Parts for Amana ALG331RMW / PALG331RMW: 04 - Front Bulkhead, Air Duct & Drum Parts

The Dryer Drum Felt Seal is an OEM part for Whirlpool dryers. This seal ensures a tight fit between the dryer drum and the rear bulkhead, preventing air leaks and maintaining proper drum alignment during the drying cycle. The seal measures approximately 36 inches in length and 1 inch in width. Please note, adhesive for installation is not included. 

Causes of a bad felt seal can include friction from the rotating drum, exposure to high temperatures, or general wear and tear over time.

Symptoms of a bad felt seal include:

• Clothes getting caught or torn during the drying cycle
• Increased drying times due to air leaks
• Unusual noises such as scraping or squeaking
• Visible gaps or tears in the felt seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For adhesive order WPY055980.

The Dryer Drum Glide is an OEM replacement part for Whirlpool dryers. It is designed to facilitate smooth rotation and movement of the dryer drum during operation. The glide supports the drum, reducing friction and ensuring proper alignment.

Causes of a bad dryer drum glide can include wear and tear over time, exposure to excessive heat or vibration, or damage from foreign objects or improper installation.

Symptoms of a bad dryer drum glide:

• Loud rumbling or grinding noises during the drying cycle
• Excessive vibration or shaking of the dryer
• Difficulty in rotating the drum manually
• Uneven drying or clothing becoming tangled

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dryer Glide Felt Pad is an OEM part for Whirlpool dryers. It is located at the front of the dryer drum. It provides a smooth surface for the drum to glide on, reducing friction and allowing it to rotate freely. This helps to prevent excessive wear and noise during the drying cycle.

Causes of a faulty or damaged dryer glide felt pad can include regular wear and tear, accumulation of lint or debris, or accidental mishandling. These factors can result in issues such as squeaking or grinding noises, uneven drum rotation, or damage to the drum.

Symptoms of a bad dryer glide felt pad may include:

• Squeaking or grinding noises during operation
• Uneven drum rotation or wobbling
• Excessive wear or damage to the drum

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

A replacement bracket glide that secures and guides an appliance drawer or shelf glide so drawers open and close smoothly. Installing a new bracket restores proper alignment and helps prevent sticking, sagging and noisy operation. What it does:

• Supports and guides the drawer/glide assembly for smooth, even movement.
• Keeps the drawer aligned so it does not bind, tip or come off the track.
• Reduces scraping, grinding or rattling noises caused by a damaged bracket.
• Common symptom: drawers that stick, sag, pull to one side, or feel loose.

• Disconnect power (or unplug) and empty the drawer before you start.
• Remove the drawer or access panel to reach the bracket; basic hand tools are usually required.
• Retain original fasteners unless the replacement explicitly includes new hardware.

The Dryer Lint Filter is an OEM part for Whirlpool dryers. This filter is designed to capture lint and debris from the clothes during the drying cycle, preventing it from clogging the dryer vent and ensuring efficient airflow. Proper maintenance of the lint filter helps improve the dryer's performance and reduces the risk of fire hazards caused by lint buildup.

Over time, the lint filter can become damaged, torn, or clogged with excessive lint and debris. Common causes of a bad lint filter include wear and tear from regular use, damage from improper cleaning, or excessive lint buildup that is difficult to remove.

Symptoms of a bad dryer lint filter include:

• Visible tears or holes in the filter
• Lint not being captured effectively, leading to clogged vents
• The dryer taking longer to dry clothes due to restricted airflow
• The filter not fitting securely in its slot

This OEM part is also compatible with some Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This upper and lower air duct assembly includes the lint screen.

This upper and lower air duct assembly includes the lint screen.