Parts for Amana AMV5164BAB: 01 - Base / Internal Controls Parts

The Grease Filter is an OEM part for Whirlpool range hoods. This component is crucial for capturing grease particles and preventing them from accumulating in the ventilation system, ensuring proper airflow and maintaining kitchen cleanliness. The grease filter measures approximately 14 inches by 6 inches

Over time, grease filters can become saturated with grease and debris, reducing their effectiveness and potentially causing ventilation issues.

Symptoms of a bad grease filter include:

• Decreased airflow through the range hood
• Visible grease buildup on the filter
• Unpleasant odors lingering in the kitchen
• The filter appearing worn or damaged

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Microwave Door Lever Switch is essential for maintaining the proper function of your microwave. This genuine OEM part ensures your appliance operates safely by controlling the door mechanism. When the door is open, the lever switch prevents the microwave from running, enhancing safety in your kitchen. Crafted with durability in mind, this switch provides long-lasting performance, reducing the need for frequent replacements. Installing the Microwave Door Lever Switch is straightforward, allowing you to quickly restore your microwave's functionality without hassle. It is compatible with a variety of Samsung microwave models, ensuring a perfect fit and seamless integration. By choosing this genuine OEM part, you guarantee the reliability and efficiency of your microwave, helping you enjoy consistent cooking results. Enhance your microwave's performance and safety with the Microwave Door Lever Switch , a dependable solution for your appliance repair needs.

This door interlock microswitch detects when the microwave door is fully closed and allows the unit to run only under safe conditions. Replacing a worn switch restores reliable starting and consistent operation tied to the door latch.

• Monitors the door-latch position and completes the safety interlock circuit when the door is closed
• Helps prevent operation with the door open
• Common symptoms: microwave won't start or stops when the door is moved; requires pushing/jiggling the door to run
• Contributes to "runs but no heat" or light/fan behavior that changes as the door is opened/closed

• Unplug the microwave before service; internal high-voltage components can retain a dangerous charge
• Access the switch at the door-latch assembly; transfer wires one at a time to the new switch to maintain correct positions
• Ensure the actuator aligns with the door latch and that the switch clicks freely when opening/closing the door
• After reassembly, test with a microwave-safe cup of water to ensure proper operation

The Microwave Door Switch is an essential component for maintaining the safe and efficient operation of your microwave. This genuine OEM part ensures a perfect fit and reliable performance, specifically designed for Samsung microwave models. By accurately detecting when the microwave door is closed, it prevents the appliance from running when open, enhancing safety in your kitchen. The Microwave Door Switch is built to withstand regular use, offering durability and long-lasting functionality. Easy to install, this switch allows you to quickly restore your microwaveGÇÖs performance without the need for professional assistance. Choosing this genuine OEM part guarantees compatibility and peace of mind, as it meets SamsungGÇÖs exacting standards for quality and reliability. Whether youGÇÖre replacing a faulty switch or performing routine maintenance, the Microwave Door Switch provides a dependable solution to keep your microwave operating smoothly and safely.

This microwave magnetron generates the RF energy that heats food. If your unit runs but won't heat—or makes a loud hum—the magnetron may be at fault. Replace this assembly to restore dependable heating.

• Produces microwave energy as part of the high-voltage system to heat food
• Typical failure symptom: runs but does not heat
• Loud humming or buzzing during a cook cycle
• Burning smell, arcing, or scorch marks near the waveguide/magnetron
• Trips the breaker or blows an internal fuse at start when shorted

• Disconnect power before service; the high-voltage capacitor can retain a dangerous charge—discharge it properly
• Note wire orientation and mounting; transfer any original brackets/insulators as required; install in the same orientation
• Handle by the body only; do not touch or chip the ceramic antenna
• Inspect the waveguide and cavity cover for signs of arcing and correct any damage before use

The Microwave Mounting Nut Assembly is an essential component for securing your microwave in place. Designed specifically for Samsung microwave models, this genuine OEM part ensures a perfect fit and reliable performance. The durable construction of the ASSEMBLY HOLDER-NUT provides strong support, keeping your appliance stable and safely mounted. Installing this mounting nut assembly is straightforward, allowing you to restore your microwaveGÇÖs functionality without hassle. Whether you are replacing a worn-out part or repairing a damaged mount, the Microwave Mounting Nut Assembly offers a dependable solution. Using a genuine OEM part guarantees compatibility and maintains the integrity of your microwave, preventing potential issues from inferior replacements. This assembly holder-nut not only enhances the safety of your kitchen setup but also contributes to the overall efficiency of your appliance. Trust in the quality and precision of the Microwave Mounting Nut Assembly to keep your microwave securely in place and operating smoothly for years to come.

This main damper assembly regulates airflow between compartments to help maintain proper refrigerator temperatures. It replaces a worn or stuck damper to restore controlled air delivery for more consistent cooling performance. What it does:

• Controls the amount of cold air flowing from the freezer into the fresh-food compartment
• Helps stabilize internal temperatures when opening/closing doors or during mode changes
• Commonly fails by sticking open or closed, causing warm fresh-food temps or overcooling
• Works with the refrigerator's control system to modulate airflow based on demand

• Disconnect power before beginning any service to avoid electrical shock
• Handle the damper flap and cable/gear gently to prevent damage during installation
• Inspect surrounding seals and mounting points; secure all fasteners and reconnect any harnesses
• After installation, restore power and verify proper operation across temperature settings

Dimensions 6 1/8" X 4"

The Microwave Roller Guide Assembly is an essential component for maintaining the smooth operation of your Samsung microwave. This genuine OEM part ensures precise alignment and stability for the microwave door, allowing it to open and close effortlessly. Crafted from durable materials, the Roller Guide Assy is designed to withstand regular use, providing long-lasting performance and reliability. Installing this assembly helps prevent misalignment and reduces wear on other microwave parts, extending the lifespan of your appliance. Compatible with a wide range of Samsung microwave models, the Microwave Roller Guide Assembly offers a perfect fit and easy installation process. Whether your original guide rollers are worn out or damaged, replacing them with this genuine OEM part restores your microwave's functionality and ensures optimal performance. Enhance your microwave's efficiency and durability with the reliable Microwave Roller Guide Assembly .