Craftsman Chainsaw Gasket & Seal

This is a complete set of gaskets designed as a set to make the most of chainsaw maintenance and repair. This OEM gasket kit contains seven unique gaskets that should be replaced whenever a chainsaw's motor is serviced or repaired. Gaskets are designed to ensure that fuel remains where it is intended within the engine and parts and does not leak or seep into other areas. The pressure is maintained in the machine through the use of effective gaskets and seals. This is a complete kit and comes with every gasket needed for chainsaws made by Craftsman, Husqvarna, Poulan, and McCulloch, among others. It does not come with any associated parts necessary for full chainsaw maintenance and will require disassembly of several systems to install the new gaskets.

This carburetor adapter seal is a genuine Husqvarna part, sold individually. This carburetor adapter seal can be used as a replacement part for chainsaws. The function of the carburetor adapter seal is to protect the carburetor from taking in external materials such as dirt, debris, and pebbles. The role of the carburetor is to take in air and fuel and mix them together at the proper ratio to ignite the spark plugs and turn on the engine. A carburetor adapter seal might have to be replaced if it can no longer effectively seal off the carburetor from external materials. Damage to the carburetor adapter seal can come in the form of punctures and erosion to the metal material, which can loosen the component and allow debris to enter and damage the internal machinery. If this is the case, this genuine OEM replacement part must be ordered before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This carburetor adapter seal is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This genuine OEM muffler gasket is sourced directly from the manufacturer for use in weed eaters and chainsaws to diminish the noise level. The muffler gasket seals the space where the engine and muffler connect to prevent air and noise from getting in or out. If the gasket is damaged or missing, hot air from the engine would escape and melt the housing cover. The noise level can be affected as well. During routine maintenance, the muffler housing should be removed to examine and replace the gasket. The cost is negligible so this gasket should be routinely replaced; don't wait for damage to the housing. A wrench or socket set and a screwdriver are needed for the replacement. The engine and muffler must be cool to touch before repairing. Remove the screws holding the housing cover and set the lid aside. Use the ratchet to remove the screws from the muffler. Remove and replace the gasket on the backside of the muffler. Reassemble the muffler unit using the ratchet to secure the screws. Reinstall the housing cover. The muffler gasket is sold as an individual unit. It is designed for use in weedeaters and chainsaws manufactured by Craftsman, Husqvarna, Poulan, and Poulan Pro.

This gasket kit is a genuine Husqvarna part, sold individually. This gasket kit can be used as a replacement part in a string trimmer. The gasket kit comes with all of the necessary components required to facilitate a complete replacement or a new installation of a gasket within a string trimmer. The purpose of a gasket in a string trimmer is to seal off a certain internal area of the appliance so that oil or internal materials cannot leak out of the area of the gasket and debris cannot pass into the area of the gasket.The gasket kit might need to be ordered to conduct a replacement of a gasket that has suffered damage over general wear and tear from long-term use of the string trimmer or as a result of an accidental collision with a hard object that rendered the gasket beyond functionality. If this occurs, the gasket kit should be ordered as a genuine OEM replacement part before using the string trimmer again.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This gasket kit is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This carburetor boot adapter is designed for use specifically on gas trimmers. It is compatible with products from Husqvarna, Poulan, and Craftsman. The carburetor boot adapter plays an integral role in connecting the carburetor to the carburetor adapter. The purpose of the carburetor boot adapter is to ensure the proper running of the carburetor and its adapter. The replacement or repair process of the carburetor boot adapter is incredibly straightforward.Since the carburetor boot adapter is made out of rubber, over time and with exposure to the elements, it will naturally dry out and crack. If this part is warped, cracked or damaged, it needs to be replaced immediately for the unit to operate properly.This carburetor boot adapter is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna.

This carburetor gasket kitt contains all of the needed components to rebuild the carburetor in manychainsaws. A carburetor mixes fuel and air before delivering it to the engine. The diaphragm helps to regulate the amount of fuel that is in this mixture. The gaskets help create a seal that keeps unnecessary air out so that the engine works properly.A carburetor gasket kit is needed to fix problems including worn-out gaskets or diaphragms, gas or air leaks, and sluggish performance problems. This allows users to repair rather than replace a carburetor. Signs that there are carburetor issues include engine roughness when it's at idle, engine vibrations, misfires, or if it hesitates under acceleration. Signs that the carburetor diaphragm has gone bad are when the engine won't start, if it cuts off while running, if there is excessive smoke during use, or if it revs up and down on its own.This part is a genuine Husqvarna part and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific carburetor gasket kit is compatible with chainsaws manufactured by Husqvarna, Poulan, Weed Eater, and Craftsman.

This is a gasket kit intended to replace three interior engine gaskets for several models of gasoline-powered Craftsman chainsaws. Chainsaws are particularly rugged power tools that see a great deal of pounding and dropping, as well as engine vibrations. All of these routine usage events result in wear and tear on the moving parts of the engine. Beyond sharpening the chain, keeping the air filter and carburetor working, sometimes it becomes necessary to replace internal engine parts, as well. Signs that the interior gaskets need to be replaced are a loss of power, an inability to get adequate RPMs from the engine to cut through wood, and continued leaking of oil from the engine manifold. The three gaskets in question, the cylinder gasket, intake gasket, and exhaust gasket, should all be replaced at the same. Whenever a sealed part of the engine is removed, the gasket that secures it to the rest of the engine should be replaced to assure air and oil tightness. Make certain when replacing these parts to use genuine OEM replacements like these. OEM parts are manufactured according to the specifications of the original parts and thus are a perfect match.