Craftsman Lawn Mower Parts

This genuine replacement part is a 9 x 2 inch MTD wheel complete assembly. This part is for use with walk-behind self-propelled lawn mowers. This complete wheel features link tread to provide better grip. This wheel assembly is the rear wheel, and attaches to the bottom of the mower to allow for good grip and smooth rolling, even on uneven ground. Over time, the wheels on a lawn mower can wear out or become damaged. This can reduce traction or affect the alignment of the mower. Replacing the wheel assembly is simple, but be sure to shut off the engine of the mower. Allow the engine to become cool before installing this part. Disconnect the spark plug to prevent the mower from accidentally starting. This OEM replacement part is made of high quality plastic, and is sourced directly from the manufacturer. This part is sold individually. This part is compatible with a variety of Craftsman, Cub Cadet, Yard Machines and MTD lawn mowers.Please note: original part numbers 734-1836, 734-1837, 734-1838, 734-1981, 734-1850 are now obsolete, and manufacturer has replaced the original part numbers with this part.

This genuine OEM replacement part is a flange bearing designed to be used with a wide range of lawn tractors. A bearing is a mechanical part made to restrict movement and prevent other parts from shifting about in the tractor. This is a flange bearing, referring to its particular shape. The bearing slides into place while the flange creates an added layer of protection around the connection. While restricting motion, bearings experience a lot of friction. After a long period, a bearing may eventually begin to wear away and other parts may start to feel loose or pull apart. This can cause more widespread damage in a lawn tractor, such as a broken suspension or disconnected lower deck. The difficulty of this repair will depend largely on where the flange bearing that needs replacing is located. The odds are that any repair will require a socket wrench set, a screwdriver, and a pair of pliers to access any flange bearing. This replacement flange bearing is sourced from its original manufacturer and will fit tractors made by Ryobi, MTD, Bolens, Troy-Bilt, Cub Cadet, Yard Man, and Yard Machines. This part does not include any additional hardware.

This lift cable is designed for use with many lawnmowers and snowblowers to ensure that the gears run smoothly while using the equipment. The lift cable is made of durable materials but has delicate connectors on each end which may eventually wear out. When the connectors or cables are damaged, the part will need to be replaced. This component is important since it helps control how fast the blades or other parts of the tool can operate. If the cable breaks, the tool may not start.If the lift cable has gone bad, is worn out, or is damaged, replacement is needed. There will be no need to use tools during the process, but work gloves can be helpful. The lift cable can be untwisted from the housing and removed from the tool. Take the new component and place it in the same location. Make sure to reassemble any additional parts before useThis is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The lift cable is made to fit lawnmowers and snowblowers manufactured by Craftsman, Toro, Cub Cadet, Troy-Bilt, MTD, Huskee, Montgomery Wards, and Yard-Man.

This OEM part is a 21 inch grass catcher frame that is used on walk-behind lawnmowers. The grass catcher frame holds and secures the fabric bag which catches the grass clippings from the lawnmower as it cuts them.The grass catcher frame may need to be replaced if it has broken or if it has become bent due to use over time. The operator may notice that the grass-catching bag is dragging on the ground or it is not staying in place; these are signs that the grass catcher frame needs to be replaced. This grass catcher frame part is a genuine Ryobi part sourced directly from the manufacturer and it is sold individually. It is used on both push and propelled walk-behind lawnmowers that are manufactured by Troy-Bilt, Ryobi, MTD, Bolens, Yard-Man, Yard Machines, Cub Cadet, and Husky. Please note that this is just the frame, it does not include the fabric bag.

This blade adapter has a 25mm inner diameter and fits onto the blade of a variety of lawnmowers. The blade adapter allows the blade to connect to the spindle for proper performance. This blade adapter is made of metal. Regular wear and tear can cause the blade adapter to go bad or even split in half. When this happens, the blade adapter will need to be replaced.Before replacing the blade adapter, the lawnmower should be turned off and the spark plug wire needs to be disconnected. Turn the mower upside down to get access to the component. Use a socket set to remove the old blade adapter and replace it with the new component. Replace any other components, connect the spark plug wire, and test the machine before use. This component is sold on an individual basis. It is an authentic OEM replacement part that is directly sourced from the manufacturer. The blade adapter is made to be used with lawnmowers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, MTD, Troy-Bilt, and Yard Machines.

This upper handle can be used as a replacement part for a lawnmower or snowblower. The upper handle allows the user to control the movement of the equipment while it is in operation.If the part suffers damage from direct impact or wears down from use over time, it may need to be replaced. An upper handle can suffer damage in the form of piercing, cracks, scrapes, punctures, and corrosion of the metal material. If this damage makes steering the lawnmower or snowblower difficult, the handle should be removed and replaced with this genuine OEM replacement part before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This upper handle is a genuine MTD part, sold individually. It is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Yard Machines, Huskee, Craftsman, Yard-Man, and Bolens.

This OEM idle mandrel pulley kit includes the pulley, spacer/washer, and a bushing. This idle mandrel pulley spins the blade on a lawnmower deck of a tractor mower.A new idle mandrel pulley kit will be needed if the bearing for this pulley is damaged, broken, or lost because the bearing is not available by itself. If the bearing inside of the pulley is not spinning freely as it should, then the entire idle mandrel pulley kit will be needed to repair this machine. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This genuine MTD part is sourced directly from the manufacturer and sold individually. The idle mandrel pulley kit is compatible with lawn tractors manufactured by MTD, Yard Machines, Bolens, Yard-Man, Troy-Bilt, Poulan, Cub Cadet, Husky, and Murray.