Parts for Maytag MVWX655DW0: 03 - Console And Water Inlet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This electronic control panel is the user interface for select electric ranges and ovens, restoring access to the timer, bake/broil settings, and display. It replaces a cracked, unresponsive, or non-displaying front control surface to regain normal oven control. What it does:

• Houses the touchpad/buttons and display to send commands to the oven control board
• Replaces faded, cracked, or damaged front control surfaces and keypads
• Helps address unresponsive buttons, missing numbers/segments in the display, or intermittent control behavior
• Interfaces with the main electronic control so bake, broil, timers, and clock functions operate properly

• Disconnect power to the appliance before starting any service to avoid shock hazard
• Access typically requires removing the oven/range top or back panel
• Handle glass/display areas carefully to avoid scratches or damage during installation

The Knob Spring Clip is an OEM part for Whirlpool appliances, specifically designed for use in washers and dryers. This small but essential component is responsible for securing the control knob to the control panel, ensuring that the knob stays firmly in place during operation.

Common causes of a bad spring clip include frequent use, accidental impacts, or wear and tear over time. A faulty spring clip can result in the control knob becoming loose or falling off, making it difficult to operate the appliance.

Symptoms of a bad knob spring clip include:

• The control knob is loose or wobbly
• The control knob falls off easily
• Difficulty in turning or setting the control knob
• The appliance not responding correctly to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Cold Water Inlet Valve is an OEM replacement part specific to Whirlpool washing machines. It is responsible for allowing cold water to enter the wash tub during specific cycles. 

Symptoms of a bad cold water inlet valve include:

• Inability to select cold water cycles 
• No cold water entering the tub even when valve is called for
• Water leaks around the valve area
• High water usage as the valve fails to close fully

Causes can be mineral buildup over time restricting water flow, or mechanical failure of internal components like seals or diaphragms. Replacing the inlet valve prevents further issues like inconsistent fill levels due to too much or too little water entering the tub.

This OEM Whirlpool replacement valve provides a tight seal and reliable water control. It restores cold water functions and is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hot Water Inlet Valve is an OEM part for Whirlpool washing machines. This part controls the flow of hot water into the washing machine during the wash cycle, ensuring that the machine receives the correct amount of hot water for optimal cleaning performance.

Common causes of a bad inlet valve include wear and tear over time, clogging from mineral deposits or debris, and electrical failures that prevent the valve from opening or closing properly.

Symptoms of a bad Hot Water Inlet Valve include:

• The washing machine not filling with hot water
• Water leaking from the valve or connections
• The machine filling slowly or not at all
• Error codes related to water flow issues

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

• Loose console assembly that is not securely fastened  
• Misaligned or dangling controls that do not sit flush
• Dislodged console at risk of detaching from housing
• Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This control board is for a washing machine. Control boards monitor and manage all the functions of the washing machine. Without the board, users could not fill the drum with water, change wash cycles, adjust water temperature, or empty the drum when washing was done. Over time, electronic circuit boards can develop internal faults that compromise operation. When this happens, replacement is the only option.Replacing the control board is simple. First, disconnect the power. Next, move the washer out to access the back. Remove the upper rear panel. The control board should be visible now. Disconnect the wiring harness and remove the mounting screw. Install the new board, connect the wiring harness carefully, and replace the access panel once more. Always wear gloves when working on household appliances.This genuine OEM part is sold separately and fits Maytag washing machines.

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

• Fastens panels, brackets, or internal parts to the cabinet/frame
• Helps maintain alignment to reduce vibration and rattling
• Replaces lost, stripped, or corroded screws
• Common symptoms: loose panels/trim, rattles, or a screw that won't tighten

• Disconnect power; shut off water or gas if applicable
• Match thread and length to the original; replace one at a time to keep alignment
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten, especially into plastic or thin sheet metal

This cycle selector switch lets you choose appliance cycles from the control panel so your washer or dryer runs the setting you pick. Replaces a worn or unresponsive cycle control to restore reliable cycle selection. What it does:

• Selects the user-chosen wash or dry cycle from the control panel
• Sends the selected cycle signal to the appliance control/timer
• Commonly replaces units that feel loose, fail to click, or do not change cycles reliably
• Helps resolve symptoms like unresponsive cycle changes or intermittent cycle selection

• One cycle selector switch

• Disconnect power (unplug or turn off breaker) before starting any repair
• Replacement typically requires removing the control panel or console; keep fasteners organized
• Handle with care to avoid damage to wiring harness or control board connections

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

This replacement power cord restores the appliance's primary electrical connection so it can receive power safely. Use it when the original cord is damaged, frayed, or no longer providing a reliable connection. What it does:

• Provides the main incoming electrical connection from the wall outlet to the appliance
• Replaces cords with visible damage, exposed wiring, or intermittent power delivery
• Can resolve no-power or power-interruption symptoms when the cord is the fault
• Ensures a secure connection when installed with the correct strain relief and terminal fastening

• Disconnect the appliance from power before attempting any service.
• Remove access panels as needed to reach the cord terminals; note wire locations before disconnecting.
• Secure cord with the appliance's strain relief and tighten terminal connections per the factory layout.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

• Loose or detached rear bulkhead allowing side-to-side play
• Excessive noise and shaking felt through the surrounding walls   
• Development of micro-cracks around screw holes over time
• Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Knob is an OEM replacement part for Whirlpool dryers. This part is what you turn to select different drying cycles, temperatures, or settings on your machine. The knob is designed to fit onto the dryer's control panel and is used for manual operation of the appliance.

Symptoms of a bad Knob include:

• Difficulty in turning or setting the knob
• The knob slipping or coming off the control panel
• Inability to select or change cycles
• Visible cracks or damage to the knob itself
• Causes for a deteriorating knob can be frequent use, which may lead to wear and tear, or accidental damage from impact or mishandling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement control knob restores smooth, reliable turning on your appliance's control panel so you can select settings accurately again. It's designed to slide onto the control shaft and provide a secure, easy-grip interface. What it does

• Attaches to the control shaft to let you select settings
• Replaces cracked, stripped, or missing knobs
• Helps ensure the switch or valve engages properly when turned
• Improves grip and appearance on the front panel

• 1 control knob

• Disconnect power; if servicing a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft—do not pry against the panel
• Align the new knob with the shaft flats/splines and press straight on without forcing
• Test operation to ensure the knob fully engages the control

This cycle selector switch controls the washer's cycle selection, letting the timer and controls know which wash program to run. Replacing a worn switch restores reliable cycle selection and predictable machine behavior. What it does

• Selects the active wash cycle and sends the selection signal to the timer/control assembly
• Ensures the washer follows the chosen program (wash, rinse, spin) in the correct sequence
• Common symptoms of a failing switch: washer won't change cycles, cycle knob feels loose or spins freely, machine starts the wrong cycle, or no response when selecting a cycle
• Matches original function and mounting for direct replacement when this exact part is specified

• One cycle selector switch

• Disconnect power (unplug or switch off breaker) before starting any work
• Access typically requires removing the console or control panel—keep track of screws and fasteners
• Note wiring locations or take a photo before disconnecting connectors to ensure correct reassembly

The Cycle Control Switch is an OEM part for Whirlpool washing machines. It acts as the selector switch for different wash cycles like normal, heavy duty, delicate, and spin options. 

Causes of a bad Cycle Control Switch often include general wear and tear over years of use. Harsh chemical or liquid exposure can degrade electronic circuits inside the switch. Physical damage from impact may also cause components to malfunction.

Symptoms of a bad Cycle Control Switch include:

• Inability to select desired cycles  
• Washer failing to start or operating improperly
• Repeatedly defaulting to the same cycle despite input changes
• Unresponsive or intermittent switch movement between positions

This OEM replacement switch is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Dispenser Drawer is an OEM part for Whirlpool washing machines. It is responsible for holding and dispensing the appropriate amounts of detergent, fabric softener, or other laundry additives during the wash cycle.

Causes of a bad dispenser drawer can include clogging or buildup of residue, damage to the drawer or its components due to impact or excessive force, or malfunctioning mechanisms that control the dispensing process.

Symptoms of a bad dispenser drawer may include:

• Inadequate or improper dispensing of detergent or additives
• Leakage or spills from the dispenser area
• The drawer not opening or closing smoothly
• Visible cracks or damage to the drawer itself

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.