Parts for Ge CGS985SET6SS: Control Panel, Gas & Burner Parts

Converts your range from natural gas to liquid propane (LP) fuel. Includes orifices and components needed for fuel conversion. Replace when switching fuel types.

Replace a cracked, stripped, or missing range control knob. Restores reliable temperature and burner setting selection with secure, tactile control.

The Range Knob is an OEM part for GE electric and gas ranges. This control knob is responsible for selecting the surface burner or oven function.

Symptoms of a bad knob include: 

• Loose, wobbly or difficulty turning the knob
• Inaccurate or inconsistent burner or oven selection  
• Faded or damaged knob markings

Causes can be normal wear and tear from frequent use. Heat exposure over time may degrade electronic components or crack knob materials.

This GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Manifold panel for your range. Covers and protects the gas manifold assembly. Replace if cracked, damaged, or missing to restore appearance and safety.

Size: 8 - 32 inch.

This small cooktop bracket secures designated components beneath the cooktop surface, keeping them properly positioned and stable. Replace a damaged or missing bracket to restore alignment and reduce movement or rattling during use.

• Provides mounting support for specific under-top components, per model design
• Helps maintain proper alignment and stability of cooktop parts
• Replace when visibly bent, cracked, or corroded

• Disconnect power; for gas models, also shut off gas and allow the unit to cool
• Remove surface components as required (grates/caps/heads for gas; elements/panels for electric) to access under the top
• Lift or remove the cooktop as directed in your model's service information and secure the new bracket with existing hardware
• Reassemble, verify alignment, and for gas units check for leaks if any gas connections were disturbed

This circuit board mounting bracket secures an electronic board or module inside the appliance. It prevents movement, vibration damage, and wiring interference so the component stays correctly positioned for reliable operation.

• Mounts and supports a small circuit board or module within the chassis
• Maintains proper spacing and alignment to reduce chafing or electrical short risks
• Replace if bent, cracked, or missing tabs, or if it no longer holds the board securely
• Common signs include a loose/rattling board, visible bracket damage, or intermittent operation when the panel is bumped

• Disconnect power at the breaker; shut off gas supply if applicable
• Remove the necessary access panel(s) to reach the board and bracket; note orientation and wiring
• Transfer the board/module to the new bracket and reinstall using existing hardware
• Watch for sharp metal edges; route wires to avoid pinching and verify clearances before restoring power

If your range controls are unresponsive or buttons don't register, the switch harness may have failed. Connects control interfaces to the main module.

Secures the cooktop to the range frame, preventing shifting or rocking. Replace if your bracket is cracked, bent, worn, or missing for stable alignment.

Fix uneven burner flames or gas flow issues with this range manifold pipe assembly. Distributes gas evenly to cooktop burners for consistent heating.

Fix improper flames or weak ignition on your range burner with this LP orifice spud. Meters propane flow for correct flame size and safe operation.

Fixes weak or uneven flames on LP gas ranges. This orifice spud meters propane flow to the burner. Easy DIY install restores proper flame size.

Protective cover that slips over the gas valve shaft to shield valve components from spills, food debris, and moisture. Replace if cracked or missing.

Replacement mounting screw that secures the thermostat assembly to your range cabinet. Replace if stripped, missing, or damaged during repair work.

Natural gas orifice for range burners. Replaces lost or misplaced orifices when converting from LP to natural gas. Essential for proper gas flow.

Secures the burner valve assembly to your gas range. Replace this mounting screw if worn, missing, or stripped to restore proper valve alignment and support.

If your range burner has weak or uneven flames, this orifice holder secures and aligns the gas orifice for proper flow and stable combustion.

Fix a right-rear burner that won't ignite or has an uneven flame with this orifice holder. Secures the gas orifice in the burner head assembly.

Replace your range bake burner when oven won't heat, bakes unevenly, or takes too long to preheat. Moderate DIY repair with basic hand tools required.

Restores proper gas flow when burners won't light or flame is weak. This supply tube connects the valve to the burner for reliable ignition and heat.

Secures the igniter to the burner assembly in gas ranges and ovens. Replace if stripped, missing, or damaged during igniter replacement or repair.

Dual cavity elbow connector for ranges. Installs between dual oven cavities to route airflow. Replace if cracked, broken, or missing to restore proper fit.

Fix uneven browning or weak broiling with this oven broil burner. Restores high-temperature top-down cooking for proper searing and browning.

Fix uneven heating or gas flow issues with this range manifold pipe assembly. Distributes gas evenly to burners. Moderate difficulty repair.

Pilot indicator light mounts in the control panel and illuminates when a surface element or heating circuit is powered. Replace if burned out or stuck on.

This cover ignitor protects the oven or range ignitor assembly and helps keep the ignitor clear of drips and debris for reliable ignition. It's a simple replacement that restores the ignitor's protective shield. What it does

• Protects the ignitor element from spills, grease, and debris that can interfere with ignition
• Helps maintain consistent ignition by shielding the ignitor from direct contact
• Commonly used when the original cover is cracked, warped, or missing
• Can resolve ignition issues caused by physical damage or buildup on the ignitor area

• One cover ignitor

• Disconnect power (and gas supply on gas appliances) before starting any repair
• Handle the ignitor assembly carefully; avoid touching the ceramic or ignitor tip
• Use basic hand tools; ensure the cover seats properly without forcing or cracking it
• After installation, restore power/gas and test the burner or oven according to the appliance manual

Burner orifice spud regulates gas flow to the burner on your range or cooktop. Replace if missing, damaged, or when converting between LP and natural gas.

Weak or uneven flames on your gas range? A clogged or damaged orifice spud restricts gas flow to the burner. Simple replacement restores proper flame size.

Weak or uneven flames on LP gas? This range burner orifice spud meters propane flow for steady, consistent flames. Restores proper gas delivery.

LP gas orifice spud for converting gas range burners from natural gas to propane. Replace if missing, damaged, or switching fuel types on cooktop.

Burner won't shut off or has weak flame? This top burner valve controls gas flow to restore proper ignition and flame adjustment on your range.

Fix a burner that won't light or shut off completely with this gas range top burner valve. Controls gas flow to restore reliable ignition. DIY repair.

Fix burners that won't light, stay lit, or shut off completely with this gas control valve. Regulates flow to a single burner for steady flames and safe cooking.

Range won't heat evenly or burner flames are uneven? This gas valve tube connects dual valves to restore proper gas flow. Moderate DIY repair.

Fix uneven simmer heat or burner that won't stay on low with this range simmer burner tube dual valve. Moderate difficulty repair, typically 1 hour.

Delivers gas from the manifold to your range's top burner for reliable ignition and even flame. Replace when burners fail to light or heat unevenly. Verify fit with your model number.

Fixes frozen touchpad, unresponsive controls, or inaccurate oven temperatures. This control board manages all oven heating functions and display operations.

Oven not reaching set temperature or overheating by 10-20 degrees? This range thermostat monitors and regulates heat for consistent baking. 2-hour DIY repair.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Burners won't ignite or flame is weak? This gas valve controls fuel flow to your range burners. Restores reliable ignition and steady flame performance.

Fix an oven that won't heat or takes too long to reach temperature. This igniter glowbar opens the gas valve to ignite the burner. DIY-friendly repair.

The Oven Igniter is an OEM replacement part for GE ovens, designed to ignite the bake igniter to start the heating process. This part is responsible for creating the spark that ignites the gas, providing the heat needed to cook and bake food. Over time, the oven igniter can wear out or become damaged, which can prevent the oven from heating.

Symptoms of a bad Oven Igniter include:

• The oven not heating up at all.
• The oven taking longer than normal to heat.
• Gas smell in the oven due to gas being released without ignition.
• A clicking sound without the oven igniting.

Causes of a bad igniter can include normal wear and tear over time, exposure to excessive heat or moisture, or physical damage from impact or mishandling.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

IMPORTANT: The connector plug may need to be cut off and igniter wires connected to range wires using porcelain wire connectors.

Burner deflector guard for gas ranges. Installs around burner assembly to direct heat and protect components. Replace if cracked, warped, or missing.

This broil shield protects the oven interior above the broiler, helping direct heat and shielding the oven cavity from intense broiling temperatures for safer, more consistent broiling results. Durable metal construction resists warping. What it does:

• Shields the oven top and components from direct broiler heat to prevent damage and discoloration
• Helps maintain more even broiling by directing heat where food is placed
• Reduces the risk of flare-ups reaching wiring or insulation behind the oven liner
• Restores proper clearance between the burner and oven liner for safe operation

• One broil shield

• Disconnect power (and gas, if applicable) and allow the oven to cool completely before starting
• Remove oven racks and access the broiler area to unfasten and replace the shield using basic hand tools
• Inspect mounting tabs and surrounding liner; replace any damaged clips or screws as needed

Range control knob assembly for adjusting burner and oven temperature settings. Replace if knob is cracked, faded, loose, or missing from your range.

Replace a worn or broken control knob that won't turn or grip properly. Restores accurate temperature selection and smooth operation. Simple DIY fix.

Fix an overheating oven with this range limit thermostat. Stops heating when temperatures exceed safe limits. Straightforward repair for most DIYers.

This tangential blower is the oven cooling fan assembly that moves air across the cavity and control area to help regulate temperature and prevent overheating. It restores proper airflow for safer, more consistent oven operation. What it does:

• Circulates air across the oven cavity and control electronics to help dissipate heat
• Prevents control board and components from overheating during use
• Reduces hot spots and helps maintain more even cooking temperatures
• Often linked to symptoms like loud or unusual fan noise, the fan not spinning, or oven components running hotter than normal

• One tangential blower assembly

• Disconnect power to the appliance before starting any repair
• Handle carefully; fan blades and sheet-metal openings can be sharp
• Verify fan rotation direction and mounting orientation before final reassembly

Decorative trim skirt that fits around range control knobs on the front panel. Replace if cracked, disintegrating, melted, or missing for a clean look.

Replacement touch pad glass and control board assembly for your range. Restores the control surface when the original is cracked, unresponsive, or damaged.

Flow deviator guard for ranges. Shields and directs airflow within the appliance. Replace if cracked, broken, or missing to restore proper assembly.

Replace your range's RF filter harness to restore proper electromagnetic interference suppression. Essential when experiencing radio frequency issues. Verify fit with your model number before ordering.

This dual water inlet valve controls water flow to the refrigerator's dispenser and ice maker, restoring normal water delivery when the original valve fails. Reliable replacement for disrupted water supply or intermittent dispensing. What it does:

• Directs water to the icemaker and dispenser via two separate inlet ports/solenoids
• Stops water flow when valves fail, causing no water or no ice production
• Can cause continuous water flow or leaks if a valve sticks
• Restores normal dispensing and ice-making when replaced

• Disconnect power and shut off the water supply before starting any repair
• Replace with matching orientation and secure mounting to avoid kinks in supply lines
• Verify connections and test for leaks after restoring power and water

Fix gas smell when range is off with this safety valve lockout clip. Secures gas valve actuator to prevent unintended movement. Simple DIY repair.