Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Parts for Maytag MUG2000AWW: 05 - Cabinet-Rear (Washer) Parts

Parts for Maytag MUG2000AWW: 05 - Cabinet-Rear (Washer) Parts

Location on Diagram
Part Description
Price & Availability
1
By: Whirlpool
Part Number: 22003582

Color: White

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

1
By: Whirlpool
Part Number: 22003639

Color: White This part has been discontinued and is no longer available.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

1
Product photo
5.0 (2)
By: Whirlpool
Part Number: WP22004095
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

1
5.0 (2)
By: Whirlpool
Part Number: W11573574

Secures panels and components in place. Replace this fastener if stripped, corroded, or missing to restore proper alignment and eliminate rattling.

More
$21.46

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
2
Product photo
4.8 (4)
By: Whirlpool
Part Number: WP22002437

If your washer dryer combo fills improperly, overfills, or leaks water when off, the water inlet valve likely failed. This 4-coil valve repair takes 1 hour.

More
$178.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
3
By: Whirlpool
Part Number: 22002436
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

4
Product photo
5.0 (6)
By: Whirlpool
Part Number: WP489503

This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.

  • Fastens a hose to a barb or port to prevent leaks
  • Helps keep hoses from slipping off due to vibration or pressure
  • Restores proper sealing when a clamp is rusted, bent, or stripped
  • Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten
What's included: 1 hose clamp Install notes:
  • Disconnect power and shut off the water supply before servicing
  • Place a towel to catch residual water when removing hoses
  • Position the clamp just behind the hose barb/bead and secure with the appropriate tool
  • Restore water and power, then run a quick check for leaks at the connection

More
$7.49

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
5
Product photo
By: Whirlpool
Part Number: 33002212
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

6
Product photo
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$9.05

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
7
Product photo
By: Whirlpool
Part Number: 33002213
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

8
5.0 (2)
By: Whirlpool
Part Number: W11573574

Secures panels and components in place. Replace this fastener if stripped, corroded, or missing to restore proper alignment and eliminate rattling.

More
$21.46

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
9
Product photo
By: Whirlpool
Part Number: 22002022
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

10
Product photo
By: Whirlpool
Part Number: 22002092
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

11
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP67006908

Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
12
Product photo
By: Whirlpool
Part Number: WP489128

Screw: 8-16 x 3/8 inch.

More
$9.05

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
13
Best Seller
Product photo
4.8 (15)
By: Whirlpool
Part Number: WP89503

Size: 5 foot long. Rubber fill hose used on most automatic washing machines. Two hoses used per machine.

More
$19.31

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
14
Product photo
5.0 (1)
By: Whirlpool
Part Number: WP22002960

Filters debris and sediment from incoming water before it reaches the inlet valve. Replace if clogged or missing to restore proper fill flow. Confirm fit.

More
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

14
Product photo
5.0 (3)
By: Whirlpool
Part Number: WPY013783

This is a rubber gasket that sits inside the water inlet hose connection on your washing machine. It creates a watertight seal between the hose fitting and the water supply valve to prevent leaks. Replace this gasket if you notice water dripping from the hose connections at the back of the washer.

More
$6.72

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
15
Product photo
By: Whirlpool
Part Number: 22002704
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

16
5.0 (2)
By: Whirlpool
Part Number: W11573574

Secures panels and components in place. Replace this fastener if stripped, corroded, or missing to restore proper alignment and eliminate rattling.

More
$21.46

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
17
Best Seller
Product photo
4.9 (17)
By: Whirlpool
Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Water leaks around the hose connection points
  • The hose slipping off the fitting
  • Visible rust or wear on the clamp
  • Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

More
$9.63

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
18
Product photo
By: Whirlpool
Part Number: WP22002892
$30.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
18
By: Whirlpool
Part Number: 22002085
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

18
Product photo
By: Whirlpool
Part Number: 8539404
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

18
Product photo
5.0 (2)
By: Whirlpool
Part Number: 12001807

Replacement drain hose for washers. Routes wastewater from the drain pump to your household drain. Replace if cracked, leaking, clogged, or worn.

More
$37.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
19
By: Maytag
Part Number: 215950
Not available

This part is discontinued by the manufacturer and is no longer available for purchase.

  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google