Columbia Parts

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This is a pawl that can serve as a replacement for some mower models, as well as chippers and shredders. The pawl attaches to the ratchet pawl plate. The pawl is essential for starting the engine. When the starter turns, the pawl is forced outward and locks onto the flywheel, allowing the engine to start. When the starter rope is let go, the springs pull back the ratchet pawls. If there is damage to the pawl, the engine will not start.The piece is made from durable metal, and it is built to last. However, it can start to wear down over time. Additionally, there is the potential that it could corrode. If there are issues with the pawl, replace them as soon as possible to ensure their machine continues to operate properly.This pawl can work with select models from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. The piece is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

This replacement part is a push rod kit. This is a genuine replacement part made by MTD. This part is commonly found in certain types of lawn mowers and assists the user in maneuvering the machine in the desired direction.A new push rod kit might be needed if the current one is damaged in any way. This might include being bent, dented, cracked, or chipped. If this is the case, the rod might not be able to function properly and should be replaced so that the appliance can return to working order. Be sure the engine is powered down before attempting to replace or repair this part in any way. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This replacement part is a stud assembly. This is a genuine replacement part made by MTD. This stud assembly is responsible for keeping the muffler in place and secure so that the lawn mower may operate smoothly and according to the user's preferences. A new stud assembly might be needed if the current one is misplaced or damaged. It is not unusual for the studs to become stripped over time and need to be replaced. If the muffler is no longer able to stay in place, it can be due to the studs and should be looked into. Be sure the engine is completely turned off before attempting to replace this part. This stud assembly is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This is a gasket kit that contains a variety of parts utilized in many kinds of lawn and garden equipment. Each of the parts in the kit is created to seal two surfaces inside the equipment. The components in the kit include a carburetor insulator plate, a carburetor gasket, a carburetor insulator gasket, two carburetor gasket plates, an exhaust pipe gasket, a valve cover gasket, and an oil drain plug washer. If a lawn and garden tool is leaking fuel, air, or oil, these parts can be used to replace the faulty component.A socket wrench or small monkey wrench and a screwdriver will be needed to replace any parts included with the gasket kit. Make sure the lawn equipment is on a flat surface and the spark plug wire has been disconnected. Disassemble any needed components to reach the gasket or other part that needs to be replaced. Put in the new component and reassemble before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual kit. The external gasket kit is designed to be used with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This throttle return spring is a genuine MTD part, sold individually. This throttle return spring can be used as a replacement part in a snowblower or a log splitter. The purpose of a throttle return spring for one of these small engine outdoor appliances is to facilitate the opening and closing of the throttle in conjunction with the operator releasing or engaging the gas pedal of the appliance.If the throttle return spring can no longer facilitate the opening and closing of the throttle, the throttle return spring should be removed and replaced by this genuine OEM replacement part before the log splitter or snowblower is used again.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This throttle return spring is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, and Yard Man.

This part is a replacement oil seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broken, worn, or defective oil seal in outdoor power equipment. The oil seal helps to prevent oil from leaking from the engine sump. If the user notices an oil leak, this seal may need to be replaced. When working on or near an engine, it is important to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this oil seal, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this oil seal is suitable for use on several different models of outdoor power equipment manufactured by MTD, Craftsman, and other brands. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This is a high-quality connecting rod assembly that is used in many types of lawn and garden equipment from several manufacturers. It has a metal rod that connects to the crankshaft and piston. The purpose of the connecting rod is to allow pressure and combustion to rotate the engine's output. If this part is damaged or broken, the garden equipment may not work or may not have the desired level of performance. If this happens, the connecting rod assembly should be replaced.A basic set of tools and work gloves will be needed to replace the connecting rod assembly. First, turn off the tool with the damaged rod and put it on a level and sturdy surface. The spark plug wire should be disconnected to prevent the engine from turning on. Access the rod and replace it with the new part before use.The connecting rod assembly is sold as an individual part. It is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is made to be compatible with lawnmowers, wood chippers, snowblowers, log splitters, tillers, and leaf blowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines.