Parts for Ge WCVH6800J1MV: 01 - Controls & Dispenser Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Replacement child lock button for washers. Installs on the control panel. Needed when the button is cracked, broken, missing, or no longer clicks properly.

Replacement mounting screw for washers. Secures internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Replacement mounting screw for washer pedestals. Secures pedestal to washer base. Order if original screw is stripped, missing, or damaged.

This rear cover protects the back of your washer's control panel and internal wiring from moisture and damage. It provides a barrier between the electronic components and the humid environment inside the washer. Replace it if it's cracked, warped, or missing, which could allow water to damage the control electronics.

Front top mounting bracket for your washer. Secures the top panel to the cabinet frame. Replace if cracked, bent, or missing to restore stability.

Replacement self-tapping screw for securing panels, brackets, and small components on washers. Needed when original fasteners are missing or damaged.

This control panel assembly replaces the membrane keypad and front overlay so you can restore microwave controls and display feedback. It provides the tactile interface and sealed surface used to select cook settings and timers. What it does:

• Replaces worn or unresponsive keypad buttons and damaged overlay to restore button input
• Restores display and tactile feedback when the original panel shows blank readout or missed presses
• Seals the front of the control area to protect internal electronics from spills and grease
• Works with the microwave's user interface board to send commands for cook cycles and timers

• Disconnect power (unplug or shut off breaker) before attempting any repair
• Handle the ribbon cable and connector gently; avoid bending contacts or pulling on wires

Replace your washer's rinse button control. Installs on the control panel. Needed when the original button is cracked, broken, or missing.

A flexible hose that delivers water to the wash basket during various cycle phases for cleaning clothes. Replace if you notice weak water pressure, leaks during operation, or if the washer displays fill-related error codes.

Secures multiple small pipes to reduce vibration and prevent chafing. Replace if cracked, loose, or causing rattling. Confirm fit with your model.

Siphon pipe for washer drain air-break assembly. Prevents backflow and unintended siphoning. Replace if cracked, broken, or missing from detergent dispenser.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This detergent insert holds and dispenses liquid detergent during your dishwasher's wash cycles. It ensures proper detergent release at the right time for effective cleaning. Replace this part when detergent doesn't dispense properly or when the insert becomes cracked or damaged.

Replacement lid for washer bleach dispenser compartment. Keeps bleach contained during fill cycle and prevents spills. Order if cracked, missing, or broken.

Fix a broken or cracked washer dispenser drawer front. This replacement front panel restores the look and function of your detergent dispenser drawer.

This diverter valve directs wash water inside the machine, switching flow between internal paths during wash and drain/recirculation steps. Replacing a failed diverter restores proper water routing so cycles advance and complete as designed.

• Redirects water between the drain and recirculation/spray paths as commanded by the control
• Ensures correct water flow for wash, rinse, and drain steps
• A sticking or failed diverter can cause slow/no drain or no recirculation/spray
• May lead to cycle pauses/errors, unusual clicking/buzzing from the valve area, or leaks at the valve body/ports

• Unplug the washer and turn off water supply; expect residual water in hoses
• Access location varies by model; typically mounted along the pump/hoses under the cabinet
• Move hoses/clamps and the electrical connector one at a time; match port orientation
• After installation, run a rinse/drain test and check all connections for leaks

Diverter indicator for washers. Indicates water flow direction during wash cycles. Replace if cracked, broken, or no longer functioning properly.

Replacement diverter lever plate for your washer. This mounting plate secures the diverter mechanism. Order a new plate if yours is cracked or broken.

Dispenser inlet nozzle for washers. Connects to the detergent dispenser housing. Replace if cracked, clogged, or leaking during wash cycles.

Secures the detergent dispenser in your washer. Replace if the dispenser is loose, leaking, or not staying in place. Verify fit with your model number.

This Main box is the control housing that holds and protects the range/stove electronic components and wiring, keeping controls secure and organized for reliable operation. What it does

• Houses the main control electronics and wiring harness connections to protect them from heat and debris
• Provides secure mounting for the control board and user interface components
• Faulty or cracked housing can cause loose connections, intermittent controls, or visible damage to electronics
• Replace if the housing is cracked, melted, or no longer secures the control board properly

• One main box / control housing

• Disconnect power to the appliance before starting any repair
• Handle electronic components carefully and avoid static discharge; transfer any control board or harnesses exactly as removed
• Secure all fasteners; do not force parts into position
• After installation, restore power and test all functions; stop and re-check wiring if controls remain unresponsive

Self-tapping screw for securing washer components and panels. Replace worn, stripped, or missing screws during repairs or reassembly of your machine.

This rubber gasket creates a watertight seal around water inlet connections in your washing machine. It prevents leaks and ensures proper water pressure for filling the tub during wash cycles. Replace this gasket if you notice water dripping from hose connections or if the washer takes too long to fill.

This gasket nozzle washer is a small rubber seal that fits at a spray/nozzle connection to help prevent leaks and ensure proper water flow. Replacing a worn gasket restores a secure seal and reduces dripping or pooling. What it does:

• Seals the connection at a spray nozzle or outlet to help stop leaks
• Maintains correct water flow through the nozzle for effective spraying
• Commonly replaces hardened, cracked, or flattened gaskets that allow dripping
• Helps eliminate minor water pooling or visible leaks near the nozzle area

• Turn off power and water supply to the appliance before servicing
• Remove the nozzle or fitting per the manufacturer's instructions; replace the old gasket with the new washer, ensuring it seats evenly
• Inspect mating surfaces for debris or damage before reinstalling

Stacking kit mounts your dryer securely on top of your washer to save floor space. Includes brackets and hardware. Replace if missing or damaged.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.