Parts for Whirlpool WTW8100BW0: 04 - Control Panel Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Water Inlet Valve is an OEM part for Whirlpool washing machines. It controls the flow of water into the washer, ensuring the right amount of water enters the tub for each cycle. This valve connects to the water supply and is activated by the washing machine's control board to allow water to flow in and out as needed.

Over time, the water inlet valve can become faulty due to mineral deposits, wear and tear from constant use, or damage to the valve components. If the valve fails, it can cause issues with water flow, affecting the washing machine's performance.

Symptoms of a bad Water Inlet Valve include:

• No water entering the washer
• Slow filling or no water flow
• Washer not filling to the proper level
• Washer overflowing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This user interface assembly for the lower console replaces the washer's control panel buttons and display so you can restore normal cycle selection and status readouts. It's the direct-replacement interface used on compatible Whirlpool front-load washers. What it does

• Replaces the lower console control surface so buttons and touchpads respond correctly
• Restores display segments and status indicators used during wash cycles
• Fixes symptoms such as unresponsive or intermittent buttons, missing or garbled display segments, or incorrect cycle selection
• Works with the washer's main control to relay user inputs for cycle start, options, and diagnostics

• Disconnect power (and water, if applicable) before starting service
• Handle the assembly carefully to avoid damaging the display, ribbon cable, or connectors
• Installation typically requires removing the console/console bezel and unplugging the ribbon/connector from the main control

Screw for control panel.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This hex nut secures mating threaded fasteners on appliance assemblies to keep panels and components stable during normal use. It provides a simple, removable connection for service and repairs. What it does:

• Threads onto a matching bolt or stud to hold panels, brackets, or components in place
• Prevents parts from coming loose, reducing vibration and rattling
• A worn or missing nut may cause loose panels, misalignment, or intermittent operation of attached components

• Disconnect power and water before servicing the appliance
• Use the correct socket or wrench size to avoid rounding the nut
• Tighten to a snug fit; avoid overtightening which can strip threads or deform parts
• Replace any fastener with damaged threads or corrosion to ensure secure fastening

This genuine replacement mounting screw secures appliance panels and components so assemblies stay aligned and stable during normal use. Use it to replace lost or damaged fasteners and restore safe, rattle-free operation. What it does

• Secures panels, brackets, and small components to the appliance frame
• Prevents loose parts, vibration noise, and misalignment of assemblies
• Restores proper fit where a missing or stripped screw caused gaps or rattles
• Matches original fastening point size and head style for correct engagement

• Use the matching driver bit and moderate torque; overtightening can strip threads or damage parts
• Replace any stripped or damaged mating hardware; do not force a screw into a damaged hole
• Disconnect power or follow appliance-specific safety steps before working near electrical components

This is a replacement 8-18 threaded screw used to secure components in compatible Whirlpool appliances. It provides a like-for-like fastening option when an original screw is lost or damaged, restoring proper fit and function. What it does:

• Fastens panels, brackets, or components where an 8-18 thread screw is required
• Replaces stripped, corroded, or missing screws to stop rattles and looseness
• Matches the fastening method used by the original equipment for reliable hold
• Suitable for areas where the OEM specified an 8-18 threaded screw

• Screw (single)

• Use the correct driver and size to avoid stripping the head or damaging mating threads
• Tighten to snug fit; avoid over-torquing which can strip threads or crack plastic parts
• Disconnect power to the appliance before starting repairs when working near electrical components

This replacement power cord restores the appliance's main electrical connection so your unit can receive power safely and reliably. Use it to replace a damaged or worn cord that causes power loss or intermittent operation. What it does

• Provides the primary electrical connection between the appliance and wall outlet.
• Replaces frayed, cut, or otherwise damaged cords that can cause intermittent power or no power.
• Helps eliminate arcing or visible cord damage that may create safety risks.
• Returns dependable power delivery so the appliance can function as intended.

• Always unplug the appliance or disconnect power at the breaker before starting work.
• Route the cord and attach any strain relief or mounting hardware exactly as the original; secure all wiring connections.
• Inspect connectors and wiring for damage before reconnecting power.

Size: 10-24 x 3/8 inch.

This replacement 6-coil wire harness routes power and signals between appliance components to restore reliable electrical connections and component operation. Use this harness when connectors are damaged or circuits are intermittent. What it does:

• Provides the multi-pin 6-coil connection between control and component circuits
• Restores power/signal flow when a worn or damaged harness causes intermittent operation
• Replaces harnesses with frayed wires, broken terminals, or melted/charred connectors
• Helps eliminate component failures caused by loose or corroded wiring connections

• Disconnect all power (unplug or turn off breaker) before starting any repair
• Replace only with the matching part number; match connector shapes and pin counts
• Handle connectors by the housing, not individual wires; make sure all terminals fully seat
• Route and secure the harness away from heat, sharp edges and moving parts

This name plate is the decorative centennial badge that restores the appliance's exterior appearance and branding. It replaces a missing, damaged, or faded badge to keep the unit looking factory-finished. What it does

• Restores the appliance's exterior badge for a like-new appearance
• Replaces badges that are cracked, scratched, peeling, or discolored
• Helps identify the appliance style when the original emblem is missing
• Cosmetic part only — does not affect appliance operation

• One name plate

• For best results, clean the mounting area and remove dirt or wax before installation
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• If access behind trim is required, unplug the appliance or disconnect power before removing panels
• Follow OEM instructions for removal and reinstallation to avoid damaging clips or surrounding trim

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.