Parts for Mtd 170-CU: Cu Air Filter Parts

The air cleaner housing on an engine is where the air filter is located. The housing is used to provide the air filter with added protection and to ensure that it doesn't become prematurely dirty or damaged. If the housing is not working properly, it could reduce the life expectancy of the air filter, which would then reduce the efficiency of the engine.Air cleaner housing is made from durable material and should last for a long time without worry. However, there is a chance that parts of the housing could break off over time, or that it could become cracked. Owners will want to replace damaged housing as soon as possible. They can check the quality of the housing whenever they are changing out the air filter.The housing is compatible with many small engines from Cub Cadet, MTD, Yard Machines, and Troy-Bilt. The part is sold individually and is a genuine OEM replacement part sourced from the manufacturer.

This is a replacement nut for use with bolts found on many types of lawn and garden machines. The purpose of the nut is to help fasten various parts together along with the bolt. The nut is a fastener with a threaded hole. The threads on the bolt connect with the threaded hole and provide a secure connection. A nut could need to be replaced if the threads have become stripped and it no longer fastens properly with the bolt. It would also need to be replaced if it has become lost. Replacing the nuts tends to be a fast and easy job. However, it will often depend on the location of the nuts in the machine. This is a genuine OEM replacement nut that is sold individually. Owners may want to buy several at once to have them available. The nut can be used on lawn mowers, snowblowers, tillers, log splitters, wood chippers, leaf blowers, and other small engines. Compatible brands include Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut.

This self-tapping bolt is an OEM replacement part that is sourced directly from the manufacturer. This self-tapping bolt is used to secure the silencer plate to the carburetor. The bolt taps its own hole as it is screwed into place. Using these bolts prevents the holes from being over-drilled or warped due to heat during shipment. The hole is the perfect size due to being tapped by the fastener.Self-tapping bolts create a tight fit and are a good choice for securing multiple layers of material. The holes do not have to be aligned before installation. The bolt makes the hole it needs through each layer. This makes it easier to disassemble and reassemble if necessary. Over time, exposure to the elements may cause the bolt to rust or corrode. If this happens, remove the damaged bolt and install a new one. This self-tapping bolt is made of heavy-duty metal and is sold individually. It is compatible with chippers, shredders, tillers, and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This carbon canister is a device used to control the amount of gas pollution that is released from small engines found in various lawn and garden machines. This is a genuine OEM replacement part that is sourced from the manufacturer. It is an emission control device also known as a charcoal canister. As gas evaporates from the fuel tank, the carbon canister catches the fumes and releases them into the engine so that they are not dispersed into the atmosphere. Age and regular use may cause the canister to crack or break and not hold the fumes inside. Typical signs that the canister needs replaced include strong fuel odors or leaking from the canister. If the canister is flooded by fuel, the canister will not operate properly. Fuel will spill out, and the canister will need to be replaced. Before replacing the carbon canister, empty the fuel from the machine and remove the spark plug wire for added safety. This repair should be made in a well-ventilated area.The carbon canister is made from heavy-duty plastic and is sold as an individual unit. It is compatible with tillers, chippers, and other small engines manufactured by MTD, Cub Cadet, Yard Machines, and Troy-Bilt.

This silencer plate is used on a variety of outdoor lawn and garden machines to reduce the noise from the air intake. This molded plastic part sits on top of the carburetor and houses the air filter. It provides an added layer of noise muffling. Exposure to wind, rain, and heat can cause the plastic to become brittle and cracked. The silence plate should be replaced if damage is discovered during routine maintenance. A screwdriver is needed to replace the silence plate. Before working on the machine, make sure the engine is cool and remove the spark plug. Remove the air filter cover and the air filter to access the silencer plate. Remove the screws holding the plate in place. Install the new silencer plate. Tighten the screws. Install the air filter and housing cover. This silencer plate is made of durable molded plastic and is sold individually. It is a genuine OEM replacement part sourced directly from the manufacturer. This part is compatible with tillers, chippers, shredders, and small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

This is a genuine OEM clamp sourced directly from the manufacturer. It is used in various lawn and garden machines to connect hoses to fittings. It is used to connect piping to water pumps, exhaust pipes to exhaust manifolds, and other similar applications. This connection prevents fluids or air from leaking from the hose. Clamps may be spring or screw/band clamps. Spring clamps require no tools to install and remove; however, the size must be more accurate than when using screw/band clamps. Screw/band clamps are adjustable and can be tightened or loosened. Screw clamps should be inspected periodically to ensure tightness and that the clamps have not rusted.Hose clamps are installed approximately 1/4 inch below the end of the hose. If two clamps are used, there should be 1/4 inch between the two bands. When using a screw clamp, loosen the screw with a screwdriver just enough to fit the clamp over the hose. If using a spring clamp, squeeze the clamp and hold it open. Slide the clamp over the hose and then attach the hose and clamp to the fitting. Slide the clamp into place at the joint and tighten. Do not overtighten. This brass-colored clamp is a spring clamp made of metal; it is sold as an individual unit. This clamp is compatible with many different types of pipes made by various manufacturers.

This exhaust piping is a genuine OEM replacement part sourced directly from the manufacturer; it is used on tiller engines and other small engines. The exhaust piping is part of the muffler system. It connects to the exhaust manifold. As gas is combusted to run the engine, it is forced out through the exhaust manifold and the exhaust piping. This process heats the pipes for a short period. Over a period of time, this repeated heating can cause the exhaust piping to deteriorate. If this happens, the piping will need to be replaced in order for the exhaust manifold to function correctly. If the engine is experiencing overheating problems, the exhaust pipes will need to be replaced when it is fixed. Overheating will cause them to deteriorate much faster than normal.Allow the engine and exhaust manifold to cool before replacing the exhaust piping. Remove the exhaust pipes from the exhaust manifold. Inspect the manifold for visible signs of damage while the pipes are off. This would be a good time to replace the exhaust manifold gasket. Install the new pipes. The exhaust piping is made of durable black plastic and sold as an individual unit. It is compatible with tillers, chipper shredders, snowblowers, and other small engines manufactured by Cub Cadet, MTD, Troy-Bilt, and Yard Machines.