Parts for Kitchenaid KFDC558JBK01: Cooktop, Burner And Grate Parts

This side compartment is a replacement refrigerator door shelf that restores secure storage on the door and keeps bottles, jars and other items organized. It fits into a compatible refrigerator door to replace a cracked, broken or missing shelf. What it does:

• Provides a stable shelf on the refrigerator door for bottles, jars and small containers
• Replaces a cracked, broken or missing door shelf that allows items to tip or fall
• Restores proper spacing and organization inside the door storage area
• Helps keep stored items contained when opening and closing the door

• One side compartment

• High-level, snap-in installation—inspect mounting pegs or clips for damage before installing
• Power does not usually need to be disconnected, but remove all items from the shelf and wear gloves to avoid sharp edges
• If mounting clips are damaged, replace clips or the entire assembly to ensure a secure fit
• Test door operation with the shelf loaded to secure installation

This side compartment is a direct-fit door bin that restores storage on the refrigerator door, keeping bottles and small items secure and organized. Durable molded plastic replaces cracked or missing bins for reliable everyday use. What it does:

• Replaces a cracked, broken or missing door bin to restore storage capacity and organization
• Holds bottles, condiments and small containers along the inside of the refrigerator door
• Prevents items from falling when the door opens and closes
• Matches the factory shelf design for correct fit and alignment

• High-level snap-in/screw-in replacement; remove existing bin then install new bin until it seats
• Disconnect power only if removal requires working near electrical components; otherwise power disconnection is not typically needed
• Handle carefully to avoid damage to adjacent door liners or gaskets

Mounting bracket that secures the ORF assembly inside your gas range. Replace if the bracket is cracked, broken, or missing to restore proper alignment.

Fixes weak or uneven flames on gas burners. This orifice spud secures the burner orifice and directs gas flow for reliable ignition and consistent heat.

Burner producing weak, uneven, or no flame? This natural gas orifice meters precise gas flow to restore proper flame size and consistent heating.

Weak or uneven flame? This burner orifice meters gas flow for proper flame size and consistent heat. Restores reliable ignition on gas ranges and cooktops.

Fixes uneven flames or incorrect burner output on your gas cooktop. This natural gas orifice restores proper gas flow to your 15,000 BTU burner. Direct-fit.

If your gas range burner won't light or clicks continuously, the surface ignitor may need replacement. This part sparks to ignite the gas flame.

This is a surface burner igniter that generates a spark or glowing heat to light the gas on a cooktop burner. It is mounted near the burner head and activates when the corresponding knob is turned. Replace this igniter if the burner clicks but does not light, takes a long time to ignite, or does not spark at all when the knob is engaged.

If your gas burner won't light or clicks continuously, replace the surface burner igniter. This spark electrode restores reliable ignition in 15 minutes.

Burner grate sits atop gas burners to support cookware during cooking. Replace if cracked, broken, or warped. Heavy-duty design for daily use.

Cast iron burner grate for gas ranges and cooktops. Sits atop burners to support pots and pans. Replace if warped, melted, cracked, or damaged.

Insulating pad that protects cooktop surface under burner grates. Replace if worn, damaged, or causing scratches. Confirm fit with your model number.

Burner cap sits atop each surface burner on gas ranges and cooktops. Replace if cracked, chipped, warped, or missing to restore proper flame distribution.

Fixes uneven flames or weak heat on your gas cooktop. This burner head ensures proper gas distribution. Simple DIY repair, typically takes 15 minutes.

If your burner flame is uneven or won't light properly, the burner head may be damaged. This part distributes gas for stable flame production.

8-18 x 1.125-inch screw secures panels, brackets, and trim on gas ranges and cooktops. Replace if missing, stripped, or corroded during repairs.

This control knob is a direct-replacement user interface part that restores safe, reliable control of your appliance's settings. It provides a firm grip and smooth rotation so you can accurately set temperature or cycle selections. What it does:

• Replaces a worn, cracked, or stripped control knob so you can turn settings easily
• Fits onto the control shaft to select cycles, temperatures, or burner levels
• Eliminates slipping or loose knob feel that prevents accurate adjustments
• Restores tactile feedback for precise user input

• Disconnect power to the appliance before replacing the knob to avoid injury
• Pull the old knob straight off the control shaft; align splines and push the new knob on firmly
• If the knob is tight, ensure correct spline orientation—do not force or hammer

This smooth glass cooktop replaces a cracked, scratched, or worn cook surface to restore a flat, easy-to-clean cooking area and proper heating contact for radiant elements. Designed to match the original cooktop appearance and function. What it does:

• Provides a flat, durable cooking surface for smooth-top electric ranges
• Restores correct fit and contact for radiant heating elements to help even heating
• Replaces cracked, chipped, or permanently stained cooktop glass to improve safety and usability
• Helps prevent food and liquid from reaching internal components through damaged glass

• For safety, disconnect power to the appliance before starting any repair
• This part typically installs from above or beneath the cooktop; follow your model's service manual for exact steps
• Handle the glass carefully to avoid breakage and wear protective gloves and eye protection
• If mounting hardware or gasketing is missing, verify and order those separately

This replacement cooktop glass surface restores the smooth, easy-to-clean top on compatible Whirlpool cooktops. It gives a fresh, intact cooking surface when the original glass is cracked, chipped, or cosmetically damaged. What it does:

• Replaces a cracked, chipped, or scratched cooktop glass surface to restore a smooth cooking area
• Provides a sealed, easy-to-clean surface for radiant or electric cooktops
• Helps prevent glass fragments and reduces snagging of cookware on damaged areas
• Restores the appliance's appearance and normal countertop integration

What's included: One replacement cooktop glass surface. Install notes:

• Disconnect power to the appliance before starting any repair to avoid shock hazards.
• Handle glass with care; wear cut-resistant gloves and eye protection when removing/installing.
• Installation may require removal of trim, burners, or mounting brackets—keep all fasteners and follow model-specific instructions.

Control knob for gas range burners. Installs on the control panel to adjust burner temperature settings. Replace if cracked, broken, or difficult to turn.

Control knob for gas cooktops and ranges. Installs on the control panel for temperature adjustment. Replace if cracked, broken, or missing.

Decorative trim panel for gas range or cooktop. Replaces cracked, chipped, or discolored trim pieces along the top edge. Restores appearance.

Replace your range indicator light lamp assembly to restore control panel visibility. Swap when indicators dim or fail to show active settings.

Decorative trim panel for gas range cooktops. Replaces cracked, chipped, or worn trim pieces. Installs around burner area to restore clean appearance.

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This infinite switch is the control that regulates heat for a range's surface top burner, letting you vary burner temperature smoothly for cooking. It replaces a worn or failed control to restore adjustable burner heat. What it does:

• Controls the top burner's heat level by cycling power to the surface element
• Restores adjustable temperature when a burner won't change heat settings
• Stops erratic cycling or constant-on surface caused by a failed switch
• Helps eliminate no-heat or intermittent-heat symptoms at the affected burner

• Disconnect power to the range before servicing to avoid electrical shock
• Remove the cooktop or control panel to access the switch
• Take care when handling glass cooktops, trim, and wiring harnesses to avoid damage

This 8-32 x 5/8 screw replaces missing or damaged hardware specified by the manufacturer to secure panels, brackets, and internal components in your appliance. Restores a tight, rattle-free fit to help prevent vibration and misalignment.

• Provides the correct 8-32 thread and 5/8-inch length where specified
• Secures sheet-metal panels, brackets, and internal assemblies
• Replaces missing, stripped, or corroded screws
• Symptoms include loose or rattling panels, misaligned parts, or hardware that won't stay tight

• Disconnect power; shut off gas before servicing
• Support panels/components while removing or installing hardware
• Start threads by hand to avoid cross-threading; tighten only until snug
• Match the original screw's location and orientation for proper fit

Fix unresponsive or stuck control panel buttons on your range. This push button restores tactile feedback for selecting cycles and options. Simple repair.

Range mounting screw for securing components and panels. Replace this hardware part if the original screw is stripped, missing, or no longer holding securely.

This is a Wi-Fi module assembly that enables wireless connectivity for your appliance, allowing it to communicate with smart home networks and companion apps. It plugs into the main electronic control board. Replace this module if your appliance fails to connect to Wi-Fi, repeatedly drops its wireless connection, or is no longer discoverable by the companion app.

Replacement mounting screw for refrigerators, ranges, and other appliances. Replaces lost, stripped, or damaged screws during repairs or maintenance.

Plastic retainer clip that secures panels, trim, or wiring in your gas range. Replace if clip is cracked, broken, or missing to restore proper fit.

This is a small speaker used in a microwave to produce audible alerts and tones, such as the beep that sounds when cooking is complete or buttons are pressed. If your microwave no longer beeps, produces distorted sounds, or has no audio feedback at all, this speaker likely needs replacement.