Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Maytag Washer Dryer Combo Parts

Best Seller
Maytag Dryer Cycling Thermostat
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387134

This Dryer Cycling Thermostat is an OEM replacement part for Whirlpool dryers. It monitors internal temperatures and cycles power to the heating element accordingly. The thermostat ensures the drying air reaches and maintains the optimal heat level selected for fast, effective drying results.

Symptoms of a bad cycling thermostat include:

  • The dryer not heating or heating inconsistently  
  • Frequent trips of the circuit breaker
  • Slower than normal drying times
  • Burned clothes due to overheating

Causes of failure may be related to normal wear over time, dust buildup affecting sensor readings, or incorrect thermostat calibration. 

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Too hot
  • Timer will not advance
  • Takes too long to dry
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You My 22 year old dryer just stopped getting hot   Michael M. • Brunswick , GA • November 04, 2015

After 22 years my Kenmore (Whirlpool) dryer stopped getting hot. So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat. Here is a rundown of what I did and how long it took: • Taking the back off and vacuum <1 minute • Finding the components (from the... Read more

More
$26.95
Compare At:
$32.34
You Save:
$5.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Gas Valve Coil Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279834

The Dryer Gas Valve Coil Kit is an OEM replacement part for Whirlpool dryers, as well as Kenmore and Samsung dryers. It is a set of coils that control the flow of gas fuel to the burner. The gas valve regulates the precise amount of gas needed to properly combust and generate heat for drying clothes. 

Causes of a bad gas valve coil can be wear and tear from regular use, lime or mineral buildup on the coils over time, or physical damage to the coils.

Symptoms of a bad gas valve coil kit include:

  • Inconsistent or incomplete drying  
  • Slow or intermittent drying
  • Burning smell from the gas dryer
  • Improper burner ignition or non-ignition

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Timer will not advance
  • No heat or not enough heat
  • Shuts off too soon
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Flame to dry clothes would go out after about a minute and wouldn't reignite   Wendell M. • Brown Deer , WI • June 19, 2014

I'm starting with a quick background on my dryer. About 18 months ago the belt on the dryer started slipping and squealing. I had a can of belt dressing spray so I popped the top open and sprayed the belt. It actually worked for about a year before it started squealing again. For the next 6 months I had to spray it more and more often. Then the clothes stopped drying. Obviously, at this point, I had to get off my lazy ass and fix the dryer. Searched my dryer's model number on the internet and... Read more

More
$27.21
Compare At:
$32.11
You Save:
$4.90

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Washer Agitator Dogs
Genuine Whirlpool part
By: Whirlpool
Part Number: 80040

The Washer Agitator Dog set is a set of 4 OEM replacement parts for Whirlpool and Kenmore washing machines, designed to engage the agitator, allowing it to move in one direction and lock in the opposite direction. The agitator dogs also come available in the agitator repair kit WP8537433. Check your model number for compatibility.

Symptoms of failing Agitator Dogs include:

  • The agitator not moving
  • Only moving in one direction
  • Clothes not getting cleaned due to lack of agitation
  • Clothes becoming tangled

Causes of bad Agitator Dogs can range from normal wear and tear, which gradually erodes their teeth, making them too smooth to engage the agitator properly, to overloading the washing machine, which puts extra stress on the agitator and accelerates the wear of the dogs.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Will not agitate
  • Spins slowly
See more...
Do-It-Yourself Stories from Customers like You Whirlpool lsr7233eq0 washing machine was leaking out the bottom   Jerald F. • Laud Lakes , FL • April 05, 2015

I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the... Read more

More
$6.45
Compare At:
$7.68
You Save:
$1.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Whirlpool Direct Drive Washer Motor Coupling
Genuine Whirlpool part
By: Whirlpool
Part Number: 285753A

The Direct Drive Washer Motor Coupling is an OEM replacement part for Whirlpool washers. It is responsible for connecting the motor to the transmission, allowing the washer to agitate and spin the clothes during the wash and spin cycles.

A bad motor coupling can be caused by prolonged use, heavy loads, or overloading the washer. It can also wear out or break over time due to normal usage.

Symptoms of a bad motor coupling include:

  • The washer not agitating or spinning.
  • Unusual noises, such as grinding or rattling, during operation.
  • The motor running but the drum not moving.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Pumps but will not spin
  • Will not agitate
  • Burning smell
  • Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You Whirlpool washer direct drive motor coupling had gone bad and washer was not spinning or agitating   Aaron P. • Fort Meade , MD • July 26, 2014

My whirlpool washer was no longer spinning, so my first stop was YouTube where I found the video from AppliancePartsPros showing how to replace the motor coupling. In addition to the replacement guide, Matt also shows you how to diagnose the problem by looking for rubber shavings under the washer. Seeing the rubber shavings under the washer, combined with the fact that the washer still drained meant that the motor was still working, so something else in the drive train was bad. I took the... Read more

More
$20.95
Compare At:
$24.93
You Save:
$3.98

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Drum Support Roller
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001541

The Drum Support Roller is an OEM replacement part for Whirlpool dryers that is responsible for supporting the drum and allowing it to rotate smoothly. Causes of a bad Drum Support Roller can include lint and debris that accumulates and causes the rollers to malfunction or seize.

Causes of bad Drum Support Rollers can include wear and tear over time, excessive load imbalances, or physical damage from impact or mishandling.

Symptoms of a bad Drum Support Roller include:

  • Unusual noises, such as thumping or squealing.
  • The dryer drum struggling to rotate or not turning smoothly.
  • Increased vibration or shaking of the dryer during operation.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Dryer squealing on startup   Sandy R. • Manhattan , KS • September 08, 2015

I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things... Read more

More
$20.95
Compare At:
$30.18
You Save:
$9.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Clutch Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: 285785

The Clutch Assembly is an OEM replacement part for Whirlpool washing machines. It is a component that is responsible for transferring power from the motor to the transmission, allowing the washer tub to spin during the wash and spin cycles.

Symptoms of a bad Clutch Assembly include:

  • The washer tub not spinning or agitating during the wash or spin cycles
  • Loud grinding or screeching noises coming from the washer
  • Excessive vibrations or shaking during the spin cycle
  • The washer failing to start or complete the wash or spin cycles properly

Causes of needing to replace the clutch assembly can include normal wear and tear over time, bearing failure, or physical damage due to impact or overloading.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

This part fixes the following symptoms
  • Spins slowly
  • Pumps but will not spin
  • Burning smell
See more...
Do-It-Yourself Stories from Customers like You My whirlpool washer would not spin   Glen T. • Hamilton , IN • November 16, 2015

A couple of years ago, I had an issue with my Whirlpool washer which is every bit of 18 years old. I checked the internet for what might be wrong and stumbled across some how to videos on how to fix it. So, the other day, when my washer quit spinning the first thing I did is go to the internet again to see if I would be able to fix again. Thank you, Appliance Part pro.com, for your very helpful website with the very informative video's on how to replace parts! After I watched a... Read more

More
$36.62
Compare At:
$49.93
You Save:
$13.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Dryer Igniter Kit And Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: 279311

The Igniter Kit and Bracket is an OEM replacement part for Whirlpool dryers. It is a kit that includes the igniter and bracket assembly, which work together to ignite the gas or electric heating element. 

Causes of a bad igniter and bracket can include failure due to prolonged or repeated use, damage from impact or mishandling, or failure of integrated electronic components. 

Symptoms of a bad igniter and bracket include: 

  • The dryer not heating or heating intermittently
  • Repeated trips of the thermal fuse 
  • Smell of gas indicating improper ignition
  • Visible damage or cracks in the igniter or bracket

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes   Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

More
$35.58
Compare At:
$42.70
You Save:
$7.12

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Whirlpool Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: 661570V

The Drive Belt is an OEM replacement part for Whirlpool dryers. This essential component is responsible for transferring power from the dryer's motor to the drum, allowing it to spin and tumble the clothes during the drying cycle.

Symptoms of needing to replace the drive belt include:

  • The dryer drum not spinning or rotating
  • Loud squeaking or grinding noises during the drying cycle
  • Excessive vibration or shaking from the dryer
  • Clothes taking longer to dry or remaining damp

Causes of a faulty drive belt can include normal wear and tear over time, exposure to excessive heat or lint buildup, or physical damage due to impact or mishandling.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.

This part fixes the following symptoms
  • Will not tumble
See more...
Do-It-Yourself Stories from Customers like You I had no error code, it is just that when you press start you would hear a click and no actions.   Nicholas M. • Miami , FL • June 12, 2020

It was the day of my birthday June 6th when my wife came to me to tell me that the dryer was not working. Immediately I started to look for a new dryer from Best Buy and the rest. Then I said It would be better if I waited for 4th of July at which time I could find a better deal. This is when I decided to take it apart to see what was wrong. Initially, I thought of the belt that could be broken and I rotated the drum by hand and I heard a noise of the belt at times falling on the drum. I was... Read more

More
$39.29
Compare At:
$47.15
You Save:
$7.86

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Door Latch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279570

The Door Latch Kit is an OEM replacement part for Whirlpool washers. This component is responsible for securely locking the washer door during the wash cycle, preventing it from opening unexpectedly and ensuring a safe and efficient operation.

Symptoms of needing to replace the door latch kit include:

  • Difficulty in closing or latching the washer door
  • Door opening unexpectedly during the wash cycle
  • Leaks or water seeping due to an improper door seal
  • Excessive wear or damage to the latch components

Causes of a faulty door latch kit can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the door alignment or strike plate.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

This part fixes the following symptoms
  • Door won't close
  • Shuts off too soon
  • Doesn't shut off
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Dryer door latch worn out   Kathy M. • San Diego , CA • February 22, 2015

When I looked up the part number there was a handy video that popped up. I watched the video and thought "how easy!" so, I ordered that part and waited. The next day, I thought I better start to take the door off of my dryer (because that's what the video instructed, and I wanted a head start) so as I was going into the garage to get my tools, my son came in with a small package. It was the part. That came, to quote another customer, "Crazy Fast!" All the way from Kentucky to California! ... Read more

More
$6.95
Compare At:
$13.85
You Save:
$6.90

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Moisture Sensor Bar
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387223

The Moisture Sensor Bar is an OEM replacement part for Whirlpool dryers. It is a component located inside the dryer drum that senses the moisture level of clothes during tumble drying cycles. The moisture sensor bar utilizes sensors or probes to gauge how dry clothes are getting and signals the dryer to shut off once clothes reach the desired dryness level selected by the user.

Symptoms of a bad moisture sensor bar include:

  • Dryer failing to shut off automatically at the end of cycles, leaving clothes over-dried
  • Cycles taking excessively long to complete 
  • Dryer not sensing moisture levels properly to allow automatic ending of cycles

Causes of a faulty moisture sensor bar are usually due to normal wear and tear over time. Dust or lint buildup can also affect its ability to provide accurate readings.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

Do-It-Yourself Stories from Customers like You First longer to dry then no heat in dryer   Bobbie M. • King George , VA • October 06, 2017

I am not an electrician, just a housewife with limited funds and a desire to DIY. I used the provided videos for knowing how to replace everything except the heating element which I just guessed based on other reviews and seeing how the other parts worked. Our dryer is 11 years old Whirlpool Gold HE and I have only ever cleaned the lint tray. My husband replaced the belt about five years ago and he did clean out the inside of the dryer. Started by ordering a thermal fuse because it was... Read more

More
$9.95
Compare At:
$11.74
You Save:
$1.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Idler Pulley
Genuine Whirlpool part
By: Whirlpool
Part Number: 279640

The Idler Pulley is an OEM replacement part for Whirlpool dryers. This essential component plays a crucial role in the drum drive system, helping to guide and maintain proper tension on the dryer belt.

Causes of a faulty idler pulley in a dryer can include normal wear and tear over time, improper belt tensioning leading to bearing failure, or physical damage from impact or debris buildup.

Symptoms of needing to replace the idler pulley include:

  • Squeaking or grinding noises from the driveability area
  • The dryer drum not spinning or rotating properly
  • Excessive vibration or shaking during the dryer cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models. 

Do-It-Yourself Stories from Customers like You I had no error code, it is just that when you press start you would hear a click and no actions.   Nicholas M. • Miami , FL • June 12, 2020

It was the day of my birthday June 6th when my wife came to me to tell me that the dryer was not working. Immediately I started to look for a new dryer from Best Buy and the rest. Then I said It would be better if I waited for 4th of July at which time I could find a better deal. This is when I decided to take it apart to see what was wrong. Initially, I thought of the belt that could be broken and I rotated the drum by hand and I heard a noise of the belt at times falling on the drum. I was... Read more

More
$25.95
Compare At:
$31.14
You Save:
$5.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Blower Wheel Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: Y303836

The Blower Wheel Assembly is an OEM part for Whirlpool dryers, designed to circulate air through the drum and out the vent. This part is responsible for the movement of hot air across the clothes to evaporate moisture so that clothes dry evenly and quickly.  

Causes of a bad Blower Wheel Assembly can include debris buildup leading to wear and tear on the fins or a damaged hub disconnecting the wheel from the motor shaft. 

Symptoms of a bad Blower Wheel Assembly include:

  • Unusual noises when the dryer is running.
  • Clothes taking longer to dry or not drying fully.
  • The dryer overheating due to restricted airflow.
  • A noticeable decrease in the exhaust.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Very concerning loud thumping noise while running our dryer.   William M. • Sudbury , MA • July 20, 2019

In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future. I was wrong. I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity. I found out... Read more

More
$20.95
Compare At:
$27.20
You Save:
$6.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Flame Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

  • The dryer not heating or producing heat properly
  • Error codes related to the gas system or ignition failure
  • The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

This part fixes the following symptoms
  • Shuts off too soon
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes   Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

More
$34.95
Compare At:
$41.59
You Save:
$6.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Tumbler Bearing Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 306508

The Tumbler Bearing Kit is an OEM replacement part for Whirlpool washing machines. It includes multiple replacement glides that support the movement of the wash basket or tub. As it rotates during the wash cycle, the tub experiences friction that the bearings help manage.  For rear drum support rollers, order 12001541. Please note that repair requires two kits.

Symptoms of bad bearings include:

  • Excessive noise or vibrations emanating from the tub area
  • Difficulty rotating or spinning the tub by hand  
  • Visible wear on the bearings
  • Premature breakdown of other components due to increased stress

Causes of bearing failure can be normal wear over time from the consistent rotational motion. Using the washer with an unbalanced load can accelerate bearing deterioration.

This OEM Whirlpool kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

Do-It-Yourself Stories from Customers like You Dryer squealing on startup   Sandy R. • Manhattan , KS • September 08, 2015

I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things... Read more

More
$13.59
Compare At:
$21.82
You Save:
$8.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Pump And Drive Belt Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12112425

The Pump and Drive Belt Kit is an OEM replacement part for Whirlpool washing machines. The Pump and drive belt kit is responsible for helping to drain water from the washer drum during the wash cycle. The pump and drive belt kit works by powering the washer's pump to remove water from the drum and out of the washer. The drive belt provides the power to turn the pump, while the pump helps to drain the water. The kit includes 1 pump belt and 1 drive belt.

This part fixes the following symptoms:

  • Standing water in the washer drum
  • Ineffective or non-existent water drainage
  • Potential water damage or flooding caused by a faulty pump or drive belt

Causes of needing to replace the pump and drive belt kit include normal wear and tear over extended use, exposure to debris or foreign objects, or physical damage from impact or mishandling.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models. 

This part fixes the following symptoms
  • Spins slowly
  • Burning smell
  • Pumps but will not spin
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Maytag clothes washer would not spin or drain   Ben M. • Wallingford , CT • September 29, 2018

The washer was on, and I heard a faint humming sound in the laundry room. I went in and opened the washer and it was full of soapy water in the middle of its cycle and was not agitating. I also smelled a faint burning smell. At this point I figured the problem was a bad motor, as the washer is more than 20 years old. I have fixed it twice before, because the first time, the repairman said I should keep this washer going as long as possible. It was made to last with a metal drum, unlike newer... Read more

More
$32.43
Compare At:
$44.49
You Save:
$12.06

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Maytag Heating Element Connecting Wire
Genuine Whirlpool part
By: Whirlpool
Part Number: 279457

The Heating Element Connecting Wire is an OEM part for Whirlpool dryers, designed to provide a secure electrical connection to the dryer's heating element. This critical component ensures that the heating element receives the power it needs to generate heat for drying clothes. 

Causes of a bad heating element connecting wire can include overheating, physical damage, or wear and tear over time. These issues can lead to a loss of connectivity, resulting in the heating element failing to heat up. 

Symptoms of a bad Heating Element Connecting Wire include:

  • The dryer not heating up despite having power
  • Intermittent heating, suggesting a loose or faulty connection
  • Unusual smells or signs of burning, indicating overheating or damage to the wire

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Electric dryer ceased to produce heat   Glenn M. • South Windsor , CT • September 23, 2016

Our 25-year-old Whirlpool dryer abruptly stopped producing heat, though it was otherwise running normally. The unit had never required service of any type and we were reluctant to replace it. After confirming that no circuit breakers had tripped, I reviewed the Whirlpool and AppliancePartsPro websites and concluded that the most likely causes of the problem were a failed heating element and/or thermal fuse. I ordered both (they arrived in two business days), installed them and the dryer... Read more

More
$9.95
Compare At:
$11.94
You Save:
$1.99

IN STOCK
Ships Today Guaranteed
Add to Cart

Looking for Maytag washer dryer combo replacement parts? You've come to the right place! Keeping your Maytag washer dryer combo in top shape is essential for maintaining the convenience of handling all your laundry needs in one go. These units are a marvel of efficiency, and the parts designed for them play a crucial role in ensuring their seamless operation.

Maytag washer dryer combo parts, whether it's a drum belt, motor, or control board, are vital in keeping your appliance running smoothly. Each part works together to provide the convenience and reliability Maytag is known for. When it comes to replacing parts, opting for OEM (Original Equipment Manufacturer) replacement parts is always a smart choice. These parts are designed specifically for your Maytag model, ensuring quality and compatibility that generic parts often can't match.

Ensuring that you have access to the correct Maytag washer dryer combo replacement parts is key to extending the life of your appliance and keeping your laundry routine hassle-free. No need to worry; quality parts are readily available to keep your appliance performing at its best.

More

Related Parts

Maytag Washer Dryer Combo Accessories Parts Maytag Washer Dryer Combo Agitator Parts Maytag Washer Dryer Combo Axle, Roller, Pulley Maytag Washer Dryer Combo Baffle Maytag Washer Dryer Combo Bearing Maytag Washer Dryer Combo Belt Maytag Washer Dryer Combo Blower Wheel Or Fan Blade Maytag Washer Dryer Combo Bracket & Flange Parts Maytag Washer Dryer Combo Brake & Clutch Maytag Washer Dryer Combo Bumper, Bushing, Grommet Parts Maytag Washer Dryer Combo Burner & Related Maytag Washer Dryer Combo Cable Or Retainer Parts Maytag Washer Dryer Combo Cap Or Cover Parts Maytag Washer Dryer Combo Chassis Or Cabinet Parts Maytag Washer Dryer Combo Clip Or Clamp Maytag Washer Dryer Combo Coupling Or Cam Maytag Washer Dryer Combo Dispenser Parts Maytag Washer Dryer Combo Divider Or Deflector Parts Maytag Washer Dryer Combo Door, Door Glass & Parts Parts Maytag Washer Dryer Combo Duct Parts Maytag Washer Dryer Combo Endcap Parts Maytag Washer Dryer Combo Fuse Or Sensor Maytag Washer Dryer Combo Gas Conv Kit Parts Maytag Washer Dryer Combo Gasket & Seal Parts Maytag Washer Dryer Combo Gear & Related Parts Maytag Washer Dryer Combo Gearcase Parts Maytag Washer Dryer Combo Guard, Shield, Barrier Parts Maytag Washer Dryer Combo Heating Element Parts Maytag Washer Dryer Combo Hinge Parts Maytag Washer Dryer Combo Hose Or Tube Maytag Washer Dryer Combo Igniter Maytag Washer Dryer Combo Insulation, Sound Dampening Parts Maytag Washer Dryer Combo Knob, Dial & Button Maytag Washer Dryer Combo Latch, Catch, Lock Maytag Washer Dryer Combo Leg Or Foot Parts Maytag Washer Dryer Combo Lubricant Parts Maytag Washer Dryer Combo Motor Maytag Washer Dryer Combo Paint Parts Maytag Washer Dryer Combo Panel Parts Maytag Washer Dryer Combo Plug Or Insert Parts Maytag Washer Dryer Combo Screws, Nuts, Washers Maytag Washer Dryer Combo Siphon & Vacuum Break Parts Maytag Washer Dryer Combo Spring Maytag Washer Dryer Combo Support Parts Maytag Washer Dryer Combo Switch Maytag Washer Dryer Combo Terminal Block, Receptacle Parts Maytag Washer Dryer Combo Tub Or Basket Parts Maytag Washer Dryer Combo Tub Ring Or Cover, Counterweight Parts Maytag Washer Dryer Combo Valve Maytag Washer Dryer Combo Wire, Harness, Power Cord Parts
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store