Parts for Poulan 400E: Chainsaw Parts

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.

This is genuine OEM replacement pinion designed for use with select chainsaws. The pinion works in combination with the sprocket/gear sprocket to rotate the chain. The power is delivered to the pinion, which rotates and then causes the sprocket to rotate, leading to the chain action that is needed for a chainsaw to work. Over time, gears and sprockets can get worn down with regular use. They may also be damaged by other incidents or fail as a result of another repair that wasn't taken care of promptly. Any drive assembly parts, including this pinion, should be replaced immediately in the event that they do fail. This OEM pinion is manufactured to strict standards by Husqvarna. The part is compatible with multiple models of chainsaws and dozens of brands including Craftsman, Poulan, and Poulan Pro. Also known as the drive gear, this pinion is made of durable materials and is sold individually. In some cases, people may want to purchase the entire drive assembly, but that may not be necessary. This is where replacing just the pinion can be a good choice. Be sure to wear gloves and allow the chainsaw's engine to cool completely before doing any repairs.

This is a replacement chainsaw retaining ring. The sprocket is commonly attached to the gear drive shaft in chainsaws with a retaining ring. If the original retaining ring becomes damaged, the chainsaw will not operate properly.Needle-nose, snap ring, or retaining ring pliers may be required to remove the old, damaged retaining ring. To install the new retaining ring, snap ring or needle-nose pliers should be placed into the small holes located on the new retaining ring. Then, slightly open the pliers to pull back the retaining ring's arms, opening up the ring center. Careful attention should be paid while opening the retaining ring to avoid overstretching. Overstretching the retaining ring would lead to the sprocket not correctly attaching to the chainsaw's gear drive shaft. Finally, with proper sizing, the retaining ring can be placed over the wheel grove, attaching the sprocket to the drive shaft.This retaining ring is an OEM part that is sourced directly from the manufacturer. This retaining ring is designed to replace damaged rings in Poulan, Poulan Pro, Husqvarna, and Craftsman chainsaws. The retaining ring is sold individually.

This replacement part is a pinion gear. It is a genuine replacement part made by Husqvarna. This part is typically found in chainsaws and helps the spinning and turning mechanism of the chain to operate properly during use.A new pinion gear might be needed if the user notices that the chain in the chainsaw is not rotating properly or smoothly. This can be due to a stripped pinion gear and the problem should be fixed once the part is replaced. Be sure to wear work gloves as the user will be working closely to the blades in the chainsaw. Refer to the user manual for more detailed information on how to replace this specific part. This pinion gear is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This authentic OEM part is a replacement momentary switch meant for a chainsaw or edge trimmer. Also known as a kill switch, a momentary switch acts as a safety measure to immediately shut off the appliance's motor. If the user begins to lose control of the appliance, they can simply hit the momentary switch and the engine will disengage even if it is not currently in the off position. This helps to prevent accidents and bodily harm. When engaged, the engine requires a five second waiting period before it can restart. Over time and through repeated use, switches can naturally become worn out. They may also be damaged if knocked against something hard on accident. Replacing this switch will require a screwdriver to access the switch located in the handle of the appliance. Once accessed, the switch can easily be replaced by detaching the wires and inserting the new part. Be sure to follow the user's manual as this process will vary depending on the appliance. This part is sourced directly from its original manufacturer and will work with Poulan and Weed Eater appliances. This part ships individually.

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

Here is a replacement check valve for use with a wide range of different types of equipment and machines. The check valve is a one-way valve that is used in various types of lines as a means to prevent backflow. In the case of engines, the valve is used as a means to prevent fuel or oil from flowing backward. The check valve has the potential to wear down or crack over time. If this happens, it will no longer be capable of stopping backflow from oil or gas, and it will need to be replaced. Owners should examine the check valve when they are inspecting their machine to see if it is still in good working condition. This is a genuine OEM replacement check valve. It is made from durable plastic and is sold individually. The part can be used for more than 150 models of chainsaws. It can also be used with some models of trash compactor, string trimmers, and hedge trimmers. Compatible brands include Craftsman, Husqvarna, Weed Eater, Poulan, Poulan Pro, Broan, Paramount, and Turf King.

This oil pickup is a component used in chainsaws to move oil between the oil pump and the tank. One end of the pickup screws or bolts onto the oil pump, while the other end has a strainer. There is a mesh screen on the strainer to remove large particles from the oil while moving oil to the pump. All oil that goes into the pump will need to move through the oil pickup first. If there is no oil flowing to the bar of the chainsaw, this indicates there is a problem and it may need to be replaced.The screen that filters out debris helps prevent items from getting into the tubing to cause a clog. As time goes on, the rubber elbow of the oil pickup can start to get hard and may begin to crack. If this occurs, the bar oiler will not be able to continue pumping oil to the bar. This oil pickup is created for chainsaws made by Craftsman, Poulan, and Poulan Pro. This is an OEM part sourced directly from the manufacturer and is sold as an individual component.

This is a genuine tapping screw replacement uses in certain models of outdoor lawn and garden equipment engines. This replacement screw is standard hardware on several units, and it has a variety of applications. Owners will need to consult their parts diagram for exact location and use. The screw is made of durable metal, but it is also exposed to constant heat and vibrations when the machine is in use, which can cause wear, damage, or even breakage over time. In some cases, the screw may become loose or get lost in the course of other repairs. In this case, a replacement will also be necessary. It's best to choose a genuine OEM screw like this model from Poulan. This screw is compatible with several blowers, saws, trimmers, and hedge trimmers from Poulan, as well as select units from Weed Eater, Jonsered, Paramount, and Husqvarna. A hex screwdriver or allen key will be required to replace this screw. Be sure to wear gloves and allow equipment to cool before working. This general use screw might be good to purchase in multiples to keep extras on hand in case of emergency. Each screw is sold as an individual part.

This is a replacement chainsaw retaining ring. The sprocket is commonly attached to the gear drive shaft in chainsaws with a retaining ring. If the original retaining ring becomes damaged, the chainsaw will not operate properly.Needle-nose, snap ring, or retaining ring pliers may be required to remove the old, damaged retaining ring. To install the new retaining ring, snap ring or needle-nose pliers should be placed into the small holes located on the new retaining ring. Then, slightly open the pliers to pull back the retaining ring's arms, opening up the ring center. Careful attention should be paid while opening the retaining ring to avoid overstretching. Overstretching the retaining ring would lead to the sprocket not correctly attaching to the chainsaw's gear drive shaft. Finally, with proper sizing, the retaining ring can be placed over the wheel grove, attaching the sprocket to the drive shaft.This retaining ring is an OEM part that is sourced directly from the manufacturer. This retaining ring is designed to replace damaged rings in Poulan, Poulan Pro, Husqvarna, and Craftsman chainsaws. The retaining ring is sold individually.

This is a six-pin sprocket used in many models of chainsaws. The sprocket is an integral component of a chainsaw since it drives the chain on the machine, transfering the power to the chain so it can cut through wood effectively. Due to the high speeds and vibrations created by the chain, this item may become worn out and need to be replaced. The best way to determine whether the sprocket is worn out is by manually rotating the chain on the chainsaw. If the chain is tensioned correctly and the chain rotates smoothly before becoming loose or hard to turn, the sprocket likely has worn teeth. This can be checked by loosening the bar nuts and taking off the bar, chain, and cover. The sprockets will be exposed and an inspection can be done visually. Look for teeth that are grooved or notched, which indicates the sprocket will need to be replaced.This six-pin sprocket is a genuine OEM replacement part that is sourced directly from the manufacturer. The component is sold individually. The sprocket is compatible with various chainsaws manufactured by Craftsman, Poulan, and Poulan Pro.

This is an authentic replacement part for the chain catcher used on chainsaws. The chain catcher is an important safety feature. In the event that the chainsaw chain becomes loose from the track or breaks, the chain catcher keeps it from sailing off the guide bar. The chain catcher is made from metal and it tends to be very durable. However, corrosion and other types of damage may prevent it from being effective. If the chain catcher is damaged or if it is lost, it should be replaced before using the chainsaw again. This is a genuine OEM replacement chain catcher that is sold individually. The screw used to secure the catcher to the chainsaw is sold separately. Buyers may want to buy the parts at the same time. This piece is specifically for use with chainsaws. Compatible brands include Husqvarna, Craftsman, Poulan, and Poulan Pro. When purchasing the chain catcher, buyers must be sure it is the correct option for their make and model.

This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement part is a pin. This is a genuine replacement part made by Husqvarna. Pins are very small but important parts of different machines and appliances. Pins are able to hold different parts together to allow for the machine as a whole to operate properly. A new pin might be needed if the current one is visibly missing or damaged. Pins can easily become lodged into place. If this is the case it is possible that the pin can no longer operate properly. This can be due to normal wear and years after a long while of normal use. This repair should be fairly simple and require only common household tools and possible pliers if the previous pin is stuck in place. This part is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

This bar adjustment retainer is an integral part of the bar adjustment mechanism that assists with securing the screw in many kinds of lawn and garden equipment. The retainer is made of durable metal and is used to replace a faulty, broken, or damaged original part. Sometimes the bar adjustment retainer will break or become damaged and need to be replaced.If the retainer breaks, it can cause the bar adjustment screw to become damaged or stripped. Inspecting for damage requires taking apart the equipment. Use work gloves to remove the chain bar cover and get access to the retainer. Replace it with a new retainer and screw. The bar adjustment pin should be placed at the end of the screw. Thread the screw through until it catches on the retainer. Once that's complete, the other parts can be reassembled.This bar adjustment retainer is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The retainer is made to be used with string trimmers, edgers, hedge trimmers, pole pruners, and chainsaws created by Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

This nut is used to attach a mounting bar to a chainsaw or pole saw. The nut attaches in slightly different ways depending on the product, but it will feed a bolt that attaches the base of the bar to the pole or housing of the saw. If the nut becomes stripped or corroded due to exposure to the elements, it will need to be replaced. A socket wrench and a socket set are needed to install the part. simply screw it into the chain bar studs, making this a quick and easy replacement. The flat side of the nut should face outward to create a flush effect with the rest of the handle. The other side will fit into the bar. This part sold independently. It works with both Poulan and Husqvarna products and is a genuine OEM product sourced directly from the manufacturers.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.