Yard-Man Trimmer

Cylinder gasket seals the combustion chamber in gas leaf blowers and trimmers. Replace if you notice fuel leaks, loss of compression, or hard starting.

Fastening screw for lawn mowers, snow throwers, and trimmers. Secures components together. Replace if stripped, corroded, or missing during repairs.

Carburetor insulator gasket for gas line trimmers. Sits between carburetor and engine block. Replace if cracked, warped, or missing to prevent air leaks.

Throttle cable for gas line trimmers. Connects trigger to engine throttle. Replace if cable is frayed, kinked, broken, or won't return smoothly.

Fuel return line hose routes excess fuel from the carburetor back to the tank. Replace if cracked, brittle, leaking, or damaged to prevent fuel loss.

Carburetor assembly for small engine edgers, tillers, and trimmers. Mixes air and fuel for proper engine operation. Replace if cracked or leaking.

This clutch assembly engages and disengages the drive system on a tiller, allowing the tines to spin when the clutch lever is activated. It transfers power from the engine to the tine shaft. Replace this assembly if the tines won't engage, slip during operation, or if the clutch lever no longer controls tine rotation properly.

This is a small-diameter fuel return line that connects to the engine's fuel system, routing excess fuel back from the carburetor or fuel delivery components. It ensures proper fuel circulation and pressure regulation in the engine. Replace this line if it is cracked, dry-rotted, leaking fuel, or causing hard starting and fuel smell around the engine.

The fuel line assembly with filter is the complete line that carries fuel from the tank to the engine carburetor, with an inline filter attached to catch debris and contaminants before they reach engine components. Keeping the fuel clean protects the carburetor and ensures consistent fuel delivery. Replace this assembly if the engine is hard to start, runs roughly, stalls frequently, if you notice fuel leaks, or if the filter is visibly clogged or deteriorated.

Replacement fuel cap assembly for tillers and outdoor power equipment. Seals fuel tank, prevents debris entry, and features vent slots. Needed when original cap is cracked, broken, or gasket is worn.

Protective cover that secures over the air filter on gas line trimmers and leaf blowers. Replace if cracked, broken, or missing to keep debris out.