Admiral Washer Valve

Best Seller

Genuine Whirlpool part

Admiral Water Inlet Valve Assembly

4.9 (224)

By: Whirlpool

Part Number: WPW10144820

Water inlet valve assembly includes: Hot and cold inlet valves, thermistor, vacuum break and wiring harness.

The Water Inlet Valve Assembly is an OEM part for Whirlpool washing machines, designed to control the flow of hot and cold water into the washer. This component ensures that water enters the washing machine at the correct times during the wash cycle, filling the tub to the appropriate levels for efficient cleaning.

Causes for a Water Inlet Valve Assembly to fail include sediment buildup from hard water, which can block the valves, wear and tear on the solenoids over time, and electrical failures that prevent the valves from opening or closing properly.

Symptoms of a bad Water Inlet Valve Assembly include:

The washing machine does not fill with water, or it fills very slowly.
Water continues to drip into the tub even when the washer is off
The washer fills with the wrong temperature of water

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Will not stop filling with water
No hot or cold water
Will not fill with water

Do-It-Yourself Stories from Customers like You Cold water wasn't coming into machine and cycle stalled when it reached "rinse " Barbara J. • Ronan , MT • July 23, 2018

Replacing the water inlet valve fixed the problem. For many months we noticed cold water was just dribbling into the washer during the rinse cycle, and "warm" washes were hot not warm. It seemed like the cold water wasn't able to enter the machine. Then one day the cycle just stopped when it reached "rinse" and wouldn't go any further. I first tried solving it by cleaning the filter where the cold water hose enters the machine at the back. It was coated in sediment (the water comes from a... Read more

$57.95

Compare At:: $69.49
You Save:: $11.54

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Water Inlet Valve

5.0 (77)

By: Whirlpool

Part Number: WPW10683603

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer, allowing it to fill with the correct amount of water during the wash and rinse cycles.

Over time, the water inlet valve can become clogged with debris, develop electrical issues, or wear out, leading to problems with the water flow. Causes of a bad water inlet valve include mineral buildup from hard water, internal component failure, or damage to the valve body.

Symptoms of a bad water inlet valve include:

The washing machine not filling with water
Slow or insufficient water flow into the washer
The washer filling with water when it should not
Unusual noises during the filling process
Leaks around the valve area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The cold water side of the water valve on the washer was leaking into the tub after the machine had shut down Carlos P. • Okeechobee , FL • November 17, 2014

Ordered the valve body from Appliance Parts Pro. It was very easy to find the part on their website. Ordering was simple. The part actually got here the next day. I received an email about 2 hours after I received the part that contained the tracking number. That is what is known as quick and reliable service. Part was a little hard to replace since I have big hands. There are 2 metal screws that hold the valve body to the washer that are in a small confined area. Unless you want to dismantle... Read more

$68.36

Compare At:: $81.35
You Save:: $12.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Water Inlet Valve

4.9 (18)

By: Whirlpool

Part Number: W11038689

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part ensures that the right amount of water enters the washing machine at the correct times, contributing to optimal washing conditions and efficient use of water.

A failing Water Inlet Valve can be caused by mineral deposits from hard water, which can clog or restrict water flow, or by electrical failures that prevent the solenoids from operating correctly.

Symptoms of a bad Water Inlet Valve include:

The washing machine not filling with water
Water filling too slowly or continuously
Water leaking inside the washer
Unusual noises during the fill cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking inlet valve. Dale S. • Hominy , OK • January 06, 2023

Installed new Water Inlet Valve. Read more

$58.21

Compare At:: $69.27
You Save:: $11.06

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Water Inlet Valve

5.0 (6)

By: Whirlpool

Part Number: W11210463

The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washing machine during the wash and rinse cycles. This valve ensures that the correct amount of water is delivered to the tub, enabling optimal washing performance and efficiency.

You should replace the water inlet valve if it becomes faulty or damaged. Common causes of a bad water inlet valve can include mineral deposits or debris clogging the valve, wear and tear from regular use, or electrical issues affecting the valve's operation. A malfunctioning valve can lead to improper water levels and poor washing results.

Symptoms of a bad water inlet valve include:

Washing machine not filling with water
Washer filling slowly or with low water pressure
Leaks around the valve area
Washer not advancing to the wash or rinse cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You No cold water, down to a trickle no code screens clean good pressure from hose faulty valve Terry P. • Freedom , PA • October 26, 2020

Replaced water inlet valve took all of 10 minutes and washer is filling great on hot and cold. Thanks to Appliance Parts Pros for getting me the part within 24 hours. I have a very happy customer. Read more

$89.95

Compare At:: $107.04
You Save:: $17.09

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Water Inlet Valve

5.0 (70)

By: Whirlpool

Part Number: WP22001274

The Water Inlet Valve is an OEM part for Whirlpool appliances. It controls the flow of water into the washing machine.

Causes of a faulty water valve can include wear and tear over time, sediment or mineral buildup, electrical component failure, or physical damage. These factors can result in issues such as inadequate water flow, water leakage, or the appliance not filling with water.

Symptoms of a bad water valve may include:

Insufficient water filling in the appliance
Slow or no water flow
Water leakage from the valve area

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

No hot or cold water
Will not fill with water
Will not stop filling with water

Do-It-Yourself Stories from Customers like You Water dripping in tub thru fill spout while not in use H Gene P. • Muskogee , OK • June 24, 2019

Replaced the water valve. Easy repair. The repair video was spot-on. Tools needed: Slip joint pliers for removing and attaching the hoses and moving the hose clip. 5/16 nut driver. Phone to take a picture so I could get the wires put back right. Shut off the water and unplug from power. Remove the hoses. Using a 5/16 nut driver remove the single screw that holds the bracket, lift bracket slightly and pull from the washer. There is a little slack in wires and fill hose to work with. Take a... Read more

$115.21

Compare At:: $135.95
You Save:: $20.74

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Water Inlet Valve

5.0 (26)

By: Whirlpool

Part Number: WP22002360

The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer during the filling cycles, ensuring the proper amount of water is used for washing and rinsing clothes. This valve plays a critical role in the overall performance and efficiency of the washing machine.

Causes of a bad water inlet valve can include mineral deposits or debris clogging the valve, electrical failure, or wear and tear from regular use.

Symptoms of a bad water inlet valve include:

Washer not filling with water
Slow filling or no water flow
Leaking water from the valve area
Washer not advancing through cycles properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

No hot or cold water
Will not fill with water
Will not stop filling with water

Do-It-Yourself Stories from Customers like You Water wouldn't shut off tub kept filling William M. • Stroudsburg , PA • April 24, 2016

Ordered a new inlet water valve . Super fast delivery ordered on a Wednesday afternoon was here Thursday morning , standard shipping , I was impressed !! Removed the old valve , installed the new , checked for leaks no issues , washer is back on line and my Honey is very happy with me . Read more

$109.70

Compare At:: $131.64
You Save:: $21.94

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Water Inlet Valve Assembly

5.0 (42)

By: Whirlpool

Part Number: WP21001932

The Water Inlet Valve Assembly is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer during the fill cycles, ensuring the right amount of water is used for washing and rinsing. It plays a crucial role in the overall efficiency and functionality of the washing machine.

Common causes of a bad water inlet valve include sediment buildup, electrical failures, or damage to the valve components.

Symptoms of a bad water inlet valve assembly include:

The washer not filling with water or filling slowly
Water leaking from the valve area
The washer filling with water even when it's turned off
Error codes related to water intake issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms

Will not fill with water
No hot or cold water
Will not stop filling with water

Do-It-Yourself Stories from Customers like You Water overflow from washer Arthur T. • Marshall , NC • June 09, 2014

I called Appliance pros and asked for a diagnosis. They gave one and sent me the part. It took 15 min. and it worked perfectly. Also got super fast delivery on the part. Thank you!! Read more

$103.95

Compare At:: $122.66
You Save:: $18.71

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Admiral Water Injector

5.0 (18)

By: Whirlpool

Part Number: WP22001304

The Water Injector is an OEM part for Whirlpool washing machines. This component is responsible for distributing water into the washing machine during the wash cycle, ensuring that clothes are thoroughly saturated and cleaned. It connects to the water supply and directs water into the tub at the appropriate times.

Common causes of a bad water injector include blockages from mineral deposits, wear and tear from frequent use, or damage due to high water pressure. Over time, the injector's effectiveness can diminish, impacting the washing machine's performance.

Symptoms of a bad water injector include:

Insufficient water entering the washing machine
Longer fill times or failure to fill at all
Poor cleaning performance
Leaks or drips around the injector area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Water squirted out the back of the machine when i tried to fill the tub Walter W. • Saint Paul , MN • June 30, 2014

Removed the front panel and removed the screw from the console which revealed a broken plastic tab on the right side of the old injector. Replaced the old injector with the new one and that took care of the problem. Read more

$51.27

Compare At:: $61.52
You Save:: $10.25

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Admiral Water Inlet Valve Kit

4.6 (7)

By: Whirlpool

Part Number: 35-2374N

This water valve kit regulates the flow of hot and cold water into your appliance during fill. Replace a weak, leaking, or stuck valve to restore consistent fills and proper shutoff, resolving common no-fill, slow-fill, or seeping issues.

Controls incoming water to achieve correct fill levels and temperature mix
Addresses no fill, slow/partial fill, or water seeping into the tub when off
Replaces valves that are electrically failed or mechanically clogged/sticking

Includes: One water inlet valve kit Install notes:

Disconnect power and shut off both water supplies before servicing
Have towels ready; relieve hose pressure and note wire/hose locations (take a photo)
Transfer any mounting parts from the original valve if required; avoid overtightening plastic fittings
Restore water slowly, check for leaks, and run a test fill

This part fixes the following symptoms

No hot or cold water

Do-It-Yourself Stories from Customers like You Hot water solenoid on water valve not working James L. • Dagsboro , DE • June 17, 2014

Removed old water valve and replaced it with new one. Reconnected wiring and water lines. Everything is working fine now. Read more

$173.78

Compare At:: $206.10
You Save:: $32.32

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Admiral Water Inlet Valve

4.7 (10)

By: Whirlpool

Part Number: 12002158

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part controls the flow of water into the washer during the fill cycles. The valve opens to allow water to enter the tub and then closes once the desired water level is reached, ensuring the proper amount of water is used for washing. This valve includes the thermistor.

Causes of a bad water inlet valve can include mineral deposits and sediment buildup, electrical issues such as faulty solenoids, or wear and tear from frequent use.

Symptoms of a bad water inlet valve include:

The washer not filling with water
The washer filling slowly or not stopping filling
Leaks from the valve area
Inconsistent water levels during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Potential series changes might cause the valve to be part number WP22004333. Make sure to verify your model number for the correct part.

This part fixes the following symptoms

Will not fill with water
No hot or cold water

Do-It-Yourself Stories from Customers like You I was not getting any cold water in my washing machine. Kenneth D. • Blasdell , NY • July 06, 2023

1.) Made sure BOTH Hot & Cold Water Lines turned off to Maytag Washer. (I have dual shut-off valve for those two water lines), 2.) Briefly ran Washer on Warm Water Setting, removing water pressure & remaining water from Hot & Cold water lines. 3.) Unplugged Washing Machine. 4.) Used Needle Nose Pliers to remove BOTH Hot & Cold Water hoses from the hookup on the back of the washer. 3.) Made sure I had an empty bucket, on hand, to catch remaining water that may come out of now-removed, hot &... Read more

Admiral washer valve replacement parts play a crucial role in keeping your washing machine running smoothly. These valves are essential for controlling the flow of water in and out of your washing machine, ensuring your laundry gets clean without any hiccups. No one likes surprises when it comes to laundry day, and having these parts in tip-top shape is key to avoiding unwanted interruptions.

The Admiral washer is a powerhouse in the world of home appliances. To keep it performing flawlessly, you'll need reliable Admiral washer parts. These replacement valves are designed to fit perfectly, maintaining the integrity and efficiency of your appliance. OEM replacement parts are particularly noteworthy because they promise a perfect match in quality and compatibility, making them a wise choice for repairs or routine maintenance.

If you're looking to maintain the high performance of your laundry appliance, rest assured knowing that top-notch Admiral washer valve parts are readily available. Investing in these quality parts ensures your washer remains in peak condition, keeping your clothes clean and fresh with every wash.

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Admiral Washer Valve

Admiral Water Inlet Valve Assembly

Admiral Water Inlet Valve

Admiral Water Inlet Valve

Admiral Water Inlet Valve

Admiral Water Inlet Valve

Admiral Water Inlet Valve

Admiral Water Inlet Valve Assembly

Admiral Water Injector

Admiral Water Inlet Valve Kit

Admiral Water Inlet Valve

Common Problems