Parts for Poulan PPB5000P: Chainsaw Parts

This is a replacement sprocket for use in various types of handheld lawn and garden tools. It is sourced directly from the manufacturer and is identical to the sprockets found in the original equipment. Sprockets can be used for a range of applications. They are often used as a means to drive the chain around the chain bar on a chainsaw or pruner, for example. The metal sprocket could need to be replaced at some point. Over time, it could start to wear down, or there is a chance that it could bend slightly or corrode. This would reduce its effectiveness, and it could even present a danger to the user. Owners should inspect the sprocket when they are doing routine maintenance and replace it if needed. Replacement of the part is typically simple to do. The sprocket is a genuine OEM part that is sold individually. It is used for chainsaws and pole pruners, and it can be found in some trimmer attachments. It is compatible with certain models from Husqvarna, Poulan, and Poulan Pro.

This nut is used to attach a mounting bar to a chainsaw or pole saw. The nut attaches in slightly different ways depending on the product, but it will feed a bolt that attaches the base of the bar to the pole or housing of the saw. If the nut becomes stripped or corroded due to exposure to the elements, it will need to be replaced. A socket wrench and a socket set are needed to install the part. simply screw it into the chain bar studs, making this a quick and easy replacement. The flat side of the nut should face outward to create a flush effect with the rest of the handle. The other side will fit into the bar. This part sold independently. It works with both Poulan and Husqvarna products and is a genuine OEM product sourced directly from the manufacturers.

Sometimes known as a chain tensioner, this kit is used to adjust the bar of a chainsaw, pruner, or pole saw to increase or decrease the amount of tension in the chain. Having an overly tense chain can cause friction with the bar, which could lead to an engine fire. A chain that is too loose has a chance of kicking back or even losing the chain mid-use, which would be incredibly dangerous. Chains naturally become looser over time, so be sure to regularly check the status of the chain. Having the right amount of tension is critical for the saw to work properly. Making adjustments is easy with our genuine OEM bar adjustment kit sourced straight from the manufacturer. Simply remove the clutch cover and find the adjustment assembly in the cover. Remove it and thread the new chain tensioner onto the assembly. Reassemble the clutch cover and be sure to line up all the corresponding parts. Compatible with Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is shipped individually and only a screwdriver is needed to make this repair.

This adjustable pin bar is used on chainsaws and other lawn and garden equipment to ensure a blade is adjusted to the appropriate rate of tension. When the chainsaw blade is properly adjusted, it will cut faster and better. The pin bar is made out of a durable metal but can become damaged over time. If the pin bar is not working correctly or has broken, it will need to be replaced.If a chainsaw or pole pruner is no longer performing as well as it used to, the adjustable pin bar may need to be replaced. To replace this pin, the cover of the chainsaw will need to be removed. Take the gear that has the screw and pin bar on it out of the machine. Next, remove the broken adjustable pin bar and replace it with a new part. Reassemble the tool for it to be ready to use.This adjustable pin bar is designed for use on Craftsman, Poulan, Poulan Pro, and Husqvarna chainsaws, pole pruners, and string trimmers. It is a genuine OEM replacement component that is directly sourced from the manufacturer. The part is sold individually.

This bar adjustment retainer is an integral part of the bar adjustment mechanism that assists with securing the screw in many kinds of lawn and garden equipment. The retainer is made of durable metal and is used to replace a faulty, broken, or damaged original part. Sometimes the bar adjustment retainer will break or become damaged and need to be replaced.If the retainer breaks, it can cause the bar adjustment screw to become damaged or stripped. Inspecting for damage requires taking apart the equipment. Use work gloves to remove the chain bar cover and get access to the retainer. Replace it with a new retainer and screw. The bar adjustment pin should be placed at the end of the screw. Thread the screw through until it catches on the retainer. Once that's complete, the other parts can be reassembled.This bar adjustment retainer is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The retainer is made to be used with string trimmers, edgers, hedge trimmers, pole pruners, and chainsaws created by Craftsman, Husqvarna, Poulan, and Poulan Pro. This part is sold individually.

The saw guide bar is what provides stability, efficiency, and guidance to the chain that cuts and the motor that drives the chain. This 8-inch replacement bar for pole pruners features solid and durable steel construction. It will make sure equipment cuts quickly and smoothly while delivering maximum efficiency. A worn guide bar would result in inaccurate and inefficient cutting and logging. A bar may worn-out if cutting takes longer than with a sharp chain. A replacement may also be needed when the bar shows narrow tails, when the inside rails are worn, and when the groove turns to a loose V shape. To extend the life of the bar, ensure that the chain stays oiled while in use and that the bar is flipped upside down each time the chain is sharpened. This genuine OEM replacement bar is meant for use on a pole pruner or pole saw produced by Poulan or Poulan Pro. It is sold individually.

This is a bar bolt used with several types of lawn and garden equipment. It is used to secure the bar to the housing of the unit. The metal bolt is made with durable components but corrosion, damage, or wear and tear can necessitate replacement. The bar bolt can also become stripped or fall apart and create issues with other components staying together.If the bar bolt appears to be damaged, has been lost, or is broken, it needs to be replaced. The replacement process will require a wrench since the bolt is designed with a hex head. Before making the replacement, make sure the equipment has been turned off and placed on a stable surface. Wearing work gloves, remove the old bar bolt before placing the new replacement component.This is a genuine OEM replacement part that has been sourced directly from the manufacturer. It is sold as an individual bolt. The bar bolt is designed to be used with string trimmers, pole prunes, and chainsaws manufactured by Poulan, Poulan Pro, Husqvarna, and Craftsman.

This replacement part is a hex nut. This is a genuine replacement part made by Husqvarna. Hex nuts are small but important to the overall workings of different types of machinery. These parts work with other small pieces like screws and washers to ensure that all parts of the machine are in place and secure.A new hex nut might be needed if the current one is missing or damaged. This can be caused by normal wear and tear with years of extended use or a single incident. It is not uncommon that hex nuts experience large amounts of friction over time and can become worn down after a while. Refer to the owner's manual for specific directions on how to replace this part.This hex nut is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This screw is a genuine MTD part, sold individually. This screw can be used as a replacement part in string trimmers, edgers, chainsaws, and pole pruners.The screw in a small engine outdoor appliance might eventually have to be replaced in the case that the screw is lost, misplaced, or damaged from general wear and tear with long-term use. If the screw is lost or misplaced and its absence is noted by the operator, the screw should be replaced by this genuine OEM replacement part as soon as possible. If the screw is dented, cracked, punctured, or otherwise damaged, it should be replaced by this genuine OEM replacement part.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: MTD, Craftsman, Husqvarna, Weed Eater, Poulan, and Poulan Pro.

This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Screws are small yet very important to the overall operations of many different machines and appliances. Screws are able to hold other parts in place and secure so that everything can operate smoothly. A new screw might be needed if the user notices that the current ones are damaged or missing. It is possible that screws become stripped or lodged over time and must be replaced. The repair should be fairly easy, only requiring a screwdriver or pliers if the previous screw is stuck. Be sure the engine is completely powered down before starting a repair. This screw is sold individually. Be sure to purchase the correct amount as many appliances require more than one. This is a genuine OEM replacement part sourced directly from the manufacturer.

This genuine Husqvarna replacement part is an oiler for use with pruners and chainsaws. It is also known as an oil assembly or oil pump. Proper lubrication is essential for the safe and reliable use of a pruner or chainsaw. The oiler is used to provide oil to lubricate the sprocket and chain of the equipment.The sprocket or chain may become worn out or damaged if not properly lubricated, requiring a replacement. Proper oiling of these parts can extend the life of the pruner or chainsaw. Remember to check the sprocket and chain periodically to see if they are properly lubricated. Prior to working with this part, please refer to the original product manual for a full list of included parts and installation instructions. Additional tools may be required for installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality durable metal. This part is compatible with a variety of Husqvarna, Craftsman, Weed Eater, and Poulan pruners and chainsaws.

This replacement oil tank for a pole pruner or chainsaw is an authentic OEM replacement part. The inner workings of an engine consist of many moving parts. These parts are mostly made of metal and they thrash about against each other to produce and transfer energy. Engines use oil to lubricate these parts so that they do not rub and create friction as this would cause the engine to overheat. This oil tank lets operators quickly top up their engines with oil without having to take apart the inner mechanics. Oil tanks are made of durable reinforced plastic but it is still possible to bang, dent, or even puncture them. Should this happen, oil will leak from the tank and the engine will be starved of lubrication. For safety purposes, it is important to immediately replace a broken oil tank. To do so, use a wrench to remove the old tank and install the new part with the same bolts. This oil tank is compatible with Poulan and some Husqvarna appliances, and as a high-quality replacement part, it comes sourced from its original manufacturer. This part includes an oil tank and oil tank cap but it does not include an oil line.

This is a genuine replacement oil filter screen that is made for use in select models of chainsaws. This oil filter is made of durable metal and looks like a spring, designed to hold the paper-like filter that catches the debris before it gets into the engine. This oil filter is exposed to a lot of dirt and debris buildup which is why it should be cleaned or replaced as part of routine maintenance. However, replacing the oil filter holder and housing may not need to be done as frequently. Inspect all parts during maintenance for proper operation. If the oil filter becomes damaged or clogged, it will need replaced. This is a genuine OEM oil filter that is manufactured by Craftsman and designed for use in select models of chainsaws from the brand, as well as select units from Poulan, Husqvarna, and Snapper. The oil filter is sold as a single part and does not include hardware or additional components. Be sure to allow the engine to cool entirely before performing repairs and wear gloves to protect the hands. Because the oil filter is a common replacement, some people will keep an extra on hand in case of emergencies.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This is a genuine replacement oil filter screen that is made for use in select models of chainsaws. This oil filter is made of durable metal and looks like a spring, designed to hold the paper-like filter that catches the debris before it gets into the engine. This oil filter is exposed to a lot of dirt and debris buildup which is why it should be cleaned or replaced as part of routine maintenance. However, replacing the oil filter holder and housing may not need to be done as frequently. Inspect all parts during maintenance for proper operation. If the oil filter becomes damaged or clogged, it will need replaced. This is a genuine OEM oil filter that is manufactured by Craftsman and designed for use in select models of chainsaws from the brand, as well as select units from Poulan, Husqvarna, and Snapper. The oil filter is sold as a single part and does not include hardware or additional components. Be sure to allow the engine to cool entirely before performing repairs and wear gloves to protect the hands. Because the oil filter is a common replacement, some people will keep an extra on hand in case of emergencies.

This chainsaw bar adjuster is a genuine replacement tool that can be used with select models of chainsaws. The purpose of the bar adjuster is to make it easy to adjust the chain bar to tighten the chain. The angular design of this tool makes it easy to tighten and loosen the bar to create the ideal tension in the chain. This bar is made of durable metal but it can still become worn, bent, or otherwise damaged with regular use. A new bar wrench will ensure that the chainsaw can always be adjusted as needed. This genuine OEM bar adjuster is manufactured by Husqvarna. It is designed as an exact replacement for the original tool and it is compatible with Craftsman, Poulan, Snapper, and Husqvarna chainsaws. There are over 150 models that can use this chainsaw bar wrench, which is made of premium durable metal material and sold as an individual unit. Never attempt to adjust a chainsaw bar or blade with anything but the right tool. This genuine part is a replacement for bar adjusters that have been lost, as well, and should be stored carefully out of the elements when not in use.