Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Admiral Washer Belt

Best Seller
Admiral Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10006384

The washer drive belt transfers motor power to the washer’s drive system so the basket spins and agitates. Replacing a stretched or broken belt helps stop squealing and slipping so cycles finish at proper spin speed.

What it does

  • Links the drive motor to the washer’s drive/pulley system
  • Restores spin and agitation when the belt is worn, glazed, or broken
  • Can reduce squeal or burning-rubber smells from belt slip
  • Helps prevent intermittent or no-spin conditions

What’s included
One drive belt.

Install notes

  • Unplug power; turn off water
  • Tip the washer back; remove the bottom shield/cover if present
  • Route the belt over the motor and drive pulleys; rotate by hand to seat fully
  • Inspect pulleys/drive parts for wear; run a spin or calibration test after install

This OEM Whirlpool belt is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

Do-It-Yourself Stories from Customers like You Whirlpool Cabrio washer made a loud noise during the spin cycles it also was very noisy while washing   Ralph N. • Spring , TX • October 25, 2018

This was my first attempt, ever, to repair a washing machine. After some internet research on the problems, I was able to determine that the shaft seal on the gearcase probably was leaking water into the gearcase with each use. No water was ever found on the floor, but when I turned the washer over to inspect the gearcase, I found a black, oily residue on the outside of it along with the same residue on the pulleys, the belt and the motor. I ordered a new gearcase, shift actuator, splutch... Read more

More
$28.26
Compare At:
$33.63
You Save:
$5.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Pump And Drive Belt Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12112425

The Pump and Drive Belt Kit is an OEM replacement part for Whirlpool washing machines. The Pump and drive belt kit is responsible for helping to drain water from the washer drum during the wash cycle. The pump and drive belt kit works by powering the washer's pump to remove water from the drum and out of the washer. The drive belt provides the power to turn the pump, while the pump helps to drain the water. The kit includes 1 pump belt and 1 drive belt.

This part fixes the following symptoms:

  • Standing water in the washer drum
  • Ineffective or non-existent water drainage
  • Potential water damage or flooding caused by a faulty pump or drive belt

Causes of needing to replace the pump and drive belt kit include normal wear and tear over extended use, exposure to debris or foreign objects, or physical damage from impact or mishandling.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models. 

This part fixes the following symptoms
  • Spins slowly
  • Burning smell
  • Pumps but will not spin
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Maytag clothes washer would not spin or drain   Ben M. • Wallingford , CT • September 29, 2018

The washer was on, and I heard a faint humming sound in the laundry room. I went in and opened the washer and it was full of soapy water in the middle of its cycle and was not agitating. I also smelled a faint burning smell. At this point I figured the problem was a bad motor, as the washer is more than 20 years old. I have fixed it twice before, because the first time, the repairman said I should keep this washer going as long as possible. It was made to last with a metal drum, unlike newer... Read more

More
$32.43
Compare At:
$44.49
You Save:
$12.06

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21352320

The Washer Drive Belt is an OEM part for Whirlpool washing machines. It is crucial for transmitting the power from the motor to the drum, enabling the washing machine to tumble and spin during the wash and spin cycles. The drive belt wraps around the motor and drum pulleys, providing the necessary traction and tension to operate efficiently.

Causes of a bad Washer Drive Belt can include stretching over time, which reduces its efficiency to grip the pulleys properly, or fraying and cracking due to age and normal wear and tear. Misalignment or improper installation can also lead to premature belt failure.

Symptoms of a bad Washer Drive Belt include:

  • The washing machine failing to spin or agitate.
  • A burning smell or unusual noises during operation, indicating slippage or rubbing.
  • Visible signs of wear like cracks, fraying, or noticeable looseness on the belt.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Burning smell
  • Will not agitate
  • Spins slowly
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You The drive belt on my maytag washing machine was worn out   Donnie B. • Campobelly , SC • July 23, 2014

I Purchased a new belt and replaced it. If I had not watched the video telling me how it is done the job would have been much more difficult. After watching the video I changed the belt in less than 2 minutes. I ordered the belt from Appliance Parts Pros and got it the next day. I am thankful that when I started my search I landed on your web site. Thanks for the quick service and the video. Read more

More
$15.95
Compare At:
$23.33
You Save:
$7.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Washer Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003483

The Washer Drive Belt is an OEM part for Whirlpool washers. This belt connects the washer's motor to the drum, enabling the drum to rotate during the wash and spin cycles. It plays a crucial role in the washer's operation.

Causes of a bad washer drive belt can include wear and tear, stretching, or damage from overloading the washer.

Symptoms of a bad washer drive belt may include:

  • Drum not spinning or agitating.
  • Unusual noises coming from the washer during operation.
  • Belt slipping or appearing worn.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Loud knocking and rattle while in spin cycle.   Daniel K. • Grafton , WI • July 30, 2017

18 year old Maytag Atlantis top load washer had a load knocking and rattle sound with excessive vibration when the tub was spinning, but not when it was agitating. They was no water leaking. I took the front panel off and carefully listened while I ran a cycle and the loud sound sounded like it was coming from the drain pump. So I took off the drive belt and noticed that it was glazed and that there was belt material on the drain pump and tub transmission pulleys. I removed the drain pump and... Read more

More
$32.95
Compare At:
$39.21
You Save:
$6.26

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Drive Belt
Genuine Whirlpool part
By: Whirlpool
Part Number: W11239857

The Drive Belt is an OEM part for Whirlpool washing machines. This belt works to spin the washing machine tub and agitate clothes during cycles. It transmits rotational power from the motor to the inner tub and outer tub.

Causes of a bad drive belt can include wear and over time usage, exposure to harsh detergents or fabric softeners that may cause premature wear and cracking, or damage from overloading the washer.

Symptoms of a bad drive belt include:

  • The washer tub not spinning or rotating very slowly
  • Loud squealing, squeaking or grinding noises when operating
  • The belt slipping off the pulleys
  • Vibrating that causes the washer to walk or move during cycles

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The metal om metal sound at the end of the spin cycle. Also found gearcase oil covering the inside of the drive belt plastic cover.   Harry S. • Belvidere , NJ • May 23, 2023

Replaced the Gearcase assembly which is a sealed unit that is not serviceable. Also replaced the clutch and belt because they were covered in gearcase oil. Read more

More
$44.95
Compare At:
$53.04
You Save:
$8.09

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Admiral Belt And Isolator Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001788

The Belt and Isolator Kit is an OEM part for Whirlpool washing machines. This kit includes a drive belt and isolators that work together to transfer motion from the motor to the washer drum while dampening vibrations. 

Over time, the belt can wear out, stretch, or break due to regular use, heavy loads, or friction. The isolators may also deteriorate, losing their ability to absorb shocks effectively.

Symptoms of a bad Belt and Isolator Kit include:

  • The drum not spinning or agitating
  • Excessive vibration or noise during operation
  • The washer failing to start or complete cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Will not agitate
  • Spins slowly
  • Burning smell
  • Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You Noisy spin cycle   Gregory E. • Halifax , PA • April 17, 2017

I just wanted to put my experience here for all to see. I have a Maytag Neptune, MAH5500BWW, one of the original ones. I bought it back in 2002 and it has done many many loads of wash faithfully. So when the bearings started to get loud I thought it best to replace them, the seal kit and the belt. I did my research as best I could and decided to order the OEM parts from an appliance supplier. If you are replacing the bearings, watch on line videos prior to performing the job. It will... Read more

More
$28.95
Compare At:
$34.45
You Save:
$5.50

IN STOCK
Ships Today Guaranteed
Add to Cart

Admiral washer belt replacement parts are essential in keeping your Admiral washer running smoothly. Imagine the convenience of knowing your laundry will be efficiently cleaned without any interruptions. That's where Admiral washer belts come into play. These belts are vital in ensuring the drum of your washer rotates correctly, delivering the reliable performance you expect.

Admiral washer parts, particularly the belts, work tirelessly behind the scenes. These components help transfer the motor's energy to the drum, making sure that your clothes are thoroughly cleaned and rinsed. Ensuring you have a high-quality Admiral washer belt means less time worrying about unnecessary breakdowns and more time enjoying the benefits of clean laundry.

Choosing OEM replacement parts can make a big difference, as they're designed specifically for your Admiral washer model. This means you get the best fit and performance, maintaining the high standards that Admiral appliances are known for. Compatibility and quality are essential for the longevity and functionality of your washer.

You can easily find Admiral washer belt replacement parts to keep your appliance in top shape. They're durable, reliable, and essential for seamless laundry days. So, whether you're doing a small load or tackling a mountain of clothes, you know your Admiral washer won't let you down.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store