Parts for Electrolux E36GF76JPS2: 07 - Body Parts

This front control panel houses and protects the oven/range console, providing the surface and mounting for the touchpads, buttons, and display. Replaces a cracked, faded, or damaged control surface to restore appliance appearance and button access. What it does:

• Provides the finished front surface for the console and the mounting area for controls and display
• Protects underlying electronics from spills, grease, and light impact
• Restores access to buttons/touchpads that stick, crack, or no longer register properly
• Helps improve the appliance's cosmetic appearance when the original panel is dented or discolored

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Remove adjacent trim or bezels as needed; handle the panel carefully to avoid scratching the finish
• Keep screws and small fasteners organized; some connectors or overlays may need to be transferred from the old panel

Mounting screw for gas ranges. Secures internal components and panels. Replace if screw is stripped, missing, or damaged during appliance service.

Broiler pan rack for electric ovens and ranges. Replaces cracked, warped, or missing racks. Installs inside broiler pan for elevated cooking.

This control panel is the outer console that houses the oven/range user interface and protects internal controls. It restores the appliance's front appearance and provides a stable mounting surface for buttons, displays, and switches. What it does

• Replaces a cracked, faded, or warped front console to restore the appliance's appearance
• Provides the mounting surface and openings for the control keypad, display, and selector switches
• Helps protect internal electronic components from spills and debris
• Can stop erratic input caused by damaged or loose panel areas around buttons

• One control panel (outer/console) as shown

• Installation requires removing the range/oven console trim and disconnecting power before starting
• Handle with care to avoid scratching the finish; align mounting tabs and secure with factory screws
• Ensure connectors are reattached correctly before restoring power

Broiler pan for electric and gas ranges. Installs in oven cavity for broiling. Replace if cracked, warped, rusted, or heavily stained beyond cleaning.

This broiler insert is the oven pan insert that sits under the broiler burner to catch drips and help direct heat for even browning. It restores a stable cooking surface and keeps the broiler area cleaner. What it does:

• Holds food and catches grease and drips during broiling to prevent mess and flare-ups
• Directs heat from the broiler for consistent browning and searing
• Replaces damaged, warped, or corroded inserts that cause uneven cooking
• Helps prevent food from falling into the burner area

• One broiler insert

• Disconnect power to the appliance and allow the oven to cool completely before servicing
• Remove oven racks and slide the old insert out; position the new insert so it seats securely in the broiler cavity
• Wear heat-resistant gloves when testing the broiler after installation and inspect for proper fit before use
• Do not modify the part; use only as designed for the oven broiler assembly

Drawer glide and support assembly for ranges. Installs on warming or storage drawer to provide smooth sliding operation. Replace if worn, broken, or damaged.

This control-panel switch restores reliable on/off control of a selected function on your range or wall oven. Replacing a worn or intermittent switch helps ensure the appliance responds consistently when you toggle that function.

• Directs power to the associated circuit when switched on or off
• Common symptoms: function won't turn on/off, intermittent operation, or the switch feels loose/sticks
• Helps restore positive, consistent control from the backguard/control panel

• Disconnect power at the breaker before servicing
• Access the switch from the control panel/backguard; retain screws/clips
• Label/photograph wire positions and transfer leads one at a time to the new switch
• Ensure firm terminal connections, reassemble, restore power, and test operation

Mounting bracket secures range components to the cabinet or frame. Replace if bracket is bent, cracked, or broken to restore proper alignment and support.

Fix an oven door that won't lock during self-clean or clean cycle errors. This door latch assembly secures the door and reports lock status to the control.

Replace your range oven door seal to maintain heat efficiency and prevent energy loss. Essential when you notice gaps, cracks, or heat escaping. Verify fit.

Replace a cracked, broken, or missing oven door spacer that maintains proper alignment and gap between door components. Installs in door assembly.

This refrigerator door gasket creates a tight seal around the door edge to help maintain proper temperature and energy efficiency. It replaces a worn or torn seal to reduce warm air leaks and improve cooling performance. What it does:

• Seals the refrigerator door to keep cold air in and warm air out
• Helps prevent frost buildup and uneven temperatures inside the compartment
• Reduces compressor run-time caused by air leaks
• Common symptom: warped, cracked, or compressed gasket that no longer seals

• One refrigerator door gasket

• Inspect door edge and mounting channel; clean before installing the new gasket
• Gasket may need to be warmed or eased into the channel for a snug fit
• If the door is misaligned or hinge issues exist, address them before gasket replacement
• Turn off power to the appliance or disconnect before doing any repairs; wear work gloves to avoid sharp edges

Oven won't reach or hold set temperature? A faulty temperature sensor causes inaccurate heating. This monitor probe ensures consistent cooking results.

This refrigerator cabinet insulation reduces energy loss and helps maintain even temperatures for reliable food preservation. It fits behind the liner to improve cooling efficiency and reduce frost buildup when installed correctly. What it does:

• Provides thermal barrier between cabinet shell and interior liner to help maintain set temperatures
• Helps prevent condensation and reduces frost formation on evaporator and interior surfaces
• Restores proper insulation when damaged, torn, or missing, improving compressor runtime and temperature stability
• Works with factory mounting locations and shapes to seal gaps around the cabinet

• Turn off power to the appliance and unplug before beginning any repair.
• Remove interior liners or panels as required to access factory insulation.
• Replace only the damaged insulation; avoid compressing or bunching material during installation.
• Use proper protective gloves and a dust mask when handling older insulation to avoid irritation.

Spacer for ranges and ovens. Maintains proper spacing between components. Replace if worn, cracked, or missing to ensure correct alignment and fit.

This inner cabinet liner replaces a cracked, stained or warped freezer interior to restore a clean, smooth surface and help contain spills. It provides the molded interior surface that holds shelves and drawers in place. What it does:

• Restores the freezer's interior skin that supports shelves, bins, and seals
• Stops drafts and moisture from getting behind the liner when warped or damaged
• Prevents food contact with cracked or stained surfaces that can harbor odors
• Helps maintain proper airflow paths inside the freezer cabinet

• Disconnect power and empty the freezer before starting work
• Removal and installation may require removing trim pieces, shelves, and fasteners; keep track of mounting hardware
• Handle carefully to avoid cracking the replacement liner during install

Fix F95 error code or oven door that won't lock during self-clean cycle. This door lock motor assembly repair takes about 15 minutes with basic tools.

Range won't start or respond to controls? This electronic control board restores operation by managing timing and power to key components for proper cycles.

Replace a cracked, broken, or missing access panel cover on your range or oven. Secures internal components, restores finished appearance, and shields wiring.

Fix a range cooling fan that won't shut off or makes howling noises with this motor. Requires removing oven from cabinet and back panel access.

Loud grinding or rattling from your oven? A damaged convection fan blade disrupts airflow. This replacement restores quiet operation in 20-30 minutes.

This is a nut that is used in many microwave ovens. It is typically used to hold interior fan in place. A nut is a fastener that is used to hold two items together or keep one component secure against a surface. Use and time can cause the nut to become stripped, damaged, or broken. If the nut is broken, it will no longer hold the fan in the right location. The nut will need to be replaced.Before replacing this part, the microwave should be unplugged. Open the refrigerator door and remove the cover that goes over the fan. The nut can then be removed using a nut driver. Replace the other parts before using the appliance.This nut is used in microwave ovens manufactured by Crosley, Electrolux, Frigidaire, and Kenmore. It is sold as a single part. This is an authentic OEM replacement part is sourced directly from the manufacturer.

Fix noisy convection fan operation with this motor replacement. Restores quiet, even heating in your oven. Moderate DIY repair in 30-60 minutes.

Bake element restores oven heat by producing the radiant heat needed for baking and roasting. Replacing a worn or damaged bake element helps the oven reach and maintain set temperatures for more consistent cooking results. What it does:

• Heats the oven cavity to provide direct radiant heat for baking and roasting.
• Use when the element shows visible breaks, blistering, or does not glow when the oven is set to high.
• Common symptom indicators: oven won't reach set temperature, uneven baking, or longer-than-normal cook times.
• Works as a direct replacement for the oven's lower/bake heating element.

• Disconnect power at the breaker or unplug the appliance before starting any repair.
• Allow the oven to cool completely and wear gloves to avoid sharp edges.
• Match the part to your model and terminal layout before installing; tighten connections securely.

Replace your worn or missing range spacer to restore proper component alignment and spacing. This small plastic part maintains correct clearances inside the unit.

This wiring harness is the appliance's factory-style wire assembly that connects electrical components for reliable power and signal routing. Replacing a damaged harness restores proper connections and helps eliminate intermittent or no-power issues. What it does:

• Links controls, motors, and sensors so components receive power and signals
• Restores lost or intermittent electrical connections that cause failures
• Helps prevent shorts or open circuits from frayed or broken wires
• Supports safe operation by keeping wiring organized and secure

• One wiring harness assembly as shown

• Disconnect power to the appliance before inspecting or replacing the harness
• Handle connectors gently and seat each plug fully until it clicks
• Route the harness following the appliance's wire channels and retainers to avoid pinching

This replacement insulation panel fits inside the appliance cabinet to help reduce heat transfer and dampen noise for more consistent temperatures. It restores thermal barrier performance and helps the unit run as designed. What it does:

• Provides thermal insulation between cabinet walls and internal components
• Helps reduce condensation and frost buildup when properly installed
• Dampens vibration and operating noise from the compressor and fans
• Can improve temperature stability by restoring the original thermal barrier

• One insulation panel as shown

• Disconnect power (and water if applicable) before starting any repair
• Access may require removal of panels, shelving, or trim pieces
• Handle with care; avoid compressing, tearing, or contaminating the insulation material
• Wear gloves and eye protection; follow manufacturer torque and fastener guidance when reassembling

Replacement mounting screw for ovens and ranges. Secures panels, brackets, and components. Order a new screw if yours is stripped, missing, or damaged.

Mounting screw for ranges, ovens, and cooktops. Secures panels, brackets, or internal components. Replace if missing, stripped, or damaged.

Replacement 10-24 x 5/8 screw for securing panels, brackets, and trim on ranges and ovens. Needed when original hardware is stripped, missing, or worn.

Mounting screw for electric range, oven, or wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged.

Mounting screw for electric range and wall oven assembly. Secures internal components and panels. Replace if stripped, missing, or damaged during repair.

Specs: 8 - 18 x 0.500

Replacement #8 x 0.500 inch screw for securing panels, trim, and brackets in appliances. Needed when original fasteners are stripped, lost, or missing.

This is a replacement screw used to secure appliance panels and components. It restores proper fastening so panels, trim, or assemblies stay tight and reduce vibration or rattling. What it does

• Fastens panels, brackets, or trim to the appliance chassis
• Helps stop loose or vibrating panels and trim pieces
• Restores proper alignment where a missing or stripped screw causes gaps or movement
• Use when the original screw is missing, damaged, or corroded

• One replacement screw as shown

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the screw head
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep removed screws in a safe place; this screw matches the original before installation

Fastens panels, brackets, and covers inside your range or oven. Replace this screw if missing, stripped, or rusted to secure components properly.

Spacer that maintains proper gap between components in your range or oven assembly. Replace if missing, worn, or damaged to restore correct fit and alignment.

Illuminates your oven interior for visibility while cooking and cleaning. Replace when burned out to restore lighting. Verify fit with your model number.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head