Parts for Electrolux EFLW317TIW2: Control Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Board Assembly is an OEM replacement part for Frigidaire front-loading washing machines. It contains a network of computer chips and circuitry that manages all cycles and settings. 

Symptoms of a bad board include:

• Fault codes or error messages displayed 
• Non-functional buttons that cannot select settings
• Inability to advance through wash cycles
• Improper water leveling or unbalanced loads

Causes involve standard component wear from daily use. Mineral buildup on PCB traces over many years can disrupt semi-conductor performance. Exposure to spills, despite seals, may corrode circuits.

This OEM part is compatible with additional appliance brands including Electrolux, Gibson, and Kelvinator.

A replacement mounting bracket that secures appliance components to the cabinet or chassis, restoring stable support and alignment for panels, assemblies, or controls. What it does

• Provides a durable mounting point to hold panels, assemblies, or components in place.
• Stops loose or sagging panels and reduces rattling or vibration noises.
• Restores proper alignment so doors, panels, or control assemblies fit and operate correctly.
• Replaces damaged, bent, or broken brackets that no longer secure parts.

• One mounting bracket

• Disconnect power (and water, if applicable) before installing to avoid shock or injury.
• Installation typically requires basic hand tools (screwdriver, nut driver); keep hardware and orientation noted for reassembly.
• Do not over-tighten fasteners; align bracket and component before final torque.
• If the bracket mounts to structural studs or inserts, replace any stripped hardware.

This replacement door gasket seals the appliance door to maintain a tight, even seal that helps control temperature and prevent leaks. It restores proper door closure and reduces energy loss when the original gasket is cracked, torn, or hardened. What it does:

• Creates a continuous barrier between the door and cabinet to keep internal air in and outside air out
• Prevents water and air leaks that can lead to frost build-up or inconsistent temperatures
• Improves appliance efficiency by reducing cold/hot air exchange across the door
• Helps the door latch and close evenly for reliable operation

• One door gasket/seal

• Disconnect power to the appliance before starting any repairs
• Remove the old gasket by gently pulling from the door frame; clean the gasket channel before installing the new seal
• Work around the door evenly, pressing the new gasket into the channel to avoid stretching or twisting
• If the gasket is tight after install, allow time for it to relax into place; use care with sharp tools to avoid damage

The Pressure Sensor Switch is an OEM part for Frigidaire washing machines. It is a component located near the pulsator that monitors water pressure within the washer tub during active cycles. The pressure sensor switch detects water pressure levels and transmits that input to the control board so it can regulate operation accordingly.

Causes for failure of the pressure sensor switch tend to be wear over time, accumulation of minerals/debris that impede functionality, or damage from unexpected water pressure rises. As a safety mechanism, this switch helps prevent overflow or other water-related issues by monitoring pressure inside the tub.

Symptoms of a bad pressure sensor switch include:

• Inability to advance to specific cycles like agitation or spin
• Error codes indicating pressure issues
• Cycles not completing properly or automatically stopping prematurely

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

The Main Control Board Assembly is an OEM replacement part for Frigidaire washing machines. It governs all wash cycles, settings, and functions through interfacing with console controls and internal components. 

Causes of a bad main control board can include water exposure over many years, power surges damaging delicate electronic pathways, or component exhaustion from heavy usage.

Symptoms include:

• Inability to turn on or start cycles
• Unresponsive or inaccurate cycle/setting buttons   
• Failure to advance through normal cycle steps
• Repeated error codes and flashing lights

This genuine OEM Frigidaire replacement is also a compatible replacement for Electrolux, Gibson, Kelvinator, and Kenmore models.

This console/handle assembly replaces a worn, cracked, or broken control console handle to restore a secure grip and finished look to your range control area. It mounts to the control console and provides the handle needed to open or support the console panel. What it does

• Provides a durable replacement handle and console trim for the range control area
• Restores a firm, cosmetically correct grip when the original is damaged or loose
• Helps eliminate rattling or loose control-panel movement caused by broken mounting points
• Matches OEM fit and attachment points for direct replacement where designed to fit

• One console/handle assembly

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Remove necessary trim or screws from the control panel to access mounting points; retain fasteners
• Handle with care to avoid scratching finished surfaces; align tabs/clips before seating

No.8 pan head `10 - 10b x 0.50 `cr/sq drive

The Water Inlet Valve and housing is an OEM component designed specifically for Frigidaire washing machines. It consists of the water inlet valve that controls water flow into the washer, along with its surrounding housing. 

Causes of a bad water inlet valve or housing can include mineral buildup that impedes valve opening/closing over time. Mineral deposits may also restrict incoming water flow.

Symptoms of a bad water inlet valve or housing include:

• Inability to properly fill the washer tub  
• Premature draining of water before the cycle is complete
• Continuous water filling without stopping 

This genuine OEM replacement ensures dependable control of water levels during wash cycles. It is compatible with some Electrolux, Gibson, Kenmore, and Alliance branded machines for reliable performance.

This replacement hose routes water within your washer. Replacing a cracked, worn, or leaking hose restores a secure, watertight path so the machine can move water properly without puddles or performance issues.

• Transfers water between internal components during wash cycles
• Maintains a sealed flow path to help prevent leaks
• Damage may present as water on the floor, moisture under the unit, or related fill/drain errors
• Cracks, swelling, abrasion, or loose connections are common failure signs

• Unplug the washer and turn off water supply; have towels or a pan ready for residual water
• Note hose routing and clamp positions before removal; photos can help
• Transfer or replace clamps as needed; seat connections fully and secure firmly
• Run a test cycle and check all connections for leaks

This clamp secures flexible hoses and small-diameter tubing to fittings, helping prevent leaks and keeping connections tight for reliable appliance operation. Use it where a compact, durable clamp is required for water or drain lines. What it does:

• Holds hoses or tubes firmly to inlet/outlet fittings to reduce leaks
• Prevents hoses from slipping off during normal use or vibration
• Helps maintain proper fluid flow by keeping connections sealed
• Useful for water lines, drain hoses, and small appliance tubing

• One clamp

• Turn off and unplug the appliance and shut off water supply before starting
• Inspect the hose and fitting; replace any damaged hose before installing clamp
• Position clamp over the hose/fitting and tighten evenly for a snug fit without crushing the hose

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Water Inlet Valve and housing is an OEM component designed specifically for Frigidaire washing machines. It consists of the water inlet valve that controls water flow into the washer, along with its surrounding housing. 

Causes of a bad water inlet valve or housing can include mineral buildup that impedes valve opening/closing over time. Mineral deposits may also restrict incoming water flow.

Symptoms of a bad water inlet valve or housing include:

• Inability to properly fill the washer tub  
• Premature draining of water before the cycle is complete
• Continuous water filling without stopping 

This genuine OEM replacement ensures dependable control of water levels during wash cycles. It is compatible with some Electrolux, Gibson, Kenmore, and Alliance branded machines for reliable performance.

This O-ring is a small rubber seal that helps prevent water or refrigerant leaks by creating a tight connection between mating parts. Replacing a worn O-ring restores a secure seal and reduces dripping or loss of pressure. What it does:

• Forms a leak-tight seal at a joint or fitting to stop drips and seepage
• Helps maintain proper fluid or refrigerant pressure where used
• Commonly replaced when cracked, flattened, or hardened
• Can eliminate intermittent leaks that occur under load or when the appliance cycles

• Turn off and unplug the appliance and shut off water or refrigerant supply before service
• Inspect mating surfaces and replace any damaged fittings to ensure a proper seal
• Lightly lubricate the O-ring with appliance-safe silicone grease; avoid petroleum-based products
• Do not stretch or nick the O-ring during installation; confirm correct seating before restoring power or supply

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

The Cover is an OEM part for Frigidaire washing machines. This cover marks the location and type of detergent, bleach, or fabric softener to be used, ensuring proper distribution during the wash cycle. It provides clear guidance for correct detergent placement, contributing to optimal washing performance.

Causes of a bad cover can include wear and tear over time, damage from harsh cleaning agents, or physical impact resulting in cracks or faded markings.

Symptoms of a bad dispenser drawer compartment cover include:

• Faded or illegible markings
• Detergent not dispensing correctly
• Leaks or spills around the dispenser area
• Visible cracks or damage to the cover

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Water Inlet Valve and housing is an OEM component designed specifically for Frigidaire washing machines. It consists of the water inlet valve that controls water flow into the washer, along with its surrounding housing. 

Causes of a bad water inlet valve or housing can include mineral buildup that impedes valve opening/closing over time. Mineral deposits may also restrict incoming water flow.

Symptoms of a bad water inlet valve or housing include:

• Inability to properly fill the washer tub  
• Premature draining of water before the cycle is complete
• Continuous water filling without stopping 

This genuine OEM replacement ensures dependable control of water levels during wash cycles. It is compatible with some Electrolux, Gibson, Kenmore, and Alliance branded machines for reliable performance.

This dispenser assembly replaces a worn or damaged refrigerator dispenser to restore reliable dispensing of water and ice. It provides the dispenser housing and interface needed for proper user operation and sealing at the door. What it does:

• Houses the dispenser components and provides the push-lever/door opening for water and ice delivery
• Restores a broken, cracked or loose dispenser opening that causes poor engagement or cosmetic damage
• Helps stop minor leaks or drips at the dispenser area when seals and gaskets are intact
• Eliminates sticking or misaligned dispenser operation that prevents normal dispensing

• Disconnect power and shut off the water supply before beginning any work.
• Installation typically requires removing the refrigerator door panel(s) and detaching the old dispenser from the inner door; keep fasteners for reuse unless replacements are provided.
• Handle plastic parts gently to avoid cracking; inspect door seals and gaskets and replace if worn.
• After installation, restore power and water, then test dispenser operation and check for leaks.

A small metal mounting screw used to secure appliance panels and internal components. Simple replacement that restores proper fit and reduces rattling or loose parts when the original fastener is missing or damaged. What it does

• Secures panels, brackets, or trim pieces to the appliance chassis
• Holds internal components in place to maintain alignment and function
• Helps prevent vibration noise and movement from loose parts
• Suitable where the OEM listed screw size and thread match the original

• Disconnect power and water before servicing
• Use the correct screwdriver or driver bit to avoid stripping the head
• Start threads by hand to prevent cross-threading; tighten until snug—do not overtighten
• Keep any removed screws organized to ensure correct reassembly

This is a dispenser inlet gasket intended for use on washing machines. This part ensures that the hot and cold water lines do not leak at the point where they are connected to the appliance. If the washing machine is leaking, the gasket may need to be replaced.Replacing a dispenser inlet gasket in a washing machine can be done easily. Screwdrivers and pliers are required. Disconnect the appliance before starting the repair. Wear work gloves for safety. The hot and cold water lines should both be turned off and removed to prevent flooding.This dispenser inlet gasket is an authentic OEM replacement part. It is sourced from the manufacturer. The replacement component is made of high-quality materials. It can be installed in several different models of washing machines. The dispenser inlet gasket is compatible with appliances produced by Frigidaire, Gibson, Electrolux, Westinghouse, and Kelvinator brands.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.