Parts for Maytag JDS8850CDW00: 01 - Cooktop Parts

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This replacement screw secures appliance panels and components to restore proper fit and prevent rattling or movement. It's a direct-fit fastening part used where the original OEM screw is specified. What it does:

• Secures trim, access panels, or internal components to maintain structural fit
• Prevents vibration noise and loose parts by holding assemblies firmly
• Matches OEM fit and threading for correct engagement when used in original locations
• Intended for repairs that require the exact replacement fastener

• Disconnect power and unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic

The Control Panel is an OEM part for Whirlpool ranges. It houses the interface that allows for tactile selection of oven functions like bake, broil and temperature settings.

Causes of control panel failure can include water damage, cracking of the membrane surface from impact or age, or failures in the underlying circuitry.

Symptoms of a defective control panel include:

• Unresponsive or intermittent buttons
• Inability to select cooking modes
• Faulty displays or failure to indicate oven status
• Repeated error codes shown on screen

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This genuine replacement control knob restores secure, easy-to-use control of your appliance's settings. It provides a clear grip and pointer so selections are easy to read and change. What it does

• Replaces a cracked, stripped or missing control knob so the control shaft can be turned smoothly
• Restores a visible pointer for accurate temperature or cycle selection
• Helps prevent slipping or accidental changes by providing a firm grip
• Fits on a splined control shaft to engage the selector mechanism

• One control knob

• Remove the old knob by pulling it straight off the control shaft; push the replacement knob fully onto the shaft until seated
• If knob is tight, pull with a steady, even force or use a non-marring puller tool
• Disconnect power to the appliance before servicing if removal requires access behind the control panel
• Do not force onto an incompatible shaft; verify spline match before installation

This control knob replaces a worn or missing dial so you can reliably select settings on your appliance. Restore smooth, positive control and a like-new look when an old knob cracks, strips, wobbles, or falls off.

• Attaches to the control shaft so you can choose functions, temperatures, or speeds
• Provides a secure grip for accurate adjustments
• Typical symptoms include a cracked or missing knob, loose or wobbly feel, spinning without engaging, or difficulty turning to Off
• Direct replacement designed to fit the original control stem on compatible models

• Turn the appliance off and allow any hot surfaces to cool
• Pull the old knob straight off the control shaft; avoid prying against the console
• Align the new knob with the shaft and press straight on until fully seated
• Test operation to ensure the pointer aligns with Off and the control engages properly

Color: Black. Size: Large.

6,000 BTU. Color: Coal matte black. Measures about 2 inches in diameter.

The Large Burner Head is an OEM part for Whirlpool gas ranges and cooktops. It is designed to fit over the burner base and distribute the gas evenly for efficient and consistent heating.

Causes of a bad burner head can include blockages from food debris or residue buildup, warping or damage from high heat exposure, or general wear and tear over time.

Symptoms of a bad Large Burner Head include:

• Uneven heating or hot spots on the burner
• Yellow or irregular flame patterns
• Difficulty igniting the burner or keeping it lit
• Loud popping or hissing noises during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a Whirlpool oven control board. The oven control board sits behind the main user interface assembly. This board works in direct conjunction with the buttons on the interface to control the vital functions of the oven, such as bake, broil, and self-cleaning. Telltale signs of a malfunctioning control board are smells of burning plastic coming from the interface and losing one or more oven functions. Immediately discontinue using the appliance if a shorted control board is suspected. Begin installation by unplugging the oven from the power source. Open the oven door and remove the screws beneath the control board assembly. On the sides of the control assembly, two tiny screws hold it in place. Remove these, and with a slight pull, the user interface should pop off. The control board is directly behind the main assembly and is held by either two tiny screws or clips that loosen with a flat head screwdriver. Remove the control board from the wiring harness and begin installing the new component.This product is sold individually and is sourced directly from the manufacturer as a genuine OEM part. This product is compatible with Whirlpool and Jenn Air appliances.

The Top Burner Igniter is an OEM part for Whirlpool gas cooktops and ranges. This thin metal coil provides the spark to light the burner flames during startup. It is a spark electrode with a male spade connection.

Causes involve cracking of fragile ceramic insulator casings allowing moisture ingress, compromised electrical connections cutting off sparking ability, or general wear reducing spark output strength.

Symptoms of failure consist of:

• Inability to light one or more front gas burners
• Click sounds but no flame present when turning burner knob
• Safety issues arising from unlit gas accumulating

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.