Parts for Ge ZSGW420DMC: 10 - Case Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Bottom hinge bushing for refrigerator freezer doors. Installs at the lower hinge to help the door pivot smoothly. Replace if worn, cracked, or missing.

Bottom hinge bushing guides the refrigerator door hinge pin for smooth pivoting. Replace if worn, cracked, or missing to restore proper alignment.

Left hand base channel provides lower cabinet support for your freezer. Replace if cracked, bent, or damaged to restore proper alignment and stability.

Door closure spacer for side-by-side refrigerators. Replaces broken, worn, or missing spacers that ensure proper door alignment and seal.

Shoulder bolt for refrigerator assembly. Secures internal components and panels. Replace if bolt is stripped, missing, or no longer holding parts firmly.

Nylon hinge arm secures and guides refrigerator doors for smooth pivoting and alignment. Replace if cracked, broken, or worn to restore door support.

Controls freezer door linkage assembly alignment. Replace if the actuator is cracked, broken, or worn, causing misaligned or sticking linkages.

Bottom door hinge screw secures the lower hinge assembly to your refrigerator door. Replace if stripped, missing, or damaged to restore door alignment.

This shear pin secures the washer agitator to the drive shaft and protects the transmission by designed failure when the agitator binds. It's a small, low-cost part that prevents costly gear or motor damage. What it does:

• Locks the agitator to t

Right-hand base channel provides lower structural support for refrigerator doors. Replace if bent, cracked, or missing to restore proper door alignment.

This front roller assembly supports the dryer's drum at the front, helping the drum turn smoothly and quietly. Replacing a worn roller restores proper drum alignment and reduces noise or scraping during operation. What it does:

• Supports the fron

This rear wheel assembly replaces a worn or broken refrigerator drawer roller to restore smooth, stable movement and proper drawer alignment. It helps prevent sticking, scraping, and uneven wear on the drawer track. What it does:

• Replaces a dama

This spring wheel is a replacement plastic pulley used in appliance hinge and tension assemblies to restore smooth movement and proper tension. It helps reduce noise and prevents binding from a worn or broken wheel. What it does:

• Guides and reta

Bottom hinge case for side-by-side refrigerators. Covers and protects the lower door hinge assembly. Replace if cracked, broken, or missing.

Refrigerator door hinge link actuator assembly. Installs at the bottom hinge to control door closing. Replace if cracked, broken, or spring damaged.

Right side case trim for refrigerators. Covers the side panel edge for a finished look. Replace if cracked, broken, or missing for proper appearance.

Upper door hinge for refrigerator fresh food compartment. Replace this hinge if it's cracked, broken, or worn, causing improper door alignment or support.

This base shaft is the support shaft that helps the washer's tub or drum stay aligned and rotate smoothly. Replacing a worn shaft restores proper drum support and reduces noise, wobble, and uneven operation. What it does:

• Provides a stable pivot

Plastic cover that conceals and protects water supply tubing behind the lower kickplate. Replace if cracked, broken, or missing for a finished look.

This fill tube heater warms the refrigerator ice maker fill tube to prevent freezing so water can reach the ice maker reliably. It helps restore proper ice production and reduces intermittent fill failures caused by frozen lines. What it does:

• Heats the fill tube area to melt or prevent ice buildup in the water passage
• Helps ensure the ice maker fill valve can deliver water into the ice mold
• Common symptom: ice maker not filling or making reduced amounts of ice after a freeze-up
• Works as a targeted repair when the fill tube freezes but the valve and icemaker otherwise operate

• Disconnect power and shut off the water supply before starting any repair
• Follow OEM service manual for routing and mounting to avoid contact with sharp edges or moving parts
• Verify electrical connections and continuity per manufacturer procedures before reassembly

Adhesive logo nameplate for refrigerators and freezers. Replaces cracked, peeling, or missing exterior branding plates on appliance doors.

If your freezer controls aren't working or the display is blank, this transformer supplies power to freezer control circuits. Restores normal function.

A 2 amp replacement fuse that protects low-current appliance circuits by opening when an overcurrent occurs. Install this direct-replacement fuse to restore power to control circuits and stop damage from a blown fuse. What it does:

• Interrupts cu

The GE Door Light Switch is an OEM Replacement Part that serves as the Freezer Door Fan and Light Switch. The switch is made from metal, wiring, and plastic. It plays an essential role in energy conservation by turning off the light when the refrigerat

Interior light not working when door opens? This light switch controls refrigerator illumination. DIY-friendly install takes 30-45 minutes with video.

Replacement toe kick grille for your refrigerator. Installs at the base to cover the bottom opening. Order a new one if yours is cracked or missing.

Size: 10-32 GXTT FLP.595 S

Connects water supply tubing sections in your refrigerator. Replace this plastic compression union if it's cracked, leaking, or broken. Installs inline.

This molded white cover protects and routes the refrigerator's water tube, keeping the line secure and helping prevent kinks or contact with cold surfaces that can lead to freezing. It restores proper tubing placement behind the fresh-food compartment. What it does

• Shields and secures the water tube to maintain correct routing inside the cabinet
• Reduces risk of tube contact with cold panels that can contribute to ice buildup or restricted flow
• Helps prevent chafing or pinching that can cause leaks or flow issues
• Supports reliable water delivery to the dispenser and ice maker by keeping tubing in place

• One white water tube cover

• Disconnect power and shut off the water supply before starting work
• Remove interior shelves or panels as needed for access; handle trim carefully to avoid damage
• Install by seating the cover over the water tube and securing any retaining clips or screws removed during disassembly
• Replace the tubing before reassembling

The Spring Closure is an OEM part for GE refrigerators. This spring aids in the automatic closing of the refrigerator door, ensuring it seals tightly after each use to maintain optimal internal temperatures.

Causes of a bad spring closure can i

Replaces broken or fatigued refrigerator door closure spring. Restores tension for secure door closing and proper seal. Blue torsion spring.

This corner key assembly secures and finishes a refrigerator door corner, restoring proper alignment and a clean appearance. It replaces a cracked, broken, or missing corner piece to help the door close evenly and look factory-original. What it does:

• Provides structural support at the door corner to maintain proper edge alignment
• Covers and protects the underlying corner area from damage and wear
• Helps reduce visible gaps or misalignment that can affect sealing
• Restores the cabinet's finished appearance after impact or deterioration

• One corner key assembly

• Disconnect power to the appliance before starting any repair
• Remove door or trim per manufacturer instructions to access the corner area
• Install with original fasteners or clips; do not force or over-torque plastic snaps
• If hinge or door alignment issues persist, inspect associated hinges and gaskets

A single replacement screw used to secure appliance panels, trim, and internal brackets so components stay aligned and reduce rattling. Simple, direct-fit fastener for restoring proper mounting and stable operation. What it does:

• Secures panels,