cub Cadet, PowerMore, and Troy-Bilt. It can also work with other garden equipment like wheel string trimmers, chipper-shredder vacuums, and log splitters.