Parts for Ge ZISS480DMC: 10 - Case Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Bottom hinge bushing for refrigerator freezer doors. Installs at the lower hinge to help the door pivot smoothly. Replace if worn, cracked, or missing.

Bottom hinge bushing guides the refrigerator door hinge pin for smooth pivoting. Replace if worn, cracked, or missing to restore proper alignment.

Replace a cracked, worn, or missing refrigerator door hinge pin. This lower hinge pin secures the door to the cabinet and allows smooth opening and closing.

Left hand base channel provides lower cabinet support for your freezer. Replace if cracked, bent, or damaged to restore proper alignment and stability.

Door closure spacer for side-by-side refrigerators. Replaces broken, worn, or missing spacers that ensure proper door alignment and seal.

Shoulder bolt for refrigerator assembly. Secures internal components and panels. Replace if bolt is stripped, missing, or no longer holding parts firmly.

Nylon hinge arm secures and guides refrigerator doors for smooth pivoting and alignment. Replace if cracked, broken, or worn to restore door support.

Controls freezer door linkage assembly alignment. Replace if the actuator is cracked, broken, or worn, causing misaligned or sticking linkages.

Bottom door hinge screw secures the lower hinge assembly to your refrigerator door. Replace if stripped, missing, or damaged to restore door alignment.

Replacement door stop cam riser for freezers and refrigerators. Installs on door hinge to control door swing and positioning. Replace if cracked or worn.

Right-hand base channel provides lower structural support for refrigerator doors. Replace if bent, cracked, or missing to restore proper door alignment.

Secures and aligns your refrigerator door hinge for smooth opening and closing. Replace this bracket if cracked, bent, or broken to restore proper support.

Replaces worn or broken rear drawer roller in refrigerators and freezers. Restores smooth drawer glide and prevents sticking or scraping on tracks.

Plastic pulley wheel for refrigerator door hinge assemblies. Replaces cracked, broken, or worn spring wheels causing binding or rough door movement.

Bottom hinge case for side-by-side refrigerators. Covers and protects the lower door hinge assembly. Replace if cracked, broken, or missing.

Refrigerator door hinge link actuator assembly. Installs at the bottom hinge to control door closing. Replace if cracked, broken, or spring damaged.

Right side case trim for refrigerators. Covers the side panel edge for a finished look. Replace if cracked, broken, or missing for proper appearance.

Cosmetic trim piece that covers the side edge of the freezer case on bottom-mount refrigerators. Replace if cracked, broken, or missing to restore appearance.

Top case trim piece for 48-inch side-by-side refrigerators. Replaces cracked, broken, or missing trim along the top edge of the refrigerator case.

Left grille hinge assembly for bottom-mount refrigerators. Replaces broken, cracked, or worn hinge components that secure the grille panel to the door.

Grille assembly for refrigerator front panel. Replaces cracked, broken, or missing grille covers. Attaches to unit exterior for finished appearance.

Upper door hinge for refrigerator fresh food compartment. Replace this hinge if it's cracked, broken, or worn, causing improper door alignment or support.

Base support shaft that keeps the refrigerator drum aligned and rotating smoothly. Replace if worn, damaged, or causing wobble and alignment issues.

Plastic cover that conceals and protects water supply tubing behind the lower kickplate. Replace if cracked, broken, or missing for a finished look.

Replacement monogram badge for your cooktop control panel. Install this decorative nameplate if your original is scratched, faded, or missing.

Secures dishwasher components in place. Replace if broken, loose, or missing to prevent rattling and ensure proper part alignment. Verify fit with your model.

Fix refrigerator lights that won't turn on or smell like burning wires. This fresh food compartment light transformer powers LED lighting circuits.

Refrigerator lights not working or flickering? This light transformer supplies power to your refrigerator's interior lighting system. Direct fit part.

Refrigerator not cooling properly or freezer icing up? The defrost thermostat monitors evaporator temperature during defrost cycles. DIY repair in 30-45 minutes.

Fixes freezer or fridge light staying on, or ice dispenser not working when door closes. Simple 5-minute DIY fix with putty knife—video included.

Interior light not working when door opens? This light switch controls refrigerator illumination. DIY-friendly install takes 30-45 minutes with video.

Replacement toe kick grille that covers the base of your refrigerator. Needed when original panel is cracked, broken, or missing. Installs at bottom.

Mounting screw for refrigerator doors, shelves, kickplates, and interior components. Replace missing, stripped, or corroded screws during repairs.

Connects water supply tubing sections in your refrigerator. Replace this plastic compression union if it's cracked, leaking, or broken. Installs inline.

This water tube cover protects and conceals the refrigerator's external water line, helping prevent accidental damage and keeping the interior tidy. Direct replacement for a cracked, broken, or missing cover. What it does:

• Shields the water line from impacts and wear that can lead to leaks
• Keeps the water tube routed neatly to reduce snagging or pinching
• Helps maintain proper airflow around the tube to avoid contact-related issues
• Commonly replaced when the cover is cracked, broken, warped, or missing

• Always unplug the appliance and shut off the water supply before starting any repair
• Remove interior panels or door trim per OEM instructions to access the tube cover
• Use basic hand tools; avoid forcing clips or tabs to prevent damage
• If water or ice is present, dry the area and check tubing for damage before reassembly

Replacement door closure spring for refrigerators. Installs between door hinge and leveling leg box. Replace if broken, corroded, or missing.

This corner key assembly secures and finishes a refrigerator door corner, restoring proper alignment and a clean appearance. It replaces a cracked, broken, or missing corner piece to help the door close evenly and look factory-original. What it does:

• Provides structural support at the door corner to maintain proper edge alignment
• Covers and protects the underlying corner area from damage and wear
• Helps reduce visible gaps or misalignment that can affect sealing
• Restores the cabinet's finished appearance after impact or deterioration

• One corner key assembly

• Disconnect power to the appliance before starting any repair
• Remove door or trim per manufacturer instructions to access the corner area
• Install with original fasteners or clips; do not force or over-torque plastic snaps
• If hinge or door alignment issues persist, inspect associated hinges and gaskets

Replacement screw secures panels, brackets, and trim on washers, dryers, and refrigerators. Needed when original fasteners are stripped or missing.