Parts for Ge ZET2PL1SS: 01 - Control Panel Parts

Control panel touch pad for your oven. Installs on the front console to operate cooking functions. Replace if cracked, unresponsive, or worn.

An encoder assembly mode is a feature included in wall ovens produced by several manufacturers. The purpose of this component is to assist with the signals sent to the control panel for various operations within the oven. Damages to the machine, misuse, or normal wear and tear can lead the encoder assembly mode to quit working. If it no longer is working, a replacement part is required.If an oven isn't responding correctly to the settings input into the control board, the encoder assembly mode could be the problem. Replacing the part is a simple repair. Always disconnect the appliance before starting the disassembly process. Wear gloves to protect hands. The component is located inside the control panel of the oven. The control panel must be taken apart to gain access to this part. Reconnect all wires securely before testing.This encoder assembly mode is an authentic OEM replacement part. It is sold as an individual unit. The encoder assembly mode component is made of high-quality, durable materials. The replacement part is compatible with several different models of ovens. It can be installed in appliances manufactured by General Electric, Hotpoint, and RCA.

Mounting bracket that secures the capacitor to your range frame. Replace if bent, broken, or missing to properly support and position the capacitor.

Control panel bushing cushions and supports your oven's control panel, preventing wear where it contacts the cabinet. Replace if cracked, broken, or missing.

Metal control knob assembly for oven temperature and function selection. Replaces cracked, broken, or missing knobs that prevent proper control adjustment.

Oven overheating or running loud? This cooling fan motor assembly circulates air to prevent overheating and reduce noise. Direct-fit replacement part.

Stainless steel timer knob for your oven control panel. Replaces cracked, broken, or missing knobs to restore function and appearance of your appliance.

Cooling fan screen filter for ovens and wall ovens. Replace if clogged with debris or damaged to maintain proper airflow. Verify fit with your model.

Small adhesive MG logo emblem for appliance exterior. Restores original appearance when factory badge is worn, faded, missing, or damaged. Easy peel-and-stick.

This flat washer (.250 inch inner diameter x .812 inch outer diameter) is a simple replacement part that helps distribute load from a fastener and protects mating surfaces for reliable appliance operation. What it does:

• Provides a stable bearing surface for screws, bolts or studs to reduce wear on parts
• Helps distribute clamping force to prevent pull-through or deformation of softer materials
• Reduces vibration and movement at the joint when installed correctly
• Missing or damaged washers can lead to loose fasteners, increased vibration or component misalignment

• Disconnect power and water before servicing the appliance
• Replace like-for-like: inner/outer diameters and thickness match the original washer
• Inspect mating hardware and surfaces for damage; replace corroded or deformed fasteners as needed
• Tighten fasteners evenly and avoid over-torquing to prevent washer or component damage

Oven won't heat or overheats? This high limit switch cuts power when temperatures exceed safe levels. Common fix for temperature control issues.

Protective cover that shields wiring at the top of your oven. Replace if cracked, broken, or missing to protect electrical connections and components.

Standoff bumper for ranges, ovens, and cooktops. Installs to provide spacing and support between components. Replace if cracked, broken, or missing.

Fix an oven that won't turn off or won't maintain temperature. This relay board controls power to bake and broil elements. Moderate DIY repair.

Oven clip secures components in place during operation. Replace if broken, loose, or missing to prevent rattling and ensure proper part alignment.

Protective housing cover for oven fan assembly. Installs over fan motor to shield internal components. Replace if cracked, broken, or missing.

The Wall Oven Capacitor Motor is an OEM part for GE wall ovens. Located inside the oven cavity, this motor is responsible for turning the convection fan which circulates hot air for even baking and roasting. 

Symptoms of a bad capacitor motor include:

• Inability to select convection bake or roast features 
• Uneven cooking results 
• Lack of air circulation inside the oven
• Strange noises coming from the fan/motor area
• The convection fan not turning on 

Causes of failure can be wear over time, damage from debris inside the oven, or occasional voltage fluctuations which can degrade motor components.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

ST10-16 X 7/16"

Oven vent mounting nut secures the vent cover assembly to your range or wall oven. Replace if nut is stripped, missing, or damaged during service.

This is a replacement screw that can be used with many different types of household appliances. Screws fasten various pieces of machines together. They can also help to reduce the amount of vibration in the machine. If a screw is missing or damaged, it could cause a machine to stop working properly, or to vibrate more than it should.The screws are made from metal and will typically last for a long time. However, the threads and other parts of the screw can wear down with use. The screws could also become lost when making other repairs to the appliance. Replacement of the screws is generally easy, but it will depend on where it is placed.This item can replace certain screws found in various models of ranges, ovens, dryers, and microwaves from General Electric, Hotpoint, Whirlpool, and Kenmore. This is a genuine OEM replacement part sourced from the manufacturer. It is sold individually. Owners may want to have several replacements on hand in case they need them.

Replacement screw for securing oven components, panels, and brackets. Restores tight mounting when original screws are missing, stripped, or lost.

Replacement mounting screw for securing panels, brackets, and trim on electric ranges and wall ovens. Needed when original fastener is stripped or missing.

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

Mounting screw secures range components and panels. Replace if screw is stripped, missing, or damaged during appliance repair or maintenance work.

Black. 8-18 AB HXW 3/8

This nut secures the control panel encoder shaft so the selector knob stays firmly in place and maintains reliable signal contact. A small but essential fastener for stable user control and consistent cycle selection. What it does:

• Secures the encoder/shaft to the control panel assembly to prevent wobble or loosening
• Helps keep the encoder's electrical contact aligned for accurate signal input
• Can resolve symptoms like a loose or spinning selector knob or intermittent control responses
• Designed for direct replacement of the original mounting nut for the encoder

• One nut encoder (quantity: 1)

• High-level task: remove control panel or console to access the encoder shaft; reassemble panels after replacement
• Use proper tools to avoid stripping the nut or damaging the encoder shaft
• Power off and unplug the appliance before beginning any work to avoid shock or damage

Lubricant cleaner for range and oven control shafts, burner valves, and rack paddles. Dissolves residue and restores smooth operation when parts feel stiff.