Parts for Maytag MGR5755QDB: 05 - Gas Controls Parts

This is a gas surface burner valve that controls the flow of gas to a cooktop burner. It connects to the burner control knob and regulates flame size from high to low settings. Replace this valve if a burner won't light, has an uneven flame, won't turn off, or if you detect a gas smell when the knob is in the off position.

This is a replacement thermostat mounting screw that secures the temperature control sensor for reliable positioning and consistent temperature sensing. A simple, low-cost fix when the existing screw is missing, stripped, or damaged. What it does:

• Secures the thermostat or temperature sensor to the appliance housing or bracket
• Keeps the thermostat sensor in correct contact/position for accurate temperature readings
• Prevents the sensor from shifting, which can cause temperature fluctuations or inconsistent operation
• Replaces stripped, corroded, or missing mounting hardware

• Disconnect power to the appliance before starting any repair to avoid electric shock
• Use the correct screwdriver and match thread engagement; do not force or cross-thread the screw
• Tighten snugly but avoid overtightening to prevent damage to the thermostat or housing
• After installation, restore power and verify proper temperature control and operation

Burner head for gas ranges and cooktops. Distributes gas evenly to create a proper flame. Replace if cracked, damaged, or clogged with buildup.

Burner cap covers the gas burner head to distribute flame evenly. Replace if chipped, cracked, or causing uneven heating. Verify fit by model number.

Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.

Burner won't spark or light? This range top burner igniter creates the spark to ignite gas burners. Easy 15-minute DIY fix for cracked igniters.

This wiring harness connects a control or door switch to the appliance's main wiring, restoring proper electrical connection so the switch can send signals to the control. Fits as a direct replacement when the original harness is damaged or wiring is loose. What it does:

• Provides the electrical connection between a switch and the appliance wiring harness
• Restores switch operation when wires are frayed, broken, or connectors are damaged
• Helps prevent intermittent operation caused by loose or corroded terminals
• Matches OEM connector types and wire routing for correct fit and function

• One replacement switch wiring harness

• Intended for users comfortable with basic appliance repair; disconnect power (unplug or shut off breaker) before starting
• Verify connector orientation and secure all terminals; avoid pinching wires during reassembly
• If wiring insulation is damaged beyond the harness area, replace or repair wiring before use

Gas supply tube kit for ranges. Replace if you notice gas leaks, damaged tubing, or during range installation. Verify fit with your model number.

Fix continuous clicking or burners that won't light with this range spark module. Controls ignition sparks to all burner electrodes. Moderate DIY repair.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.

Oven won't heat or takes too long to preheat? A weak or failed igniter is the most common cause. Easy DIY repair, typically completed in under 15 minutes.

Fastening screw for securing components inside appliances. Replaces lost, stripped, or damaged screws during repairs or part installations.

If your oven won't heat or igniter glows but gas won't light, the igniter is likely weak. This is a common DIY repair taking 15-30 minutes.

Connects the gas supply line to your range's broil burner. Replace this fitting if it's cracked, corroded, stripped, or causing gas connection issues.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

Broil burner tube routes gas to your range's broil element. Replace if tube is rusted, cracked, or damaged to restore proper gas flow and broiling function.

Hand-tighten wing nut secures panels, brackets, and components in ranges and ovens for tool-free adjustment. Replace when lost, stripped, or broken.