Need Help?
Call or text
Show parts
The carburetor is responsible for combining fuel and air within the engine to make internal combustion happen. A carburetor gasket acts as a boundary between where the air is and isn’t meant to be within an engine. If the carburetor gasket is blown, the air to fuel ratio will be off, and the motor will not combust properly. A bad gasket will cause the motor to stall out at idle or vibrate badly. The throttle will not behave properly either. Using a screwdriver, install this genuine OEM part by taking apart the carburetor, removing the old gasket, and putting the new one in place. Be sure to clean all the parts when taking apart the carburetor. This part is sourced directly from the manufacturer, and it is shipped individually. It is compatible with Craftsman, Cub Cadet, MTD, Huskee, and many more brands of snowblowers, lawnmowers, tillers, chainsaws, chippers, and many other tools with small motors.
Usually ships within 4 - 14 days
A carburetor gasket works by providing a secure seal, preventing leaking between the carburetor and the insulator plate. Over time, gaskets can become worn down, cracked, or torn. This affects the efficiency or your equipment’s engine. If your carburetor has a leak due to a damaged carburetor gasket, the engine may run roughly or not start at all. This repair should be easy and take only a short time. Remove the damaged carburetor gasket and replace it with a new genuine OEM part. A set of screwdrivers is needed to make this repair possible. The carburetor gasket will work with small engines like log splitters, snowblowers, and tillers. Some of the many brands that are compatible with this carburetor gasket are Craftsman, Cub Cadet, MTD, Troy-Bilt, Yard Machines, and Yard-Man. Sold individually.
This replacement part is a carburetor assembly. The carburetor creates an enriched fuel and air mixture which is sent to the spark plugs to start the engine on a machine.Signs of a damaged carburetor include an engine that is hard starting or won't start at all. Make sure the engine is completely turned off and cooled down prior to replacing this part. Wear work gloves when replacing this part.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.
This part is discontinued by the manufacturer and is no longer available for purchase.
This is a genuine OEM replacement fuel bowl bolt for a snowblower, tiller, or chipper engine. The fuel bowl is a part of the fuel filtration system designed to prevent sediment from clogging up the carburetor. Fuel moves from the fuel tank and passes through the fuel bowl to catch any debris. It is essentially a particle filter. This bolt mounts the fuel bowl in place. The two most likely reasons why a fuel bowl bolt might need replacing are general wear and tear or loss. This bolt is located fairly close to the outside of the engine, making it more susceptible to the elements. Over time, the bolt may corrode and will need replacing. If lost while making a repair to the fuel bowl itself, the fuel bowl bolt will need to be replaced. Use a wrench to make the repair. This fuel bowl bolt is a top of the line replacement part for Bolens, Yard Machines, MTD, Troy-Bilt, Huskee, and Yard Man appliances. This part does not include any additional hardware, as it ships individually.
The fuel drain plug gasket creates a solid, leak-proof seal in the fuel drain. The gasket goes into the connection between the drain and the fuel tank. In the event that this gasket fails, there could be fuel leakage from the equipment that could be costly or even dangerous. Make sure to inspect and replace all gaskets regularly to ensure that the engine is working efficiently. This gasket is made of durable rubber material and is simple to install. drain the fuel to provide access to the drain plug and the fuel line without spilling fuel everywhere. Always wear gloves and make sure to disconnect the spark plug or disable the engine before working on any outdoor power equipment. This OEM replacement fuel drain plug is compatible with several tillers, snowblowers, lawnmowers, tractors, and other outdoor power equipment made by Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, MTD, Huskee, Yard-Man, and MasterCut. Sold individually.
The fuel bowl gasket provide an airtight seal to the fuel bowl. This will ensure that air, along with dirt and debris, do not make their way into the fuel. Gaskets will wear out over time. They will start to crack and fall apart, and they will no longer be capable of providing you with the necessary seal for the fuel bowl. The repair is easy and should only take between half an hour and an hour. This is an OEM replacement fuel bowl gasket part that is made from high-quality, durable rubber. Each of the fuel bowl gaskets is sold individually. The gasket can work well with many different types of outdoor power equipment, including snowblowers, chipper-shredders, tillers, lawn tractors, mowers, and other small engines. The fuel bowl gasket is compatible with many brands, including MTD, Yard Machines, Yard-Man, Troy-Bilt, Huskee, Cub Cadet, and Mastercut.