Parts for Dacor ER48DSCHNGH: Burners Assembly Parts

Replace a broken or missing control knob that won't turn smoothly or show settings clearly. This illuminated knob restores precise control and visibility.

This service end cap is a chrome-finish replacement trim piece that restores the appliance's finished appearance and protects the exposed end of the control/trim area from dirt and damage. It matches OEM fit and finish for a seamless repair. What it does:

• Covers and protects the exposed end of the control/trim assembly to prevent dirt, moisture, and wear
• Restores the appliance's original appearance where the end cap is cracked, scratched, or missing
• Helps maintain a secure edge on the control/trim area for proper alignment
• Simple cosmetic replacement to improve appearance after panel or control repairs

• One chrome-finish service end cap

• Disconnect power to the appliance before starting any work
• Installation typically involves removing adjacent trim or a few fasteners; handle trim pieces gently to avoid damage
• Align tabs and clips, then press or fasten the end cap into place without forcing

This service pack includes the burner cap and burner ring used on compatible Samsung gas cooktops and ranges. It restores proper gas flow and stable flame by replacing worn or damaged burner top components. What it does

• Replaces the visible burner cap and surrounding burner ring for one cooktop burner
• Helps restore even flame distribution and consistent heating on the affected burner
• Can resolve ignition issues caused by warped or corroded burner tops
• Useful when the burner shows yellow tipping, uneven flame, or poor simmer performance

• One burner cap and one burner ring service pack

• Turn off gas supply and disconnect power before servicing the appliance
• Remove grates and existing burner components, then fit new ring and cap in correct orientation
• Inspect ignition electrode and gas orifice while servicing; clean or replace if needed

This service pack includes the burner cap and burner ring used on compatible Samsung gas cooktops and ranges. It restores proper gas flow and stable flame by replacing worn or damaged burner top components. What it does

• Replaces the visible burner cap and surrounding burner ring for one cooktop burner
• Helps restore even flame distribution and consistent heating on the affected burner
• Can resolve ignition issues caused by warped or corroded burner tops
• Useful when the burner shows yellow tipping, uneven flame, or poor simmer performance

• One burner cap and one burner ring service pack

• Turn off gas supply and disconnect power before servicing the appliance
• Remove grates and existing burner components, then fit new ring and cap in correct orientation
• Inspect ignition electrode and gas orifice while servicing; clean or replace if needed

This burner base assembly replaces the oven's damaged or worn burner base to restore stable combustion and proper heat distribution for gas ranges. It fits original equipment configurations and mounts where the burner connects to the range. What it does:

• Provides the appliance's burner mounting and gas flow interface for ignition
• Helps restore even flame pattern and consistent heating across the burner
• Replaces cracked, warped, or corroded burner bases that cause poor performance
• Can resolve ignition and flame stability issues when base damage is the cause

• Disconnect the appliance from gas and power before servicing.
• Use proper gas-line fittings and check all connections for leaks after installation.
• Inspect surrounding seals and gaskets; replace if damaged to maintain proper operation.

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

Replace damaged or missing side service trim on your range door. Restores proper appearance and supports door closure. Verify fit with your model number.

Service spill tray catches spills and drips under your cooktop or range. Prevents leaks and protects cabinet floor. Left side installation, 14x24 size.

This service spill tray is a molded replacement tray that sits under the appliance to catch and channel small water leaks and drips, helping protect the cabinet and floor from moisture damage. What it does:

• Collects and directs minor water from leaks, condensation, or ice maker/defrost drip
• Prevents water from pooling under the appliance and reaching flooring
• Replaces cracked, warped, or missing trays that allow leaks to spread
• Helps identify and contain source of slow leaks during diagnosis

• One spill tray (center, 14 x 24 in.)

• Disconnect power (and water supply if applicable) before beginning service
• Remove access panels or components as needed to access the tray; keep fasteners for reassembly
• Verify correct orientation and seating of the tray before restoring power
• If tray was damaged by a leak, repair the underlying cause before installing replacement

Right side spill tray for range cooktops. Installs beneath burners to catch spills and debris. Replace when cracked, warped, or heavily stained.

This replacement spill tray trim restores the black trim piece that surrounds the refrigerator spill/drip area so the interior looks finished and helps channel minor spills away from drawers. Fits the OEM tray opening for a clean seal and appearance. What it does:

• Replaces a cracked, warped or missing spill tray trim that lets spills escape or catch on drawer edges
• Helps direct small food and liquid spills toward the tray for easier cleanup
• Restores proper edge finish so drawers open and close without rubbing
• Prevents debris buildup under the trim that can lead to odors

• High-level: remove the affected drawer or shelf to access the trim; align the trim tabs into the housing and snap into place
• Use gentle pressure to avoid breaking plastic tabs; do not force if resistance is encountered
• Disconnect power only if removal requires moving appliance components that expose electrical parts

Note: Set of 4 pads

Seals the dual burner assembly to the cooktop surface, preventing spills and ensuring proper support. Replace when worn to restore a snug fit and reliable burner operation. Verify fit with your model number.

Loose control panel or vibrating components? This pan head service screw secures boards, brackets, and panels. Simple 5-minute fix with a screwdriver.