Parts for Maytag MVWB700BW0: 02 - Control Panel Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer, ensuring the right amount of water enters the tub for each cycle. This valve connects to the water supply and is activated by the washing machine's control board to allow water to flow in and out as needed.

Over time, the water inlet valve can become faulty due to mineral deposits, wear and tear from constant use, or damage to the valve components. If the valve fails, it can cause issues with water flow, affecting the washing machine's performance.

Symptoms of a bad Water Inlet Valve include:

• No water entering the washer
• Slow filling or no water flow
• Washer not filling to the proper level
• Washer overflowing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This control knob replaces a worn or broken knob so you can reliably set and adjust your appliance's settings again. It restores a smooth, positive feel and clear pointer alignment for everyday use.

• Selects and adjusts the matching control (such as burner, temperature, or function) on the appliance
• Worn, cracked, or missing knob can make settings hard to change or read
• Loose or slipping knob may prevent the control shaft from turning properly
• Cosmetic damage can detract from the appliance's appearance

• Disconnect power and allow hot surfaces to cool before servicing
• Pull the old knob straight off the control shaft; do not twist against stops
• Align the flat or D-shaped opening with the shaft and press firmly until seated
• If the knob won't seat, inspect the shaft for damage or debris before reinstalling

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Screw for control panel.

This hex nut secures mating threaded fasteners on appliance assemblies to keep panels and components stable during normal use. It provides a simple, removable connection for service and repairs. What it does:

• Threads onto a matching bolt or stud to hold panels, brackets, or components in place
• Prevents parts from coming loose, reducing vibration and rattling
• A worn or missing nut may cause loose panels, misalignment, or intermittent operation of attached components

• Disconnect power and water before servicing the appliance
• Use the correct socket or wrench size to avoid rounding the nut
• Tighten to a snug fit; avoid overtightening which can strip threads or deform parts
• Replace any fastener with damaged threads or corrosion to ensure secure fastening

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

This genuine replacement mounting screw secures appliance panels and components so assemblies stay aligned and stable during normal use. Use it to replace lost or damaged fasteners and restore safe, rattle-free operation. What it does

• Secures panels, brackets, and small components to the appliance frame
• Prevents loose parts, vibration noise, and misalignment of assemblies
• Restores proper fit where a missing or stripped screw caused gaps or rattles
• Matches original fastening point size and head style for correct engagement

• Use the matching driver bit and moderate torque; overtightening can strip threads or damage parts
• Replace any stripped or damaged mating hardware; do not force a screw into a damaged hole
• Disconnect power or follow appliance-specific safety steps before working near electrical components

This is a replacement 8-18 threaded screw used to secure components in compatible Whirlpool appliances. It provides a like-for-like fastening option when an original screw is lost or damaged, restoring proper fit and function. What it does:

• Fastens panels, brackets, or components where an 8-18 thread screw is required
• Replaces stripped, corroded, or missing screws to stop rattles and looseness
• Matches the fastening method used by the original equipment for reliable hold
• Suitable for areas where the OEM specified an 8-18 threaded screw

• Screw (single)

• Use the correct driver and size to avoid stripping the head or damaging mating threads
• Tighten to snug fit; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power to the appliance before starting repairs when working near electrical components

This replacement power cord restores the appliance's main electrical connection so your unit can receive power safely and reliably. Use it to replace a damaged or worn cord that causes power loss or intermittent operation. What it does

• Provides the primary electrical connection between the appliance and wall outlet.
• Replaces frayed, cut, or otherwise damaged cords that can cause intermittent power or no power.
• Helps eliminate arcing or visible cord damage that may create safety risks.
• Returns dependable power delivery so the appliance can function as intended.

• Always unplug the appliance or disconnect power at the breaker before starting work.
• Route the cord and attach any strain relief or mounting hardware exactly as the original; secure all wiring connections.
• Inspect connectors and wiring for damage before reconnecting power.

Size: 10-24 x 3/8 inch.

This replacement 6-coil wire harness routes power and signals between appliance components to restore reliable electrical connections and component operation. Use this harness when connectors are damaged or circuits are intermittent. What it does:

• Provides the multi-pin 6-coil connection between control and component circuits
• Restores power/signal flow when a worn or damaged harness causes intermittent operation
• Replaces harnesses with frayed wires, broken terminals, or melted/charred connectors
• Helps eliminate component failures caused by loose or corroded wiring connections

• Disconnect all power (unplug or turn off breaker) before starting any repair
• Replace only with the matching part number; match connector shapes and pin counts
• Handle connectors by the housing, not individual wires; make sure all terminals fully seat
• Route and secure the harness away from heat, sharp edges and moving parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.