Parts for Briggs & Stratton 133432-1010-E2: Air Cleaner, Muffler Parts

This standard engine screw is responsible for securing various components and has multiple applications or locations, depending on the type and model of the lawn and garden equipment. It needs to be in good condition to continue to work effectively. Over time, however, hardware can come loose, be lost, break, or be otherwise worn or damaged, which would require a replacement. This screw can provide a solution for a number of applications on various engines. This genuine OEM replacement screw is manufactured to exact standards by Briggs & Stratton. It is compatible with hundreds of engines in lawn mowers and generators. Check the owner's manual for part location, as well as appropriate replacement procedure. This screw is made from durable metal and sold as an individual unit. Those who need more than one screw will have to order multiple quantities. This hardware should always be installed properly according to the manufacturer's recommendations and is a specialty screw that has specific uses. Not using the OEM screw replacement could cause operational issues or void any warranties that are in place.

This Briggs and Stratton OEM lawn mower air filter is designed to work with 3 and 5 horsepower industrial plus and 5.5 horsepower Vanguard engines. An air filter is the first line of defense against dirt and debris that can be kicked up from the mowing process. When in good condition and working properly, the air filter prevents dirt from entering the engine through the carburetor.Lawn mower air filters should be replaced every three months (or more often if necessary) to prevent damage to the engine. Changing the air filter is an easy process and is usually performed when changing the oil. Routine maintenance can increase the life of the lawn mower. Replacing the air filter requires a flat head screwdriver and takes only seconds.Remove the spark plug wire. Remove the retaining bolt from the lawn mower's air filter housing. Separate the housing halves and remove the air filter. Clear away debris from the housing to ensure the new filter will not collect any of the left over debris and install. This is an OEM part sourced directly from the manufacturer and sold individually.

This replacement grommet is bent at a 45-degree angle to create an elbow for the crankcase breather tube. Another name for the replacement grommet is a 45-degree breather tube. It is made from high-quality black rubber. If the exhaust smoke is coming out dark in color, the grommet may be cracked or damaged and need to be replaced. Another symptom of a faulty grommet is a reduction in mower performance. If the engine is backfiring, this could also be a sign that the grommet has failed. This simple repair doesn’t require any tools. It should easily fit into place without needing to remove any parts aside from the old grommet. Just attach the replacement grommet to the breather tube, connecting the crankcase to the carburetor. It is compatible with many mowers and other small engines manufactured by various brands like Briggs & Stratton, Cub Cadet, Simplicity, and Toro. This is a genuine OEM part.

This screw is designed to be used on all sorts of lawn and garden equipment. The metal screw is durable and attaches to the muff guard bracket to keep it in place and stable while the equipment is being used. This screw can become damaged through overuse or wear and tear. It can also break or become stripped, which will require it to be replaced.Visually inspecting the area with the muff guard bracket is connected to the rest of the equipment will give information about whether the screw is broken or damaged. The screws can also be cleaned to be more visible so small problems are easier to pick up on. Sometimes the screws can become loose, which is another situation where a replacement is needed. Simply use a screwdriver to take out the old screw and replace it with a new one.This screw is a genuine OEM replacement part that is directly sourced from the manufacturer. It comes as an individual part. The screw can be used on snowblowers, lawnmowers, lawn tractors, tillers, pressure washers, leaf blowers, edgers, generators, wood chippers, and log splitters made by MasterCut, Simplicity, MTD, Snapper, Lawn-Boy, Wheel Horse, Cub Cadet, Toro, Craftsman, and Briggs & Stratton.

This replacement exhaust gasket is an authentic OEM part for a snowblower or lawn tractor engine. On these appliances, the exhaust is located quite near to the air filter, meaning that there is a chance that exhaust could leak into the carburetor. The carburetor requires fresh air to oxygenate fuel for combustion, so manufacturers install a gasket to help seal off the exhaust. Once installed, gaskets exist under a lot of pressure and will absorb the heat of the engine. These stresses cause gaskets to slowly degrade and eventually break their seal. If the exhaust gasket blows, the engine will not perform as it should. Be cautious of a noisy engine that burns more fuel than usual and gives off a burning smell. These are signs that the exhaust gasket has given out. If so, use a socket wrench and wrench set to disassemble the blower and air filter housings, then remove the exhaust manifold and change out the broken gasket. This high-quality replacement exhaust gasket is compatible with engines made by Toro, Husqvarna, Briggs & Stratton, and Snapper. It comes sourced from the original manufacturer and ships individually.

This replacement pre-filter is an authentic OEM part for a wide range of small and medium sized gas-powered lawn appliances. Before gasoline passes into an engine's combustion chamber, it is first mixed with air in the carburetor to make a balanced and well-oxygenated fuel. The air comes in from outside of the engine. However, if the air is full of particulate matter, it can sully the fuel and cause the engine to degrade. To prevent this, manufacturers install an air filter to catch dust and debris. This is a pre-filter that adds a second layer of protection for the carburetor. After a few months of regular use, an air filter will usually have reached its maximum capacity. If left for too long, it can block air from entering the carburetor and cause the engine to choke up. Therefore, it's important to replace filters and pre-filters every two to three months. This is an easy fix, as most air filters will just pop open. If not, use a screwdriver to gain access. This replacement pre-filter is designed for Briggs & Stratton and Toro appliances. It comes from the original manufacturer and ships individually.

This replacement part is a screw. It is a genuine replacement part made by Midwest Engine. Screws are found in many different types of appliances and machines. These parts are important in holding different pieces together so that the user is able to operate the appliance effectively. A replacement screw might be needed if some parts of the appliances are loose or missing. Screws can become stripped over time. If this is the case it is recommended that they be replaced as soon as possible. The repair for this screw is simple and will most likely require a screwdriver and perhaps pliers if the previous part is lodged in place. This screw is made of durable metal. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This is a genuine OEM replacement part.