Parts for Kitchenaid KGCC766RSS01: 01 - Cooktop, Burner And Grate Parts

Fix burners that won't click or ignite without turning on another burner. This spark electrode creates the spark needed to light gas burners. DIY repair.

This is a black burner cap that sits on top of the surface burner base on a gas cooktop or range. It distributes the gas flame evenly around the burner for consistent heating. Replace this cap if it is cracked, warped, or chipped, which can cause uneven flame patterns or poor ignition.

This is a matte black center burner cap that sits on top of a sealed gas burner on a range or cooktop. It distributes the flame evenly around the burner for consistent heating. Replace this cap if it is chipped, cracked, discolored, or if the flame pattern from the burner appears uneven or irregular.

This replacement cap restores the finished look of a damaged or missing control cap and helps protect the underlying control shaft and fastener. Matches the coal matte black finish for a factory appearance. What it does:

• Covers and protects the control shaft and retaining screw from debris and wear
• Restores a worn, cracked or missing cap so the control looks like new
• Helps keep the control knob seated and stable during use
• Useful when the original cap is chipped, faded or cosmetically damaged

• Unplug the appliance or shut off power at the breaker before servicing
• Remove the control knob (pull straight off) to access the cap if needed
• Press the cap into place over the control shaft until it snaps or seats securely
• If a retaining screw is present, verify fit before reassembly; do not force or modify the part

Replaces scratched, faded, or missing finish cap on your gas cooktop. This coal matte black trim piece covers exposed hardware for a clean look.

Color: Black. Dual.

Replace your gas cooktop's burner orifice if damaged, clogged, or missing. This brass fitting regulates gas flow to individual burners.

Gas burner orifice for cooktops. Installs in the burner valve assembly to regulate gas flow. Replace if damaged, clogged, or missing for proper flame.

Replace worn burner orifices causing uneven flames or weak heat output on your gas cooktop. Fits rear burner positions. Direct replacement part.

Replace a damaged or incorrectly sized burner orifice on your gas cooktop. This part controls gas flow to ensure proper flame size and efficiency.

Black control knob for cooktop burners. Attaches to valve stem to adjust heat settings. Replace if cracked, worn, or missing for proper control.

Fix weak or uneven flames caused by a worn orifice holder. This part secures the gas orifice for consistent flow and reliable ignition. Simple DIY fix.

If your cooktop burner won't ignite reliably or flame is uneven, a damaged orifice holder may be the cause. This part directs gas flow to the burner head.

Secures the gas orifice beneath your cooktop and routes gas to the burner head. Replace if cracked, damaged, or missing to restore proper alignment.

Fix burner ignition problems or weak flames with this cooktop gas burner orifice holder. Channels gas from valve to burner head for reliable performance.

Burner head sits on the base and distributes gas through precision ports for even flame. Replace if cracked, clogged, or corroded for proper ignition.

Auxiliary burner head for gas ranges and cooktops. Mounts over the orifice to distribute gas through precision ports. Replace if clogged or damaged.

Burner head for gas ranges and cooktops. Distributes gas evenly to create a proper flame. Replace if cracked, damaged, or clogged with buildup.

This burner head mounts on the cooktop and distributes gas evenly to produce a steady flame. Replacing a worn or damaged head restores proper flame pattern and helps your burner light quickly and cook consistently.

• Directs gas through precisely sized ports to create an even flame
• Can resolve issues like uneven flames, yellow/orange flames, or delayed ignition
• Helps when the burner won't light or only lights partially
• Replaces a corroded, clogged, or warped burner head

• Disconnect power and shut off gas supply before servicing
• Allow the cooktop to cool completely
• Lift off the grate and cap; remove the old head and align the new head on the burner base
• Ensure ports are clean and seated correctly; test for proper ignition and flame

Replacement mounting screw for securing panels, brackets, covers, and trim pieces in appliances. Restores fit when hardware is missing, stripped, or lost.

Torx screw secures burner assemblies, igniters, and internal components in gas cooktops and ranges. Replace rusted, stripped, or broken screws.

This is a rubber or silicone grommet used on the range to cushion, seal, or protect components where wires or tubing pass through metal panels. It helps reduce vibration and prevents chafing or damage to wiring. Replace this grommet if it has become brittle, cracked, or missing, which could lead to rattling noises or exposed wiring.