Craftsman Chainsaw Spring Parts

The recoil spring is a vital part of the starter mechanism in chainsaws. It will apply tension on the pulley, which allows it to retract the rope. Without a working spring, it will be difficult or even impossible to start the chainsaw. While the metal springs are durable, they could start to wear out over time and will no longer be effective. In addition, the springs could suffer damage or could become corroded. They could also be lost when making other repairs to the chainsaw. If there is any issue with the spring, it will require a replacement. This authentic OEM replacement recoil spring is sold individually. The chainsaw recoil spring is compatible with several brands including Poulan, Poulan Pro, Husqvarna, Jonsered, Craftsman.

This extension spring attaches to the axle support bracket and the drive belt idler pulley on many types of lawn and garden equipment. It creates additional tension to the drive belt idler pulley. Sometimes the extension spring can be stretched out or may break, often caused through excess use. If this is the case, the spring will need to be replaced.If the spring is broken or no longer creates the appropriate amount of tension, replacement is required. It is an easy process that only requires a set of pliers. The pliers can be used to take the old spring off of the yard equipment before attaching the new extension spring. Make sure the equipment is on a stable surface and powered off when working with it. Remove the spark plug wire to prevent accidents.This extension spring is an authentic OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. The spring is made to be used with lawnmowers, lawn tractors, and tillers created by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Cub Cadet, and Craftsman.

This part is a handguard spring for a chainsaw. The handguard spring returns the handguard to the forward position when the handguard is released.A new handguard spring may be needed if the handguard no longer returns to the forward position when the handguard is released. If the spring is broken in any way, it will no longer work properly and will need to be replaced. The spring could become damaged or break after normal use due to normal wear and tear over time. If this is the case, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This handguard spring is a genuine Husqvarna part. It is sold individually. This particular handguard spring is compatible with chainsaws that are manufactured by the Husqvarna brand and the Craftsman brand.

This part is a replacement spring ignition switch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or faulty spring ignition switch in a variety of gas chainsaw models.This part is essential for applying tension to the throttle control lever. If the spring ignition switch is malfunctioning, the chainsaw will not work properly, and the user will not have sufficient control over the throttle. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. Proper tools are required to replace this part. For more accurate information on how and where to install this spring ignition switch, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this spring ignition switch is suitable for use on several different models of gas chain saws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

The chainsaw isolator kit is a spring mechanism that is designed to help reduce vibrations in the equipment while it is being used. Reducing vibrations makes the equipment more enjoyable to use and protects it from additional damage that could occur. This assembly can become worn over time, which will lead to increased vibrations and less stable use of the chainsaw. Replacing the isolator with this kit can alleviate the issues and provide a solution for many common issues. This genuine OEM isolator kit is manufactured by Poulan to exact standards so that it provides an exact fit for compatible models of chainsaws. It can be used with hundreds of chainsaws from Poulan, Jonsered, and Husqvarna. Refer to model diagrams for appropriate installation, placement, and part compatibility information. This is an individual part that is sold as a single unit. This isolator assembly includes all the parts needed for a full replacement: one bolt, two springs, and one isolator with a bar that includes two bolts for mounting. No additional parts or hardware will be required to go with this part replacement.

This recoil spring is a genuine Husqvarna part, sold individually. This recoil spring can be used as a replacement part in a string trimmer. This part holds the pulley in place and assist with powering the appliance.The recoil spring in a string trimmer might have to be replaced if it suffers damage that renders the recoil spring incapable of performing its typical function at some point in the standard lifespan of the appliance. The recoil spring could be damaged as a result of general wear and tear from long-term use or due to a collision with a hard object.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This recoil spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This genuine OEM hub spring is designed to fit select models of chainsaws. The hub spring is responsible for providing the spring action that reacts to the pull starter. This generates the power that rotates the flywheel and helps engage the engine in the starting process. The spring becomes worn and extended with regular use. Since it is metal, it may also be subject to corrosion or other environmental damages. In either case, the hub spring should always be replaced promptly if it is found to be defective or damaged in any way. This genuine hub spring can be used for a variety of chainsaws from Poulan, Husqvarna, AYP, Sears/Craftsman, Roper, Poulan Pro, and Weed Eater. This item is sold as an individual unit. Springs are under pressure and can be dangerous to replace so always use caution. Allow the engine to cool before beginning repairs and always wear gloves for any kind of engine part repairs or replacements.