Parts for Dacor CPS130: Cabinet Parts

The Phillips #8 x 3/8 Screw for Electronic Sewing Machines is an essential component for maintaining your sewing machine's performance. This genuine OEM part is specifically designed to fit a variety of electronic sewing machine models, ensuring a perfect and secure fit every time. Crafted with high-quality materials, the Phillips #8 x 3/8 Screw provides durability and reliable fastening, helping to keep your machine stable and functioning smoothly. Whether you need to replace a missing or damaged screw, this part offers the precision and strength required for effective repairs. Using the Phillips #8 x 3/8 Screw for Electronic Sewing Machines ensures that your appliance remains in optimal working condition, enhancing its longevity and your overall sewing experience. Trust in this genuine OEM part to deliver the quality and dependability you expect from your sewing machine.

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

The Electric Wall Oven Cooling Fan is essential for maintaining the optimal temperature within your Samsung electric wall oven. This genuine OEM part ensures that your oven operates efficiently by effectively circulating air to prevent overheating. Designed specifically for Samsung electric wall ovens, it guarantees a secure fit and seamless integration with your appliance. The cooling fan enhances the longevity of your ovenGÇÖs components by reducing heat buildup, which can lead to wear and tear over time. Installing the Electric Wall Oven Cooling Fan is straightforward, allowing you to quickly restore your ovenGÇÖs performance without the need for professional assistance. If your original cooling fan is noisy, malfunctioning, or has stopped working entirely, this genuine OEM part is the perfect replacement to ensure your kitchen appliance functions smoothly. Trust in the quality and reliability of this genuine OEM part to keep your Samsung electric wall oven running efficiently and effectively, providing you with consistent and dependable cooking performance.

This wafer head screw secures panels, brackets, and other components inside your appliance. Replacing worn or missing hardware restores a tight fit, reduces vibration and rattles, and keeps assemblies properly aligned for reliable performance.

• Fastens panels, brackets, or trim with a low-profile wafer head for even clamping
• Replaces stripped, corroded, or missing hardware (#8 x 3/8)
• Helps maintain alignment and reduce vibration or rattling noises
• Restores secure mounting for safe, stable operation

• Disconnect power; also shut off gas before servicing
• Support the panel or component while removing/installing hardware
• Hand-start threads to avoid cross-threading; tighten snugly without overtightening
• Replace screws one at a time to maintain alignment

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

The Gas Line Trimmer Case Top Assembly is designed to seamlessly fit your gas line trimmer, providing robust protection and enhancing its overall functionality. This genuine OEM part ensures a precise fit, maintaining the integrity and performance of your trimmer. Crafted from high-quality materials, the case top assembly offers exceptional durability, guarding your trimmer against daily wear and tear. Its sturdy construction not only extends the lifespan of your equipment but also ensures reliable operation in various conditions. Installing the Gas Line Trimmer Case Top Assembly is straightforward, allowing you to quickly restore your trimmer to its optimal state without any complications. This assembly is compatible with a range of gas line trimmer models, making it a versatile choice for your repair needs. By choosing this genuine OEM part, you guarantee that your trimmer remains efficient and dependable, providing you with a better user experience and peace of mind. Replace your damaged or worn case top with this high-quality assembly to keep your gas line trimmer performing at its best.

The Flexible 1/2" Gas Line Conduit, 60" Length is an essential component for your gas line trimmer setup. This genuine OEM part ensures a secure and reliable connection, providing both flexibility and durability to your appliance. With a length of 60 inches, it allows for versatile installation, accommodating various layouts and reducing strain on your gas line. Designed to meet high-quality standards, this conduit enhances the efficiency of your gas line trimmer by maintaining a consistent and safe flow. Its easy-to-install design makes it a convenient choice for DIY repairs, saving you time and effort. Compatible with a range of Samsung gas line trimmer models, the Flexible 1/2" Gas Line Conduit, 60" Length is the perfect replacement part to restore your appliance's functionality. Trust in this genuine OEM part to ensure long-lasting performance and peace of mind for your gas-powered tools.

The Flexible 1/2" Gas Line Conduit, 60" Length is an essential component for your gas line trimmer setup. This genuine OEM part ensures a secure and reliable connection, providing both flexibility and durability to your appliance. With a length of 60 inches, it allows for versatile installation, accommodating various layouts and reducing strain on your gas line. Designed to meet high-quality standards, this conduit enhances the efficiency of your gas line trimmer by maintaining a consistent and safe flow. Its easy-to-install design makes it a convenient choice for DIY repairs, saving you time and effort. Compatible with a range of Samsung gas line trimmer models, the Flexible 1/2" Gas Line Conduit, 60" Length is the perfect replacement part to restore your appliance's functionality. Trust in this genuine OEM part to ensure long-lasting performance and peace of mind for your gas-powered tools.

The Gas Line Trimmer Cover Plate Light is essential for maintaining the functionality and appearance of your gas line trimmer. This genuine OEM part ensures a perfect fit, seamlessly integrating with your trimmer to provide reliable protection and illumination. Crafted from durable materials, the cover plate light safeguards critical components from dust and debris while enhancing visibility during operation. Installing the Gas Line Trimmer Cover Plate Light is straightforward, allowing you to quickly restore your trimmer to optimal performance. This genuine OEM part is specifically designed for Samsung gas line trimmers, ensuring compatibility and longevity. By choosing this cover plate light, you guarantee that your appliance operates efficiently and safely. Whether you need to replace a damaged cover or upgrade your existing setup, the Gas Line Trimmer Cover Plate Light is the perfect solution to enhance your trimmerGÇÖs durability and functionality.

Made by Dacor.

This broil element heats the top of the oven for broiling and browning, restoring high-heat performance for searing and finishing dishes. Designed to replace a failed or damaged upper heating element. What it does

• Heats from the top of the oven to brown, sear, and broil foods
• Replaces a visibly burnt, broken, or non-heating upper oven element
• Helps fix symptoms such as no broil heat, uneven browning, or visible arcing/sparking
• Works with standard terminal connections used on compatible Samsung ranges

• One broil element (upper oven)

• Disconnect power to the appliance before attempting any service
• Handle element carefully to avoid bending or damaging the tubular element
• Verify terminal connections match your oven and tighten hardware securely

This convection element kit replaces the oven's convection heating element to restore even heat for baking and roasting. Use it when the convection system no longer produces consistent hot air or the oven bakes unevenly. What it does:

• Heats air for the oven's convection cooking mode so the fan can circulate consistent temperature.
• Restores even browning and predictable bake/roast results when the convection element has failed.
• Common symptom indicator: uneven baking or roasting, or visible damage to the element.
• Can be part of repairs when the oven does not reach expected results in convection mode.

• Disconnect power at the breaker before starting any repair — electric shock hazard.
• Access typically requires removing the oven cavity back panel or inner rear panel; use proper tools and follow OEM instructions.
• Inspect wiring terminals and insulation; replace connectors that are corroded or damaged.

Due to manufacturer changes this door latch has been replaced by two other kits. You must contact us with your complete model number for the correct replacement.

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

This OEM part is sold individually and is a relay control board for ovens. An oven relay control board is a circuit board that receives signals from the main oven control board. The relay control board then relays the signal to regulate the oven's essential functions. If the oven is no longer turning on, heating properly, or regulating its temperature, it might be time for a new relay board. Luckily, replacing this part is not a difficult process.To replace the relay board make sure the oven is unplugged. Gain access to the upper back panel on the back of the range and remove the screws. Once the panel is removed access the relay board, and remove the wire harness as well as any individual wires attached to the old board. Make sure to take note of the orientation of the wires. Replug the wires into their correct terminals on the new board and snap the new board back in place. Resecure the upper back panel.This genuine replacement part is sold individually and is compatible with Samsung brand ovens.

This temperature sensor kit replaces a failed refrigerator temperature sensor to restore accurate temperature monitoring and help the control board maintain proper cooling. It's designed for service replacement and OEM fit. What it does:

• Monitors internal compartment temperature so the refrigerator control can regulate cooling cycles.
• Helps prevent overcooling or warming caused by a faulty or open sensor.
• Common symptom fix: refrigerator/freezer running too warm or too cold, or erratic cycling.
• Clears temperature-related error codes when installed in place of a defective sensor.

• Disconnect power to the appliance before starting any repair.
• Handle sensor tip and wiring gently; avoid sharp bends or pinching the harness.
• Route and secure the sensor wiring per OEM locations to ensure correct readings.

This thermal cut-off switch is a high-temperature safety device that interrupts power if the appliance overheats. Replacing a failed cutout restores proper overheat protection and can help address no-heat or shutdown issues caused by an open safety circuit.

• Monitors temperature at its mounting location and opens the circuit if temperatures exceed a safe limit
• A failed/open cutout can cause no heat, intermittent heating, or the unit shutting off during use
• Helps protect components from damage due to overheating
• Location varies by model; typically mounted to a bracket or surface near a heat source

• Disconnect power at the breaker or unplug the appliance before servicing
• Note wire orientation and transfer leads one at a time to the new switch
• Mount in the original position with firm, flush contact for accurate temperature sensing
• After replacement, inspect airflow/venting and nearby fans/filters to address any underlying overheating causes

This thermal cut-off switch is a high-temperature safety device that interrupts power if the appliance overheats. Replacing a failed cutout restores proper overheat protection and can help address no-heat or shutdown issues caused by an open safety circuit.

• Monitors temperature at its mounting location and opens the circuit if temperatures exceed a safe limit
• A failed/open cutout can cause no heat, intermittent heating, or the unit shutting off during use
• Helps protect components from damage due to overheating
• Location varies by model; typically mounted to a bracket or surface near a heat source

• Disconnect power at the breaker or unplug the appliance before servicing
• Note wire orientation and transfer leads one at a time to the new switch
• Mount in the original position with firm, flush contact for accurate temperature sensing
• After replacement, inspect airflow/venting and nearby fans/filters to address any underlying overheating causes

The Electric Wall Oven Door Seal is essential for maintaining the efficiency and performance of your Samsung electric wall oven. This high-quality Svc-door gasket creates a tight seal around the oven door, ensuring consistent temperature control and preventing heat from escaping during cooking. Crafted from durable materials, the door seal is designed to withstand the high temperatures and frequent use typical of electric wall ovens, providing long-lasting reliability. This genuine OEM part is specifically compatible with a range of Samsung electric wall oven models, ensuring a perfect fit and easy installation. If your original door gasket is worn out, cracked, or no longer sealing properly, the Electric Wall Oven Door Seal is the ideal replacement to restore your oven's functionality and improve its energy efficiency. By choosing this genuine OEM part, you ensure optimal performance and extend the life of your appliance, enhancing your overall cooking experience.

This OEM Replacement Part is a genuine oven door window pack assembly made for Samsung ranges. It forms a transparent, heat-resistant barrier between the inner and outer oven door glass panels.

Causes of a bad window pack can include physical damage from impact, wear and tear over time, and exposure to high temperatures that can cause warping or discoloration. Such issues can affect the appliance's performance and safety.

Symptoms of a bad window pack include:

• Visible cracks or breaks in the window
• Cloudiness or discoloration obstructing visibility
• Difficulty in maintaining a proper seal
• Warping or misalignment of the window

This OEM Samsung part is designed to fit specific models, ensuring a perfect fit and reliable performance.

This OEM Replacement Part is a genuine oven door window pack assembly made for Samsung ranges. It forms a transparent, heat-resistant barrier between the inner and outer oven door glass panels.

Causes of a bad window pack can include physical damage from impact, wear and tear over time, and exposure to high temperatures that can cause warping or discoloration. Such issues can affect the appliance's performance and safety.

Symptoms of a bad window pack include:

• Visible cracks or breaks in the window
• Cloudiness or discoloration obstructing visibility
• Difficulty in maintaining a proper seal
• Warping or misalignment of the window

This OEM Samsung part is designed to fit specific models, ensuring a perfect fit and reliable performance.

This double-sided service tape provides a reliable adhesive bond for appliance trim, panels and small parts during service or repairs. The pre-cut rolls help restore secure attachment and reduce movement without visible fasteners. What it does:

• Adheres trim, foam, gaskets and light panels where clips or screws are missing or worn
• Helps stop rattling or shifting caused by loose adhesive-backed parts
• Provides a low-profile bond for cosmetic pieces and lightweight components
• Useful for securing wiring harnesses and padding in tight spaces

• Ensure both surfaces are clean and completely dry before applying tape for best adhesion
• Press firmly across the tape to fully seat the adhesive; allow time for bond to set
• Avoid stretching the tape; trim to fit as needed
• Exercise caution and disconnect power when working near electrical components

Set of two hinges for Stainless models. For Black or Artic models, order 701034.

Set of two hinges for Black or Artic models. For Stainless models, order 701035.

The Upright Vacuum Self-Clean Indicator Nameplate is essential for maintaining the optimal performance of your Samsung upright vacuum. This genuine OEM part ensures that the self-clean indicator functions accurately, allowing you to monitor when your vacuum requires maintenance. Designed specifically for Samsung upright vacuum models, it offers seamless compatibility and easy installation, helping you keep your appliance running smoothly without any hassle. The durable construction of the Self-Clean Indicator Nameplate guarantees long-lasting performance, providing reliable feedback on your vacuumGÇÖs self-cleaning status. By replacing a damaged or malfunctioning nameplate with this genuine OEM part, you enhance the reliability of your vacuum and extend its lifespan. Whether your original indicator is cracked, missing, or no longer responsive, the Upright Vacuum Self-Clean Indicator Nameplate is the perfect solution to restore your vacuumGÇÖs seamless operation. Enjoy a consistent and efficient cleaning experience by choosing this high-quality, genuine OEM part for your Samsung upright vacuum.

This service side shield is a factory-style inner door shield that protects and supports internal components on the left refrigerator door, helping keep the door interior intact and functioning properly. What it does:

• Covers and protects wiring, insulation, and dispenser components behind the left inner door panel
• Helps maintain proper door alignment and support for mounted parts
• Prevents direct contact and wear to interior door components
• Can reduce drafts or moisture intrusion when the shield is damaged or missing

• Disconnect power to the appliance before starting any repairs.
• Replacement typically requires removing the inner door panel; keep fasteners organized for reassembly.
• Handle carefully to avoid cracking the plastic; use proper trim tools if needed.