Yard Machines Tractor

Intake valve seal prevents air and fuel from escaping during engine operation. Replace if you notice oil consumption or reduced performance. Verify fit with your engine model number before ordering.

Replacement muffler stud assembly for lawn tractors and walk-behind mowers. Secures exhaust system components. Replace if damaged, stripped, or missing.

Engine bearing reduces friction between rotating and stationary engine parts. Replace if damaged or worn to prevent overheating. Verify fit with your model.

This is a clutch cover for a lawn tractor. The clutch cover attaches to the flywheel and either connects or disconnects the power through the clutch disc. A well-balanced clutch cover ensures proper rotation and heat radiation. The disc is pressed against the flywheel by the clutch cover to allow for rotation. This is a genuine OEM part and is sold individually. Generally, a clutch assembly should be replaced when there are symptoms of clutch wear. Clutch slippage can manifest by shuddering or shaking, while chirping or grinding noises also indicate there are issues. This indicates that the pressure plate is worn. As a result, all the clutch parts should be replaced together, including the clutch cover. This will ensure proper power to the engine. To replace the clutch assembly, be sure to check the owner's manual, as not all are assembled the same. This part is compatible with several brands, including Cub Cadet, Husky, Troy-Bilt, Yard Machines, and Yard Man.

Engine won't start or runs rough? This choke linkage rod connects the carburetor choke to the control lever. Fits lawn mower and tractor engines.

This part is a throttle linkage that is used on lawn tractors. The throttle is a means of controlling the engine by controlling the amount of fuel and air that enters the engine.A new throttle linkage may be needed if the pedal is hard to press, if the pedal does not release as it is supposed to, if the engine stalls, or if there is a delay in the response when the pedal is pressed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This throttle linkage is a genuine MTD part. It is sold individually. This particular throttle linkage is compatible with lawn tractors that are manufactured by MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt.

Engine running louder than normal? This muffler assembly reduces exhaust noise on lawn tractors. Metal construction for long-lasting performance.

Replacement muffler mounting stud for lawn mowers and tractors. Secures exhaust muffler to engine block. Needed when original stud is stripped or broken.

This replacement part is a gear. This is a genuine replacement part made by MTD. This part is small but very important to many machines. Gears have ridges that are connected to other parts and are able to rotate or turn in specific ways so that the engine operates smoothly. A new gear might be needed if the current one is stripped down due to friction over time. Due to the nature of the gear, it is not uncommon that this part should need to be replaced eventually. If the user hears noises coming from inside the machine, the gears may be out of place or damaged. Work gloves are recommended during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Starter brush assembly for lawn tractors and walk-behind mowers. Replace if engine won't start or turns over slowly. Verify fit with your model number.

Replace a cracked or damaged breather valve base causing oil leaks or pressure issues. Direct-fit part for lawn mowers and outdoor power equipment.

This muffler assembly is a genuine MTD part, sold individually. This muffler assembly can be used as a replacement part or a lawn tractor. The muffler assembly comes with the muffler and all of its fastening components which will be necessary for a new instillation or a total replacement of a muffler or a lawn tractor. The purpose of a muffler is to silence the appliance while it is in operation. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This muffler assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard Machines.

Complete carburetor rebuild kit with gaskets and seals for small engines. Replace when engine runs rough, won't start, or idles poorly. Verify fit.

This is a variable speed pulley, designed as a genuine replacement part for use in select lawn tractors and riding mowers. The variable speed drive pulley is designed to control the drive belt, in combination with the throttle and choke, to help control the engine speed and provide the right level of movement during the mowing process. The pulley is subject to repetitive motion and constant stress, which can cause it to wear. It can become bent or damage from impact, as well. A damaged or broken pulley will cause the engine to malfunction or not work at all, rendering the tractor useless until it is replaced. Using a genuine OEM replacement like this model is essential. This specific drive pulley fits select models from Craftsman, Cub Cadet, Troy-Bilt, and Murray. It is sold as an individual unit. Be sure to disconnect the spark plug before working on the engine. Allow the engine to cool completely and wear gloves for safety. Several tools will be required for this job, including flathead and Phillips screwdrivers as well as a socket or wrench set.

This part is a right-hand brake assembly bracket that is used on lawn tractors. The brake assembly is the component that stops the blade from moving.A new right-hand brake assembly bracket may be needed if the existing bracket is cracked, broken, dented, bent, or damaged in any way. Use extreme caution when attempting to replace any components near the blade of a lawn tractor. Allow the lawn tractor to cool off completely prior to attempting any care or maintenance on any component. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This right-hand brake assembly bracket is a genuine MTD part. It is sold individually. This specific right-hand brake assembly bracket component is compatible with lawn tractors that are manufactured by Yard Machines, MTD, Craftsman, Columbia, Mastercut, Murray, Yard-Man, and Husky.

Deck lift handle assembly for lawn tractors. Installs on the mower body to control cutting deck height adjustment. Replace if handle is cracked or broken.