Yard Machines Tractor

This part is a replacement gas gauge. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current gas gauge is broken or in any way damaged, this part can be used as a replacement. It is intended for use with several lawn tractor models.The gas gauge both measures the amount of fuel residing in the tank and seals the fill spout of the fuel tank. This ensures that no dirt, debris, or contaminants can enter the tank and pollute the fuel supply. It also prevents fuel from spilling out. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this gas gauge, the appropriate owner's manual and equipment diagrams should be referred to. This gas gauge is suitable for use on a variety of lawn tractor models manufactured by MTD, Troy-Bilt, Yard Man, Bolens, Cub Cadet, Husky, and Yard Machines. It is a genuine OEM part and thus is made of high-quality, durable materials. This part is sold individually.

This part is a PTO handle and deck engage cable service kit that is used on lawn tractors. This includes the entire PTO handle and deck cable assembly, which is the component that engages the mowing deck.A new PTO handle and deck engage cable service kit will be needed if any component of this system is cracked, broken, or damaged in any way. This could be due to tears, holes, or general erosion of the parts over time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This PTO handle and deck engage cable service kit is a genuine MTD part. It is sold individually. This particular PTO handle and deck engage cable service kit is compatible with lawn tractors that are manufactured by MTD, Yard Machines, Husky, Murray, and Troy-Bilt.

This part is a replacement label. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a lost or unreadable label in a variety of lawn tractor models.Labels are essential for correct and safe use of the equipment and thus need to be kept in good condition. Labels should be replaced if illegible. When working on or near an enginee, it is important to ensure the equipment is powered down and completely cool before beginning repairs. For more accurate information on how and where to place this label, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this label is suitable for use on tillers manufactured by MTD, Craftsman, Troy-Bilt and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This chute bracket is an authentic OEM replacement part sourced directly from the manufacturer for use on lawn mowers and lawn tractors to hold the discharge chute in place on the machine. The discharge chute directs the grass trimmings and debris out from under the lawnmower so that there is no buildup underneath the machine. If the bracket holding the discharge chute becomes loose, it may fall off during use, and the chute would then fall off the machine. Over time, the mower's vibrations may cause the screws holding the bracket to loosen and then come out, causing the bracket to fall off. If the bracket is missing, it should be replaced to ensure the discharge chute stays attached.Routine inspection of screws and nuts on the mower can prevent the bracket from falling off the machine. When replacing the bracket, make sure to keep the screws used to attach it to the lawnmower and reuse them to install the one. Make sure the screws are secure but not overtightened.This chute bracket is a metal part that is individually sold. It does not include fastening hardware. This bracket is designed for use on lawn mowers and lawn tractors manufactured by Troy-Bilt, Yard Machines, Yard Man, and MTD.

This is a metal belt cover. Designed for lawn tractors and lawn mowers, this part connects to the deck and serves to shelter and house the mandrel pulley assembly and belt. Without this cover, the belt and assembly could become compromised from dirt and debris and the lawn mower would cease to function. The cover is made of metal and when exposed to natural elements it is susceptible to corrosion and chemical degradation over time. It is also possible for it to become damaged accidentally if struck by a heavy object.The belt cover is relatively easy to install. The only tools required will be a wrench set. First, unfasten the nuts and bolts securing the old one in place. Then remove the old one from the mower and fasten the new one in its place.This is a genuine replacement belt cover and it is sold separately. The cover is designed to work with Husky, MTD, Yard Man, and Yard Machines models.

This is an upper floating idler bracket that is used in several models of lawn tractors. This part is located on the deck and holds the idler pulley in the correct position. The upper floating idler bracket is also responsible for providing the right amount of tension to the blade belt so the lawn tractor operates correctly. In some cases, the idler bracket may break or become lost and it will need to be replaced.A socket wrench and screwdriver will be needed to replace the upper floating idler bracket from the lawn tractor. A pair of work gloves will also be useful. Make sure the tractor is on a level surface and turned off. Disconnect the spark plug wire before removing any covers or shrouds that are on top of the idler bracket. The original damaged idler bracket should be removed before installing the new part. Reassemble the rest of the tool before use.This upper floating idler bracket is sold on an individual basis. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is designed to be compatible with lawn tractors by MTD and Troy-Bilt.

This drag link is a genuine MTD part, sold individually. This drag link can be used as a replacement part in a lawnmower. The purpose of a drag link, also known as a steering arm, in a lawnmower is to affix the steering wheel and the shaft to the front tires of the appliance for ease in steering the lawnmower while in operation.The drag link in a lawnmower might need to be replaced at some point within the typical lifespan of the appliance; this can occur if the lawnmower is difficult to steer in a way that is directly attributable to the drag link, which could be due to damage to the component. Damage can take the form of puncturing, warping, denting, cracking, or eroding, and if the damage precludes the function of the drag link, the drag link should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This drag link is compatible with the following outdoor appliance brands: MTD, Cub Cadet, and Yard Machines.

This axle is a genuine MTD part. It is a front left-hand axle made for lawn tractors and riding mowers. It is located on the front left side of the tractor. Wear and tear to the axles is expected over time, especially on the front axles.This axle is a genuine OEM part sourced directly from the manufacturer. It is sold individually. Lawn tractors typically have more than one axle. If one of them is worn, check the others and buy appropriate replacements.This particular axle is compatible with many makes and models of lawn tractors, including several manufactured by Bolens, Brute, Columbia, Craftsman, Huskee, Husky, MasterCut, MTD Gold, Murray, White Outdoor, Yard Machines, and Yard-Man. Since it works with so many models, the easiest way to check is by using the parts compatibility checker. This manufacturer also replaced obsolete part number 938-04014 with this axle.

This blade is an authentic OEM replacement part sourced directly from the manufacturer for use on lawn mowers and lawn tractors to cut grass and weeds. The blade is located underneath the deck of the lawnmower and rotates while the mower is in operation. The blade is sharp on all sides, and when it comes in contact with the grass and weeds, it cuts them. The blade can be sharpened many times before it will need to be replaced with a new blade. Park the lawnmower on a flat surface and remove the spark plug for safety purposes. Wear gloves when working on the lawnmower. Raise the deck to its highest position. Remove the deck from the lawn mower and tilt it on its side to access the blade. Remove the nut holding the blade on the shaft. Take the blade off the shaft and put the new blade on. Tighten the nut. Reattach the deck to the lawnmower. Install the spark plug and test the mower. This blade is a metal part that is sold as an individual unit. It is designed for use in lawnmowers and lawn tractors manufactured by MTD and Yard Machines.

This piston ring set is a genuine MTD part, sold individually. This piston ring set can be used as a replacement part for a lawn mower. The purpose of the piston ring set is to serve as a replacement for one or more piston rings for a lawn mower; the purpose of a piston ring is to seal the cylinder so the fuel that is combusted by the small engine does not leak into the area of the cylinder or the piston.The piston ring set might have to be ordered as a replacement part if one or more piston rings suffer from damage. If a piston ring is scraped, punctured, eroded, or warped to the point that oil can leak out of the seal, the piston ring set should be ordered as a genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This piston ring set is compatible with the following outdoor appliance brands: MTD, Craftsman, and Cub Cadet.

This valve kit is a genuine MTD part, sold individually. This valve kit can be used as a replacement part for a snowblower. The valve kit comes with all of the components necessary to replace the valves of a snowblower. The valve kit comes with a metal needle, a spring clip, and a plastic seal. The valves on a snowblower provide a safe passageway for the fuel to reach the carburetor.Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This valve kit is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Craftsman, Cub Cadet, Yard Machines, Huskee, and Yard Man.

This piston pin snap ring is a genuine MTD part, sold individually. This piston pin snap ring can be used as a replacement part in a lawn mower or a snowblower. This part stabilizes the pistons within the equipment's engine.The piston pin snap ring might be subject to damage within the standard lifespan of a lawn mower or a snowblower. This could occur in the form of puncturing, tearing, ripping, denting, cracking, or eroding, and if the damage is severe enough to preclude the piston pin snap ring from keeping its fastened components in place, the piston pin snap ring should be removed and replaced by this genuine OEM replacement part.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This piston pin snap ring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This replacement part is an intake valve seal. It is a genuine replacement part made by MTD. This intake valve seal is able to close the valve in the machine or appliance so that air of fuel cannot escape during use. This part is essential to the overall operation of the machine. A new intake valve seal might be needed if the current one is allowing for air or fuel to escape during use. This can cause additional problems within the machine in general. Be sure the engine is completely powered off and cooled down before attempting to replace this part. Reference the appropriate user manual for more information. This is a genuine OEM replacement part. This intake valve seal is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.