Parts for Electrolux EWFLW65IMB0: 03 - Control Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Mounting bracket for washer and laundry center models. Secures components in place during operation. Replace if cracked, bent, or broken to restore stability.

Control panel button for washers and dryers. Replaces worn, cracked, or missing buttons on your appliance's control interface. Restores panel.

This replacement lens covers and protects a refrigerator control-panel or dispenser light, restoring clear illumination and preventing debris from contacting the lamp. It's a simple cosmetic and protective piece that helps controls remain visible. What it does:

• Protects the control-panel or dispenser light from dust, spills and impact
• Helps focus and diffuse the panel or dispenser light for even visibility
• Replaces cracked, cloudy or missing lenses that make controls look worn or lights appear dim
• Restores a finished appearance to the control area

• Disconnect power to the appliance before starting any work.
• Handle the lens carefully to avoid scratches; install using existing clips or fasteners.
• If clips or mounting hardware are damaged, replace them with compatible parts.

Replace a worn, broken, or missing control panel button on your dryer. This push-style button cap restores access to appliance settings and functions.

This push control button replaces a worn, broken or unresponsive button on the appliance control panel to restore user input and tactile feedback. Easy-to-replace part that returns normal button operation without replacing the entire panel. What it does

• Serves as the user-actuated push button on the appliance control or selector panel.
• Restores tactile feel and reliable electrical contact for the affected control.
• Commonly used when a button is cracked, stuck, loose, or no longer registers presses.
• Helps resolve intermittent or non-responsive control inputs tied to a failed button.

• One replacement push button.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Remove the control panel or bezel as required to access and replace the button; use proper tools and avoid prying on surrounding plastic.
• Handle internal components carefully to avoid damaging flat cables, switches, or circuit boards.

This is a replacement push button that fits on the appliance control panel and restores tactile control for a single function. It provides a simple, direct way to replace a worn, loose, or missing button so controls are usable again. What it does

• Replaces a damaged, cracked, or missing control panel push button
• Restores a firm tactile surface for reliable pressing of a single function
• Helps stop intermittent or unregistered button presses caused by wear
• Keeps the control panel looking complete and prevents accidental contact with underlying switches

• One push button

• Disconnect power to the appliance before any service to avoid shock or injury
• Typically snaps into the front of the control panel or slides onto a stem; keep track of orientation
• If access requires removing the control panel, keep screws and small parts organized for reassembly

Fix washer display issues, water level problems, or cycle failures with this electronic control board. Manages wash cycles and system functions.

Fix a washer that won't fill, overfills, or shows E35 error code with this water level pressure switch. Moderate DIY repair takes about 1-2 hours.

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

Fix a washer that won't start, shows error codes, or won't advance cycles. This electronic control board manages timing and power to components.

Replacement wire harness cable for your washer. Connects electrical components inside the machine. Needed when the original cable is damaged or worn.

Replacement drain hose for front-load washers. Connects the pump to the drain outlet. Replace if cracked, kinked, leaking, or damaged to restore drainage.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.

Secures and organizes wires inside your appliance. Replace if broken, loose, or missing to prevent wire damage. Verify fit with your model number.

The Water Dispenser Valve is an OEM part for Frigidaire washing machines. This valve controls the flow of water into the washing machine during the wash and rinse cycles. It ensures that the correct amount of water enters the drum, contributing to efficient and effective cleaning.

Causes of a bad water dispenser valve can include mineral deposits or debris clogging the valve, wear and tear over time, or electrical faults that affect the valve’s operation. 

Symptoms of a bad water dispenser valve include:

• No water entering the washer
• Insufficient water during cycles
• Leaks around the valve area
• Inconsistent water flow

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replaces cracked, worn, or leaking internal water hose in your washer. Restores watertight water flow between drum and dispenser components.

Secures hoses to fittings, preventing leaks in water and drain lines. Replace when connections loosen or leaks appear. Verify fit with your model number.

Rubber O-ring seal prevents water leaks at hose connections and fittings. Replace when worn or cracked to restore tight seal and stop dripping. Verify fit.

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

This replacement cup funnels water to the ice maker fill tube and helps ensure proper water delivery for consistent ice production. It restores the fill path and prevents water from pooling where it can cause poor ice formation or leaks. What it does

• Directs water into the ice maker fill tube so molds receive the correct amount
• Helps prevent water from spilling into the ice bin or cabinet area
• Addresses symptoms like slow/weak ice production, water pooling under the ice maker, or visible leaks during a fill cycle
• Works with the ice maker assembly to maintain consistent ice size and formation

• One replacement ice-maker fill cup

• Disconnect power and shut off the water supply before servicing the ice maker
• Remove the ice maker or access panel per your model's service instructions to reach and replace the cup
• Handle plastic parts gently to avoid cracking; ensure a snug fit to prevent leaks
• If symptoms persist after replacement, check the fill valve and ice maker assembly for proper operation

Fix a dispenser drawer that won't close, latch, or pop open properly. This assembly replaces broken latches and worn housings. Moderate DIY repair.

Replacement guide for your washer. Helps position and align internal components during operation. Replace if cracked, broken, or missing to restore stability.

Metal sheet-metal screw secures panels, brackets, and internal components. Replace when missing, stripped, or damaged to restore proper fit.

Seals hot and cold water connections to your washer's dispenser. Replace if you notice leaking at the inlet assembly. Confirm fit with your model number.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.