Parts for Mtd Pro 31AE6LFH718 / 2005: Chute Assembly Parts

Cleanout tool for snow throwers. Installs on the discharge chute housing. Replace if the original tool is lost, broken, or missing from your machine.

Snow not blowing out of your snowblower? A damaged impeller assembly prevents snow from discharging through the chute. Direct replacement part.

Hex screw for lawn mowers and garden equipment. Replaces cracked, stripped, or missing hex head bolts. Six-sided head fastens metal or wood components.

A carriage bolt is a type of fastener. It features a smooth rounded head and a square domed top. It has threading, which leads to up to the square shoulder. The purpose of its square is to prevent the bolt from spinning. Once the carriage bolt is inserted through the hole, using a nut and washer can provide additional security. Carriage bolts can corrode and loosen over time. Since it doesn't have a slotted head, a socket wrench is needed when replacing. This bolt carriage replacement is compatible with wood chippers, tillers, string trimmers, lawnmowers, and edgers. It is a genuine MTD product that measures 5/16x.075. It has a smooth rounded head and square shoulder underneath it. This carriage bolt is sold individually.

Carriage bolt for lawn mowers and outdoor power equipment. Fastens components together with a nut. Replace if lost, stripped, or damaged during repair.

Self-tapping screw for lawn mowers and garden equipment. Secures metal, wood, and plastic parts. Replace if stripped, missing, or corroded.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

This is a flanged lock nut. It’s designed to apply tension, typically on a joint that needs to have a certain amount of flex. As such, it’s mostly used on snowblower chutes and lawnmower handles. They can remain in place, but with a forgiving connection that can take a beating. The nut size is 3/8, with a thread size of 16. A lock nut will generally last for many years. However, the silicone ring inside will wear down if it’s frequently tightened and loosened. It needs to be replaced when it will no longer reliably remain in place. Generally, this begins as a symptom of slight slippage and worsens as time goes on. Thankfully, whether it’s being used on a snowblower or a lawnmower, this nut is generally straightforward to access. Simply unscrew the old nut, then screw the new nut on until it’s nice and tight. Our flanged lock nuts are genuine OEM MTD nuts, and they are sold individually.

Secures moving parts and linkages on tractors and outdoor equipment. Replace if bent, broken, or missing to prevent parts from detaching during operation.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

Push-on nut for lawn tractors and snow throwers. Secures components in place. Replace if missing, damaged, or no longer holding firmly during operation.

Chute adapter connects the auger housing to the lower chute on your snowblower. Replace if cracked, broken, or damaged to restore proper snow direction.

Extension spring for snow blower idler pulley assemblies. Mounts to housing to maintain proper tension in belt drive system. Replace if stretched, broken, or missing.

Wave washer for lawn tractors and snow blowers. Replace if washer is missing, flattened, or worn to restore proper spacing and tension in assembly.

Tool mounting bar clip for gas snowblowers. Secures tool holder bar to the frame. Replace if clip is cracked, bent, or missing to properly mount tools.

Shoulder screws are a type of fastener used in many types of lawn and garden equipment. Also called stripper bolts or shoulder bolts, they have a head, threads, and an unthreaded shoulder. These screws are used in areas where items need to be held together in a specific location. They can be used with bearings, bushings, and machinery support. Shoulder screws are made of durable metal but can still experience breakage or damage. When this occurs, the screws will need to be replaced. A wrench can be used to remove the damaged shoulder screw. First, visually inspect the shoulder screw to look for damage or corrosion. Sometimes, the screw will be entirely broken. If any of these things are present, a wrench can be used to remove the old shoulder screw. The same tool can be used to insert a new shoulder screw before reassembling the equipment.Designed for lawnmowers, lawn tractors, tillers, leaf blowers, chainsaws, log splitters, chipper shredders, and snowblowers, this part is compatible with items from Yard Machines, MTD, Cub Cadet, Craftsman, Toro, Huskee, Montgomery Wards, Yard-Man, MasterCut, and Troy-Bilt. The locknut is sold separately.

This replacement part is a screw, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This specific screw is typically found in snowblowers and is responsible for keeping different parts in place and secure. A new screw might be needed if any current ones are missing or damaged. After years of normal wear and tear screws can become stripped overtime and might need replacing. To replace this part the user should only need a common household screwdriver and possibly pliers if the screws have become wedged in an area. Overall this should be a fairly simple repair depending on the amount of new screws needed.This is a genuine OEM replacement part sourced directly from the manufacturer and is sold individually. Be sure the correct amount of screws are purchased as many machines require more than one to operate successfully.

Replaces broken or sheared auger shear pin on snow throwers. This safety part snaps when auger hits obstacles to protect engine from damage.

Auger bearing flange connects to the bearing to reduce friction during operation. Replace if worn or damaged to restore smooth auger rotation. Verify fit.

Auger bearing for snow throwers supports rotating shaft movement. Replace if you hear grinding noise or auger doesn't spin smoothly. Verify fit with model.

This part is an idler pulley. The idler pulley applies tension to and guides the engine drive belt. A wrench set is needed to perform any repair involving the idler pulley part.The idler pulley can become worn over time with normal use. Wear to the pulley can cause the belt to slip. Signs that the idler pulley needs to be replaced include squealing noises coming from the equipment, the engine stalling, or overheating. The idler pulley is an essential component and it is important to replace this part if it becomes worn, broken, or damaged in any way.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. This idler pulley is compatible with lawn tractors and snowblowers manufactured by MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Husky.

Snow thrower bearing reduces friction for smooth operation. Replace if you hear grinding or unusual noises during use. Confirm fit with your model number.

Snowblower won't throw snow or clears unevenly? This left hand auger assembly collects and feeds snow to the impeller. Moderate DIY repair.

Fix your snowblower that won't clear snow on one side with this right-hand auger assembly. Moderately difficult repair for improved snow removal.

Secures pins and shafts on lawn tractors and riding mowers. Replace if bent, missing, or worn. Bow-tie design inserts through pre-drilled holes.

Spacer for snow throwers and small engines. Fits over bolts or screws to maintain proper spacing between components. Replace if missing or damaged.

Flat washer for lawn mowers and tractors. Spreads load from bolts and screws to prevent damage. Replace if worn, cracked, or missing hardware.

Replaces broken or sheared auger shear pin on snow throwers. This safety part snaps when auger hits obstacles to protect engine from damage.

Flange bushing for snow throwers and lawn equipment. Replace when worn to maintain smooth operation and prevent part damage. Verify fit with your model.

Replace your snowblower's bearing housing to restore smooth auger operation and prevent shaft damage. Verify fit with your model number before ordering.

Carriage bolt for snowblower attachments and snow throwers. Secures components and panels. Replace if bolt is stripped, rusted, or missing.

Upper chute assembly for gas snow throwers. Directs snow discharge from the auger housing. Replace if cracked, damaged, or missing. Installs on top.

Fix a chute that won't rotate properly with this snow thrower chute flange keeper latch. Secures the flange to ensure smooth chute rotation. Easy DIY fix.

Lower chute assembly for snowblowers. Directs snow discharge from the impeller. Replace if cracked, broken, or missing for proper snow routing.

The replacement flat washer here is a part commonly found on many types of small engines, including those in lawn and garden equipment. The washer can be used on various parts of the engine depending on the make and model. The washer can help to spread the pressure of the connection over a wider surface area. This will help reduce damage to the machine at the connection point. The washers are made from metal and there may be a need to replace them. If they have become corroded, bent, or lost, they should be replaced right away. Owners should keep in mind what with some models, the washers will be secured with the use of a push pin. The push pins are sold separately. This is an authentic OEM replacement flat washer that is sold individually. The washer can be used on many types of equipment including lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s primary purpose is to protect wires and cables from damage as they pass through a channel. As such, the material is fairly durable and does not need to be replaced under ordinary circumstances. That said, there are some situations in which it can become damaged. For one thing, it’s easy to damage while repairing the wires or cables that run through the bushing. If the bushing does need to be replaced, it requires disconnecting any cables or wires that run through the bushing. Pop out the old bushing with a rubber mallet, install the new bushing the same way, reconnect the wires, and the repair is complete. This is an OEM part sourced directly from MTD, and it is sold individually. It was initially used on snowblowers but has also been used on lawnmowers and lawn tractors.

Replacement chute crank bracket for snow blowers. Holds and positions the chute at the proper angle. Replace if cracked, broken, or missing.

Replacement skid shoe for snow blowers. Mounts to the side of the auger housing to protect surfaces and control clearing height. Replace when worn.

If your snow blower won't move or gears slip, the transmission housing assembly may be damaged. This part houses critical drive components.

Snowblower won't move or loses power? This transmission reduction gear housing restores drive function. Moderate DIY repair for common drive issues.

Seals internal engine components to prevent oil leaks. Replace when you notice oil seeping around the crankshaft or engine housing. Confirm fit with your model.

Flange bearing for snow blower auger and drive systems. Replace if you notice wobbling, grinding noise, or rough rotation. Verify fit with your model number.

This self-tapping screw is used to attach various parts to the engine housing of medium sized gasoline powered engines, in particular yard tools such as tillers, snow blowers, yard tractors, riding mowers, power vacuums, shredders, and chippers. It is used in over 150 different gasoline powered engines. Screws such as these are used particularly when a device is going to receive a great amount of vibration and stress while the engine is running and rotating tools are engaged. Such devices sustain a great deal of wear over time and the parts subject to replacement will eventually fail and need to be replaced. In such cases, it is wisest to replace the attaching hardware such as housing screws as well, because it is a self-tapping screw. Screws of this type are designed to forge a tight bond between the metal pieces they are securing together, but once loosened, they should ideally be replaced with new hardware. Make sure when replacing these screws to use genuine OEM parts like these screws. These replacement parts are manufactured to be identical to the original pieces. This hex screw is compatible with the following brands: MasterCut, Yard-Man, Yard Machine, Montgomery Wards, MTC, Murray, Bolens, Craftsman, Turf King, Troy Bilt, Cub Cadet, Huskee, Toro, and Ryobi.

This is a hi-pro key, or high profile key. This part is most commonly used to lock pulleys and gears into transmission shafts. Replacing a damaged, broken or lost hi-pro key is simple, requiring only a set of pliers to complete.This hi-pro key is an authentic OEM component sourced directly from the manufacturer. It is sold as an individual unit. It is compatible with lawn tractors and snowblowers from MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Cub Cadet, and Huskee. It is made of high-quality, durable metal materials.

Dowel pin fastener for gas snowblowers. Secures components in place during operation. Replace if missing, bent, or sheared to restore proper assembly.

Worm shaft for snowblower auger drive system. Replaces worn, stripped, or broken worm shafts. Installs in gearbox to transfer power to auger assembly.

This thrust collar is a structural component that maintains proper spacing in the auger or drive system. Replace if cracked, worn, or missing to restore assembly.

This grease plug is a genuine OEM replacement part sourced directly from the manufacturer. It is found on snowblowers and other outdoor yard machines on the gearcase assembly, which houses the auger gear. The grease plug seals the oil port on the gearbox. This keeps lubrication inside the gearbox and is the access point for adding more when needed. If this plug is lost, the gearbox's oil could leak out, and contaminants could get into the gearbox.Lubricate the contents of the gearbox before installing the new grease plug. Locate and remove the two screws on the side to drain the gearbox. Install the grease plug in the bottom. Refill the oil using the vent hole. Continue filling until oil is coming out the top side screw. Close everything back up, and the machine is ready for use. To prepare the equipment for long storage, remove the grease plug and check the oil level. If it is not to the top, add more lubricant before sealing the grease plug.This grease plug is made of durable black molded plastic and is sold as an individual unit. It is compatible with snowblowers and snow throwers manufactured by Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, Yard-Man, Cub Cadet, and Husky.

Oil seal prevents leaks on snowblower worm shaft and bearing flange. Replace when you notice oil leaking from the engine area. Verify fit with your model.

Flat washer for lawn tractors and garden equipment. Distributes load under bolt heads and prevents surface damage. Replace if worn or missing.

Flat washer for lawn and garden equipment. Spreads load under bolts and screws to secure components. Replace if cracked, worn, or missing.

Flange bearing supports rotating shafts in snow blower drive systems. Replace if worn, noisy, or causing wobble. Verify fit with your model number.

Replaces broken or frayed clutch control cable on gas snowblowers. Connects handle control to engagement mechanism. Order new cable if damaged or worn.

Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.