Parts for Briggs & Stratton 133432-1010-E2: Electric Starter, Rewind Group Parts

Fix a pull cord that won't retract or gets stuck with a complete recoil starter assembly. Includes housing, pulley, spring, rope and handle.

This is a starter rope that is used in the starter assembly of many sorts of lawn and garden equipment. It works with tools with small engines by engaging the starter pulley when the rope is pulled so the engine turns on. Through use, wear and tear can occur. This can cause the starter rope to fray or weaken. When the rope is already weak, it can break and the tool will no longer be able to be used.The most common sign that the starter rope is broken is receiving a handful of rope when pulling the rope to start the engine. If this occurs, the starter rope will need to be replaced. Before starting the replacement process, make sure the machine is turned off and the spark plug wire has been removed. Remove the starter rope from its guide to replace it with a new part.This starter rope is sold as an individual part. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The rope is made for use with lawnmowers, tillers, pressure washers, leaf blowers, and wood chippers manufactured by Simplicity, Lawn-Boy, Murray, Toro, Craftsman, and Briggs & Stratton.

Fix a broken or worn starter handle that won't pull easily. This starter rope grip restores easy pull-starting on lawn mower and outdoor power engines.

This is a replacement screw that can be used on various types of lawn and garden equipment. The type of equipment will affect where the screw is used on the tool. A screw is used to attach various components together so nothing comes loose while the tool is in use. It can also be used with a nut. It's best to choose a nut that has the same finish and threading as the screw.A screw can be damaged in many ways. If this occurs, it will need to be replaced. Corrosion, wear and tear, extreme stress, and high temperatures can all cause a screw to fail. Inspecting the screw can indicate whether it will need to be replaced. Use a screwdriver to take off the old screw, or use a pair of pliers if the screw has become stripped. Replace it with a new screw.This is an authentic OEM replacement part sourced directly from the manufacturer. Each screw is sold individually. The component is designed for use with lawn mowers, snowblowers, tillers, pressure washers, leaf blowers, edgers, chainsaws, generators, and wood chippers manufactured by Briggs & Stratton, Simplicity, Toro, MTD, Cub Cadet, Lawn-Boy, Homelite, and Murray.

Engine won't start? A worn pawl friction plate in the starter assembly prevents cranking. This small engine part transfers power to the starter cup.

Engine won't start or recoil pull cord spins freely? This ratchet pawl engages your recoil starter system. Comes as a set of two. Simple repair.

Replacement screw that secures the pawl friction plate in lawn and garden engines. Replaces lost, stripped, or damaged flange bolts on the recoil assembly.

Fix a pull cord that won't retract or gets stuck with a complete recoil starter assembly. Includes housing, pulley, spring, rope and handle.

This replacement friction spring is a genuine OEM part meant for any number of small appliance engines run using a starter rope. This spring absorbs large amounts of kinetic energy that could damage the starter rope pulley system. It helps keep the pulley from being overstretched, which would create enough pressure to break the entire system. This spring sits at the center of the pulley system and creates resistance as the user yanks the starter rope. Friction springs can become worn out after repeated use, especially if a user tends to yank the starter rope quite forcefully. The most obvious sign of a worn of friction spring is if the pulley system lacks any resistance. As the user pulls the cord, they should feel a little pull back, but if the friction spring is worn, there will be much less resistance. Replacing this part is straightforward and will only require a screwdriver. Simply open the pulley system, carefully remove the old spring, and install the new one. This part is compatible with a wide number of appliances from Toro, Vanguard, Briggs & Stratton, and Lawnboy. It comes sourced from the original manufacturer and ships individually.

This brush retainer is part of the starter motor on many types of lawn and garden machinery. It comes with both the retainer and a set of four brushes. The main job of the brush retainer is to hold a set of carbon brushes against the commutator bars located on the armature. If the brush retainer is worn, damaged, or improperly seated, it can cause problems with the equipment. The starter motor will not be able to get the proper amount of current from the battery.If the brush retainer might be causing problems, a visual inspection can be performed. A damaged brush retainer can wear down to the wire lead and become burned, pitted, or cracked. When the brush retainer is worn out, it can decrease engine performance, reduce braking, and cause the motor to lose power. This brush retainer is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. The retainer is made to be used with lawnmowers, snowblowers, tillers, and wood chippers created by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Lawn-Boy, Snapper, MTD, and Simplicity.

Pull cord won't retract or rewind on your engine? This recoil pulley and spring assembly restores proper starter function. DIY-friendly repair.

Pull cord won't retract or rewind on your engine? This recoil pulley and spring assembly restores proper starter function. DIY-friendly repair.