Parts for Kenmore 253.27009412 (25327009412, 253 27009412): Cabinet Parts

Water pooling in freezer? This drain screen traps debris before it clogs the drain tube. Quick snap-in replacement restores proper drainage flow.

Fixes uneven cooling or warm top shelves in freezers. This blower wheel restores proper air circulation when the fan stops moving cold air effectively.

This is a right-side breaker strip that serves as an insulating divider between the freezer and refrigerator compartments or between the inner liner and outer cabinet. It helps maintain proper temperature separation and prevents condensation from forming along the cabinet edges. Replace this strip if it is cracked, warped, or if you notice moisture or frost buildup along the right side of the compartment opening.

This is a plastic breaker strip that fits along the upper area of the freezer compartment, serving as a trim piece that bridges the gap between the inner liner and the outer cabinet. It helps provide insulation and a finished appearance at the top of the freezer. Replace this strip if it is cracked, warped, or missing, which can allow cold air to escape and cause frost buildup.

This is a lower breaker strip (divider panel) that fits along the interior of the freezer compartment. It serves as a trim piece that covers the gap between the liner and the outer cabinet, helping to insulate and provide a finished appearance. Replace this part if it is cracked, warped, or missing, which can allow cold air to escape and cause frost buildup or temperature inconsistencies.

Freezer not cooling or running warm? A failed evaporator fan motor stops cold air circulation. DIY-friendly repair typically takes 30-45 minutes.

The Door switch is an OEM replacement part for Frigidaire refrigerators. This part turns the light on/off as the door opens and closes.

Causes of a faulty door switch include normal wear of electrical contacts from repetitive on/off cycles. Moisture exposure may potentially corrode internal connections.

Symptoms of a bad light/switch include:

• The interior light fails to turn on when the door is opened
• The light stays on when the door is closed, leading to potential overheating
• An impact on the refrigerator’s temperature regulation due to the switch not signaling the door's closure

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Light lens cover for refrigerator interior lighting. Replaces cracked, yellowed, or missing lens covers. Snaps into place over bulb compartment.

Replace your dim or flickering refrigerator interior LED light assembly for bright, clear visibility. Essential when light fails or flickers. Verify fit with your model number before ordering.

Seals the evaporator cover to prevent air leaks, frost buildup, and temperature fluctuations. Replace if worn or cracked. Verify fit with your model.

Creates the angled track for the hinge cam to glide smoothly. Replace when the door sticks, won't open fully, or doesn't self-close. Verify fit by model.

Supports and pivots your freezer door for smooth opening and closing. Replace when worn or bent to restore proper alignment, improve sealing, and prevent air leaks or frost buildup. Confirm fit by model number.

Secures door stop to hinge bracket, controlling opening angle. Replace if pin is bent, broken, or missing to restore smooth door operation.

This replacement refrigerator drain hose routes defrost and condensation water from the freezer/drip pan to the drain tray to prevent pooling and ice buildup. It restores proper drainage to help keep the cabinet dry and working reliably. What it does

• Channels defrost and condensation water away from the evaporator and cabinet to the drain pan
• Helps prevent water pooling under or inside the refrigerator
• Reduces risk of ice buildup in the freezer or drain area caused by clogged or damaged hoses
• Works with the unit's drain system and clamps to maintain a watertight connection

• One replacement drain hose

• Disconnect power and water supply before starting any repair
• Remove access panels or shelving as needed to reach the hose and drain area
• Replace clamps and check for proper seating to prevent leaks; avoid kinking or sharp bends

Cabinet corner trim for freezers. Covers and finishes the corner edges of the cabinet exterior. Replace if cracked, chipped, or missing for a clean look.

Supports and pivots the freezer door at the top hinge point. Replace this hinge if cracked, broken, or worn to restore proper door alignment and swing.

Specs: Hex head ,1/4-20 x 5/8

Secures refrigerator door shelf and restores edge trim for stable storage. Replaces cracked, broken, or worn shelf frame to keep items supported.

Upper glass shelf assembly for freezer interior storage. Replace cracked, chipped, broken, or missing shelves to restore organized food storage space.

Replace a cracked, broken, or missing interior shelf in your freezer. Restores stable storage space for organized food placement inside the cabinet.

Secures internal components and panels in your freezer. Replace this support bracket if it's cracked, broken, or missing to restore proper alignment.

Freezer not responding to temperature settings or displaying error codes? This electronic control board restores proper function and system sensing.

This is a wire or plastic storage basket that slides into the freezer compartment to organize and separate frozen foods. It helps maximize storage space and allows easy access to items stored inside. Replace this basket if it is cracked, warped, has broken rails, or no longer slides smoothly on the tracks.

Secures hanging basket to freezer rack. Replaces broken, bent, or missing hanger to restore proper basket support and prevent sagging or detachment.

Fixes a loose or fallen wire basket inside your freezer. This support bracket secures hanging baskets in place for stable storage. Simple DIY repair.

Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.

Replacement screw that secures freezer panels, brackets, and trim. Install when original hardware is missing, stripped, or loose to keep components aligned.

Hex head screw that secures panels, brackets, and internal components in refrigerators and appliances. Replace when missing, stripped, or damaged.

Small mounting bracket that holds shelves or baskets inside your freezer. Replace if cracked, broken, or missing to restore secure, level positioning.

Plastic bearing that acts as a pivot point for freezer door opening and closing. Replace if cracked, broken, or worn from repeated use over time.

Replacement storage divider for upright freezers. Separates and organizes frozen items. Replace if cracked, broken, or missing to restore compartments.

This service data sheet is the manufacturer-issued service document that helps technicians and experienced DIYers access key service information for the appliance. It provides concise reference details needed during diagnostics and repairs. What it does:

• Shows model-specific service notes and factory-published specifications in plain format
• Includes wiring diagrams and component location references commonly used for troubleshooting
• Summarizes diagnostic steps and error code guidance from the manufacturer
• Helps part numbers and service procedures before ordering or replacing parts

• One manufacturer service data sheet (single printed document)

• This is a reference document, not an electrical or replacement part; no installation required
• Keep the sheet with the appliance or service records for future diagnostics
• Follow all safety warnings and procedures in the appliance service manual when performing repairs
• If a digital copy is needed, contact the manufacturer or authorized service provider

Adhesive-backed plastic clip secures wires and small hoses inside your freezer or refrigerator. Replace when loose or damaged to reduce rattling. Confirm fit with your model number before ordering.

Rubber grommet for freezer interior assembly. Replaces worn, cracked, or missing grommets that secure components or reduce vibration in your unit.

Foam insulation sleeve that wraps around the defrost drain tube. Replace if worn, missing, or damaged to prevent condensation and maintain proper insulation.

Mounting screw for freezers and refrigerators. Secures internal components, panels, or shelving. Replace if stripped, missing, or damaged during repairs.

Replacement screw that secures brackets, shelves, trim, panels, and covers inside your appliance. Install when the original is missing, stripped, or corroded.

Plastic bearing that acts as a pivot point for freezer door opening and closing. Replace if cracked, broken, or worn from repeated use over time.