Craftsman Chainsaw Starter

When you pull the starter rope, it will engage the chainsaw starter pulley, which then makes the flywheel engage and causes the engine to fire up. The assembly consists of a few small working parts that can wear out or become damaged or lost over time. The included spring may wear or you may lose one of the screws that secure it in place. This OEM kit makes it easy to replace the entire assembly with an exact fit for compatible models. When installing this starter pulley kit, remove or disconnect the spark plug for your safety. This genuine OEM chainsaw starter pulley kit is designed for use with a variety of chainsaws that are manufactured by brands like Husqvarna, Craftsman, and Poulan. Check your user manual to confirm part number compatibility for an exact fit. This starter pulley kit is sold individually and comes with everything that you need for a quick and easy replacement.

A starter housing assembly is a plastic unit that attaches to the top of the engine to protect the starter. It is also where the starter rope is attached and it covers the flywheel that is responsible for engaging the motor. Debris can hit the cover and cause damage, or it could simply become damaged or worn over time. If this happens, you will want to replace it as soon as possible in order to ensure the safe operation of your equipment. This OEM unit includes the top cover, flange, and hardware necessary for installation. When replacing the starter housing or any other internal parts, disconnect the spark plug for safety. Be sure to wear gloves, as well, and follow all instructions for proper installation. This starter housing assembly is a genuine MTD product that can be used with various walk-behind lawnmower engines. It is compatible with select models from MTD, Troy-Bilt, Cub Cadet, Craftsman, Yardman, Yard Machines, Remington, Bolens, LawnChief, Huskee, and Ryobi. Part sold individually.

The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.

This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.

This genuine Echo starter handle can be used as a replacement part for chainsaws, leaf blowers, leaf vacuums, and string trimmers. The function of a starter handle for one of these types of small engine appliances is to use in conjunction with a starter cord to power up the engine. It is meant for walk-behind appliances that are powered up by recoil starters.A starter handle might need to be replaced if it can no longer turn on the engine in conjunction with the starter rope. If the rope has permanently detached from the starter handle in a way that cannot be simply repaired or if parts of the handle have been damaged or have fallen off, the starter handle must be replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter handle is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.

This replacement part is a starter pulley. It is a genuine replacement part made by Husqvarna. These types of pulleys are commonly responsible for making sure that two different parts are working together. These two parts usually require a rotating or turning motion. The pulley is situated so that they are able to work together when the appliance is in use to help operate the engine.A new starter pulley might be needed if the turning or rotating motion inside the engine is not working properly. This can be because the pulley is broken or damaged in some way and not able to provide the motion for linkage of the parts. Because this part is situated near the engine, be sure the appliance is cooled off before attempting this repair.This pulley is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This is a starter hub replacement designed for use in select models of lawn and garden equipment. The starter hub is part of the starter system. The starter pulley will engage the hub, which will then engage the flywheel to start the motor. The hub is subject to constant repetitive motion and rotation, so it can often become worn or damaged over time. Without a functional starter hub, the engine will not be able to operate safely, which is why an OEM replacement is essential.It is important to wear gloves when performing engine repairs. In order to replace the starter hub, the old part will need to be removed from the starter assembly. Then, the new hub can be put in place and connected to the flywheel and the starter pulley. Be sure to disconnect the power supply before performing any engine repairs.This genuine OEM starter hub that is manufactured by Poulan. It is designed for use with select models of chainsaws. The hub is sold as an individual replacement part. There is no hardware included and other parts will require an additional purchase.

This starter pawl is a genuine Husqvarna part, sold individually. This starter pawl can be used as a replacement part in a leaf blower. The purpose of the starter pawl in a leaf blower is to function within the mechanism of the pull-start system so that the spring expands and contracts the starter pawl in order to release and coil back the starter rope that powers on the small engine of the leaf blower.If the starter pawl is dented, cracked, chipped, warped, or eroded to the point of reduced efficacy, the starter pawl should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This starter pawl is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

This is an OEM replacement starter pulley kit designed for use with gas chainsaws. The starter pulley assembly replaces the components of your recoil starter that may fail due to normal wear and tear. The pulley and return spring react to the pull of the starter rope and then engage the flywheel. This is what fires the chainsaw engine. If the starter rope is not reacting or the flywheel is not engaging, there may be an issue with the starter pulley assembly. This repair can be completed with a screwdriver and pliers and doesn’t take a lot of time. This starter pulley kit is a genuine product from Husqvarna, and it is designed for use with Poulan, Jonsered, and Husqvarna engines and outdoor power equipment. This kit includes the plastic pulley, return spring, hub, and two screws for securing the unit. The housing, rope, and starter grip will be sold separately if replacements are needed.

This starter cup assembly is a genuine Husqvarna part, sold individually. This starter cup assembly can be used as a replacement part in a string trimmer. The purpose of the starter cup assembly in a string trimmer is to rotate the flywheel with the purpose of powering on the small engine of the string trimmer; the starter cup assembly is a key component of the pull-start mechanism of a string trimmer.If the starter cup assembly suffers from puncturing, tearing, scraping, cracking, denting, eroding, or warping to the point of reduced efficacy, the starter cup assembly should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This starter cup assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This is a starter dog that is located right next to the retainer in many types of lawn and garden equipment. It is made of durable metal. This part is responsible for engaging the recoil starting system on the engine. Sometimes the starter dog can become damaged or worn, which will result in an engine that has trouble starting. In this situation, the starter dog will need to be replaced to ensure the lawn equipment works as expected.If the starter dog needs to be replaced, a pair of pliers will be needed for the process. Place the tool on a level surface and disconnect the spark plug wire. The blade assembly and clutch assembly will need to be removed to get access to the starter dog. Take this part out of the tool and replace it with a quality new component. Reassembly the other parts before use.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is made to be compatible with lawnmowers, snowblowers, tillers, edgers, and generators manufactured by Tecumseh, Briggs & Stratton, Toro, Cub Cadet, and Craftsman. The starter dog is sold as an individual part.