Parts for Ge RSK25LAPCCCC: 02 - Fresh Food Door Parts

This stop door is the dispenser closure that helps control and seal the ice/water opening so the dispenser stays closed when not in use. It restores proper sealing and prevents drafts or drips from the dispenser area. What it does:

• Closes and seals the dispenser opening to help stop air exchange and reduce moisture entry
• Moves with the dispenser actuator to expose the chute only during dispensing
• Helps prevent water or ice from dripping when the dispenser is idle
• Reduces airflow that can cause frost or temperature issues in the dispensing area

• One stop door

• Disconnect power to the appliance before starting any repair
• Remove dispenser cover/panel per your model's service instructions to access the stop door assembly
• Inspect mounting pins and the actuator linkage; replace any broken fasteners for proper operation
• Handle plastic components carefully to avoid cracking; re-test dispenser operation after reassembly

Fresh food side. Color: white. For the same part in black, purchase WR02X10779.

The Fresh Food Door Gasket is an OEM replacement part for GE refrigerators. It forms an air-tight seal around the fresh food door preventing air and moisture exchange between the refrigerator interior and exterior. The gasket helps to maintain the ideal temperature and humidity levels inside for optimal food storage.

Causes of a bad gasket can include cracks, tears, or worn-away sections compromising the air-tight seal over time. Exposure to heat, moisture, or chemicals during cleaning may also degrade sealing qualities.

Symptoms of a bad gasket include:

• Cool air leaking from around the door
• Interior surfaces becoming wet or frosty
• Difficulty maintaining proper interior temperature settings

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dairy Door is an OEM replacement part for GE refrigerators. It serves as a sealed storage compartment ideal for keeping dairy and other perishable items colder longer. 

Color: clear. Measures about 16 inches wide by 8 inches high.

The dairy door houses precision-engineered vents, seals, and insulation optimized for maintaining a dedicated cold zone of around 33°F. tall shelves and wide doors maximize capacity.

Symptoms of a failing door include:

• Temperature in dairy bin fluctuating outside the normal cold range  
• Seals no longer provide an air-tight barrier to prevent warm air entry
• Warping, cracks, or cosmetic wear developing on door surfaces

Causes may be severe temperature changes over time putting stress on materials, or general wear and tear from repetitive opening/closing motions.

This dairy compartment is the dedicated storage bin on your refrigerator's fresh food door for butter and other small items. Replacing a cracked or missing dairy bin restores secure, convenient door storage and keeps contents organized.

• Mounts on the refrigerator door to hold butter and small items
• Helps keep contents contained during normal door opening and closing
• Restores proper storage when the original bin is cracked, warped, or missing
• Addresses issues like broken tabs or a bin that won't stay attached

• Remove the old bin by lifting it up and out of the door liner channels
• Align the new bin with the door slots or hooks and press/snap into place
• If your model uses screws or retainers, transfer and reuse them
• Handle plastic tabs gently and ensure the bin is fully seated before loading

The Door Bin is an OEM part for GE refrigerators. It is a convenient storage compartment located on the interior of the refrigerator door, designed to hold and organize smaller items such as condiments, jars, or beverages.

Symptoms of a faulty door bin:

• Cracks or breaks in the bin itself
• Difficulty in removing or inserting the bin
• Loose or misaligned fit within the door
• Leaks or spills from the bin

Causes of a bad door bin can include physical damage from impact or excessive force, general wear and tear over time, or issues with the mounting brackets or support mechanisms.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models. 

The Door Bin is an OEM part for GE refrigerators. This door bin is designed to fit onto the inner door panel of the refrigerator, providing convenient storage for condiments, bottles, and other items that need to be easily accessible. The use of this bin helps to maximize the storage capacity of the refrigerator, keeping items organized and within reach. 

Causes of damage to the door bin often include overloading it with too much weight, which can lead to stress cracks or breakage. 

Symptoms of a bad Door Bin include:

• Cracks or breaks in the bin 
• The bin not fitting properly onto the door panel 
• Difficulty in sliding the bin in and out or removing it for cleaning 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement trim fits the dairy compartment on the refrigerator door. It restores a clean, finished look and proper fit of the butter/dairy bin so contents stay organized and the area opens and closes smoothly.

• Attaches to the front edge of the dairy/butter bin on the fresh food door to provide a finished, secure fit
• Replaces cracked, warped, or missing trim that can cause gaps, rattling, or a loose dairy compartment
• Helps keep small items from sliding out when opening/closing the door
• Built to match the original mounting points for straightforward replacement

• Disconnect power to the refrigerator before servicing
• Open the fresh food door; release tabs or remove any retaining screws to take off the old trim
• Align the new trim with the mounting points and snap in or reinstall existing hardware
• Handle plastic tabs carefully and avoid overtightening screws

The Door Bin Front is an OEM part for GE refrigerators. This component serves as the front barrier for door bins, helping to keep stored items in place and preventing them from falling out when the door is opened or closed. This front measures approximately 13 inches wide by 3-1/2 inches high.

Common causes of a bad door bin front include cracking due to impact, stress from heavy items, or general wear and tear from frequent use.

Symptoms of a bad door bin front include:

• Items falling out of the door bin
• The bin front appearing loose or detached
• Visible cracks or breaks in the plastic
• Difficulty in securing the bin front to the door bin

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement screw fastens refrigerator components securely, restoring a tight, rattle-free fit when original hardware is missing, stripped, or corroded. Use it to secure panels, brackets, or trim and keep parts properly aligned.

• Secures panels, brackets, covers, or trim in place
• Helps maintain correct alignment of components and hardware
• Reduces vibration and rattling caused by loose or missing screws
• Replaces lost, rusted, or stripped screws

• Unplug the refrigerator and turn off water supply if working near water components
• Match thread and length to the removed fastener; hand-start threads to avoid cross-threading
• Tighten snugly; do not overtighten into plastic or thin sheet metal
• Keep track of any spacers or washers reused from the original assembly