Yard-Man Trimmer

This particular air cleaner filter is made for gasoline-powered trimmers. If any piece of lawn equipment kicks up more dust and particulate than a lawn mower, it is a trimmer. Trimmer line, unlike a mower, does not maintain a constant angle. Because trimmers are also frequently used as edgers, they fill the air with dust and debris. While air cleaner filters are made of durable material, they eventually become clogged with yard waste to the point that they simply cannot be cleaned. Users know that this is happening when the trimmer will not run smoothly, or it cannot be started at all when no other problem is indicated. The filter is replaced by removing the back cover and discarding the old filter. Before putting it in place, work a few drops of two-cycle oil into the new filter. This will help the foam capture more airborne pollutants. Reverse the process to install the new filter. When the time comes to replace the air cleaner filter, it is imperative that the new filter be an OEM certified part that has been manufactured to the same specifications as the original.This part may be used on string trimmers, tillers, and leaf blowers by Craftsman, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Bolens, and Yard-Man.

This is a screw that is used for many pieces of lawn and garden equipment in a host of different ways. Screws such as this one are used to hold two components together. If the screw is not affixed properly or if there is an issue with the screw itself, it could affect the stability of the machine. If it is missing or not tight, it might also result in added noise when the machine is in use.Screws are made from metal and can last for a long time. However, if the threads are stripped or if the head of a screw wears down, it should be replaced. There is also the chance of corrosion or of losing the screw when working on the machine.This part is sold individually, and it can work well for a range of different machines from MTD, Craftsman, Bolens, and Yard Machines. This is a genuine OEM replacement part that is from the manufacturer.

Also called a bump head, the string trimmer bump knob is used as a means to move the line on a trimmer forward in the spool. These pieces can start to wear out over time or become damaged when using the machine. Those who find that their trimmer is no longer properly feeding the string or cutting line may have a failed string trimmer bump knob that needs to be replaced. The OEM string trimmer bump knob replacement is sold individually, and it tends to be an easy repair. This durable knob is made from plastic and steel. It can be used for string trimmers from a range of brands including Craftsman, Ryobi, Murray, Yard Machines, Troy-Bilt, Bolens, and Yard-Man.

This blade assembly is a genuine MTD part. It is also called a line cutter. It is used on handheld trimmers. The part includes two screws, two nuts, and the blade itself.The blade attaches to the shield and cuts the trimmer line while in use. It is normal for the blade to become dull and worn over time. The blade can be sharpened, but in many cases it is simpler, more effective, and safer to replace the blade instead.This blade is a genuine OEM part directly sourced from the manufacturer and is sold individually (includes the blade, screws, and nuts). It is made for compatibility with machines made by Bolens, Craftsman, Cub Cadet, McCulloch, MTD Pro, Ryobi, Troy-Bilt, Yard Machines, and Yard-Man.

This replacement screw is useful for many different types of handheld outdoor equipment. Screws are used as a means to hold parts of the machine together. The screws also help to reduce the amount of vibration that occurs in the machine.These screws are used in outdoor equipment, so there is a chance they could corrode over time. In some cases, the screws may also lose their thread, or the heads of the screws could start to become worn down. Owners who notice issues with the screws, or who notice a missing screw should replace them to ensure the proper function of the machine. Failure to replace damaged screws could result in more difficulty replacing them after they wear down further.The screw works on various types of equipment including blowers and trimmers. It is compatible with a range of brands including Murray, Craftsman, Yard Machines, Bolens, Yard-Man, Craftsman, Ryobi, and McCulloch. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

This is a trimmer head used with string trimmers, weed wackers, and edgers. When in use, it rotates, cutting grass. If the trimmer head stops rotating or cutting grass, it is time to order a replacement part. In order to complete the replacement process for trimmer heads, the user will need to pry the trimmer head off of the trimmer. Use a flathead screwdriver to loosen it. After pulling the old trimmer head off the nut on the bottom of the shaft, insert this replacement head onto the trimmer shaft.This trimmer head is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with brands such as Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Bolens, and Yard-Man.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. Screws are found in almost every different type of machinery and are essential to the overall performance of different devices. Screws are responsible for holding things in place and securing them tightly so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is damaged or missing. It is possible for screws to be stripped over time and can become stuck in place. In this case, pliers might be needed to remove the faulty screw. Otherwise, this repair should be fairly simple and only require a screwdriver. Be sure the machine is powered down before replacing this part. This specific screw is sold individually and is a genuine OEM replacement part. Be sure to purchase the correct amount as many devices require more than one.

This part is a replacement blade driver. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken blade driver in line trimmers.Blade drivers help to ensure the line trimmer blade rotates on the gearbox shaft and so is an essential component and should be replaced if faulty. This part may become corroded, worn, jammed, or otherwise damaged over time, requiring replacement. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular blade driver, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This blade driver can be used with a variety of line trimmer models manufactured by Craftsman, MTD, Troy-Bilt, and other brands.

This breather hose is a component that makes up part of the ventilation system for the crankcase with lawn and garden tools. It has a single way valve that prevents excess exhaust gases from transferring to the engine. A reed is included to help lubricate the piston as the hose moves oil to the crankcase. The tube is made with special fibers that filter and cool the air to prevent the engine from overheating.If oil is leaking from lawn and garden equipment, this can indicate that the breather hose needs to be cleaned or has been damaged. If it is dirty, it will often create blue smoke that leaves the exhaust pipe. If the smoke is dark, this is a sign that the breather hose may be damaged and need replacement. Inspect the hose to see if it looks dirty or damaged so a replacement can be made if needed.This breather hose is an OEM replacement component directly sourced from the manufacturer. It is a single individual hose. The breather tube can be used with lawnmowers, tillers, string trimmers, edgers, and leaf blowers by Yard-Man, Craftsman, Cub Cadet, Bolens, Ryobi, Troy-Bilt, Murray, MTD, and Yard Machines.

This is a high-quality retainer that is typically used in string trimmers. It is made of durable metal and fits in the area between the outer spool assembly and the spring on the trimmer. The purpose of the retainer is to ensure the spool stays in the correct location while the string trimmer is being used. This component can become damaged, break, or be lost and will need to be replaced in order to be sure the spool is supported and secure.If there is an issue with the string trimmer retainer, it can cause excessive noise during use. It also may prevent the trimmer from starting if other components are affected. A wrench and work gloves may be required to replace the part. Gain access to the retainer and remove it using the wrench. The new replacement part can be installed in the same place. Reassemble other parts, and the trimmer will be ready to use.This retainer is designed to fit string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, MTD, and Yard-Man. It is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer.