Parts for Kitchenaid KFGS366VSS02: 01 - Cooktop, Burner And Grate Parts

Uneven flame or weak burner heat? This semi-rapid burner cap centers the gas flame for consistent cooking. Fits over the burner head. Simple install.

Fix uneven flames or poor ignition with this black rapid burner cap. Restores proper heat distribution on gas cooktops. Direct-fit replacement part.

Replace your auxiliary burner cap if warped, cracked, or not sitting flat. Restores proper flame shape and heat distribution. Verify fit with your model.

Cast iron grate that sits over the burner on your cooktop. Replace if cracked, chipped, rusted, or missing to safely support pots and pans during cooking.

Replaces worn, cracked, or missing burner control knob on your cooktop. Restores clean appearance and smooth heat-level adjustment at control panel.

This orifice holder secures the gas orifice in your cooktop burner assembly. Replace if cracked, broken, or missing to properly mount the orifice.

Replacement orifice holder for gas cooktops. Secures the gas orifice in place within the burner assembly. Order a new holder if damaged or missing.

Orifice holder for gas cooktops. Secures the burner orifice in place. Replace if cracked, broken, or missing to properly mount the gas orifice component.

This burner base holds and positions the gas burner assembly on your cooktop surface. It provides proper alignment for gas flow and flame distribution while securing the burner components in place. Replace this base if your burner sits unevenly, has poor flame distribution, or the burner assembly feels loose.

Auxiliary burner head for gas cooktops. Distributes flame evenly on the small simmer burner. Replace if cracked, warped, clogged, or discolored.

Burner head for the large rapid burner on gas cooktops. Distributes gas through ports to create an even flame. Replace if discolored, corroded, or damaged.

Replacement burner head for gas cooktop semi-rapid burners. Sits atop the burner to shape and direct the flame. Replace if discolored, corroded, or worn.

M4-0.7 metric screw secures panels, brackets, and internal components on gas cooktops. Replace stripped, missing, or damaged screws for proper assembly.

Burner orifice spud for gas cooktops. This brass fitting installs on the burner assembly to regulate gas flow. Replace if worn or damaged.

Replace a cracked, worn, or missing burner orifice spud on your cooktop. This brass fitting controls gas flow to the burner and may need replacement.

Fix uneven flames or incorrect burner heat output with this cooktop burner orifice spud. Controls gas flow to burners for proper flame adjustment.

This electrode creates the spark that ignites gas at your cooktop burner. It works with the ignition system to provide reliable flame lighting when you turn on a burner. Replace it if clicking sounds occur but the burner won't light, or if there's no spark at all.

Fix gas burners that won't light or spark intermittently with this igniter electrode wiring harness. Connects electrodes to ignition system for reliable starts.

Fix a gas cooktop burner that won't light or clicks continuously. This surface igniter creates the spark needed for reliable burner ignition.

Fix burner clicking or failure to light with a new surface igniter. Restores reliable spark ignition on gas cooktops and ranges. DIY repair in 15 minutes.

This Holder ORF is a small mounting bracket designed to secure a nearby component and restore proper alignment and stability. It replaces a worn or broken holder so moving parts sit and operate correctly. What it does:

• Secures and supports a component assembly to prevent sagging or misalignment
• Keeps parts from shifting, rubbing, or vibrating during normal operation
• Helps stop noises caused by loose or damaged mounting points
• Restores proper fit and movement where the original holder has failed

• One Holder ORF

• Disconnect power and/or water supply before servicing the appliance
• Access the mounting location by removing the appropriate panel or trim
• Retain existing fasteners unless replacements are specified; part typically installs with screws or clips

Burner won't light or ignite? This electrode creates the spark needed to ignite gas burners. Repairs cracked or non-sparking ignitors on gas cooktops.

Secures components in place on your gas cooktop, preventing unwanted movement of shafts and bearings. Replace if worn or damaged. Verify fit with your model.

The Clip is an OEM component specifically designed for Whirlpool free-standing electric ranges, securely fastening rack guides, and wire assemblies. This versatile clip features corrosion-resistant anchors and firm spring coils.

Causes of failure involve metal fatigue weakening the spring over years of expansion and contraction during heating, worn surfaces losing grip, or damaged barbs failing to anchor the racks correctly.

Symptoms of a bad cooking rack clip include:

• Loosened racks skewing pans off-center  
• Detached wires posing burn and electrical hazards
• Rattling components exacerbating noises  
• Difficulty transferring baking sheets without obstruction

Replace yours today with this genuine OEM Whirlpool clip. Compatible with KitchenAid, Maytag, and Jenn-Air appliances as well, its reinforced coils maintain constant tension for organized baking.

Cooktop burner gasket seals the burner assembly to prevent gas leaks and ensure proper combustion. Replace if worn, cracked, or damaged. Confirm fit with your model.

Replace your range burner gasket to seal gaps and prevent gas leaks. Install when worn, cracked, or damaged to ensure safe operation. Verify fit with your model.

This nameplate displays your dishwasher's model information and operating instructions for easy reference. It adheres to the appliance's exterior and provides important safety and usage details. Replace this nameplate if it becomes illegible, peels off, or gets damaged during cleaning.

Replacement control knob for your cooktop. Restores worn, cracked, or missing knobs so you can select heat settings. Durable plastic with push-on fit.

Small metal cap that sits on the center of your gas cooktop burner head to direct and shape the flame. Replace if damaged, cracked, or missing.

If your gas cooktop has uneven flames, poor ignition, or a cracked cap, this burner cap restores proper flame distribution. Easy 5-minute replacement.

Replacement burner head for gas cooktops. Distributes gas evenly through flame ports. Replace if damaged, clogged, corroded, or missing to restore burner.