Craftsman Leaf Blower Parts

This replacement fuel cap is used with many types of gas-powered lawn and garden tools. The purpose of the fuel cap is to help keep dirt and debris out of the fuel tank. It also helps to reduce extra air from getting into the tank.Debris or air in the fuel tank can make it difficult to start a gas-powered machine. Dirt can cause damage to the engine, as well. The replacement fuel cap is a simple way to ensure these types of issues do not occur. Most fuel caps can last for many years without needing a replacement. However, over time, they could become damaged or worn out from too much use. The old cap can be removed and the new cap can be screwed onto the fuel tank to replace it. No tools are needed.The fuel cap can be used with trimmers and blowers from a range of manufacturers including Yard Machine, Cub Cadet, MTD, Craftsman, Murray, Remington, and Troy-Bilt. This is a genuine OEM part sourced from the manufacturer, and it is sold individually.

This is a fuel cap. It keeps fuel from leaking or spilling, and slows fuel evaporation when a machine is sitting for long periods. The fuel lid can be cracked or otherwise damaged, or it can become lost when removed for refilling. For the safety of the operator, a missing or broken fuel cap should be replaced immediately.Replacing a fuel cap is simple. If there is an existing cap, remove it first by turning it counterclockwise. Install the new fuel cap by matching up the unit's threads and twisting it clockwise until secure. Wear gloves when working with fuel caps.This fuel cap is a genuine OEM part. It is made of high-quality, durable materials. The cap is sold as an individual piece. The fuel cap can be used with MTD, Cub Cadet, and Troy-Bilt machines. It is compatible with blowers, cultivators, edgers, trimmers, and other lawn and garden equipment.

Few parts fulfill as many roles on lawn mowers and other landscaping power tools than the cover screw. This screw serves to attach metal housing parts, assemblies, and shrouds to one another on equipment such as power vacuums, snow blowers, edgers, tillers, hedge trimmers, lawn tractors, leaf blowers, grass trimmers and cultivators. As these are extremely durable metal screws, they seldom fail under ordinary use. It should be noted, however, that they are most often used at connection and pressure points. Stresses at these junctions sometime loosen screws, causing them to be lost or occasionally resulting in stripped threads. It's also occasionally the case that these screws are lost during repair or routine maintenance of yard equipment because of their small size. Users should make sure to consult their owner's manuals for replacement steps and any special instructions. Because of their small size and the ease of losing them during repair work or maintenance, it's recommended to keep a supply of appropriately sized screws on hand. Most importantly, when replacing a part make sure to use a genuine OEM replacement part. They are manufactured according to the specs of the original parts and are perfect replicas.

This part is a replacement speed control cable. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a defective, broken, or worn speed control cable in a variety of chipper and shredder models. The speed control cable allows the user to select the desired transmission speed. This part is subject to wear and tear and can snap or stretch over time. If this occurs, the equipment will not be able to be controlled properly and may be inoperable. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this speed control cable, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this speed control cable is suitable for use on several different models of chipper or shredders manufactured by MTD, Troy-Bilt, and Cub Cadet. This is a genuine part made of high-quality, durable materials and is sold individually.

This is a genuine replacement for the air cleaner thumb screw found on select engines used in lawn mowers. The thumb screw is a specialty part that is used to secure the air cleaner in a stable position. Over time, the screw can become damaged or worn because of the constant engine vibrations or exposure to high heat. This screw may also be lost during air filter replacements or other repair work. In either case, it should be replaced with a genuine part like this one to ensure the air cleaner remains secure and the machine can continue to be used. This genuine OEM thumb screw is manufactured by MTD and is compatible with several machines from the brand. It can also be used with models from Bolens, Yard Man, Yard Machines, HUSKEE, Cub Cadet, and Troy-Bilt. There are hundreds of compatible models that can use this thumb screw. The part is made of durable metal with a black plastic grip for easy installation with no tools required. This item is sold individually and does not include additional hardware or parts. Always allow the engine to cool completely and wear gloves when working on lawn and garden equipment.

A fuel cap assembly is a component often seen on lawnmowers and other lawn and garden equipment. It is made of durable black plastic and is used to ensure that fuel doesn’t spill out of the fuel tank. Over time, fuel cap assemblies can begin to wear out and cause problems. Sometimes this results in a cap that doesn’t tighten all the way or there may be a fuel smell when using a lawnmower or snowblower. If fuel is leaking, the cap doesn’t fit right, or the cap seems damaged, it’s best to replace it with a new component. This is a simple process that involves removing the original fuel cap assembly and fitting the new assembly to the lawn machine. This fuel cap assembly is a genuine OEM component that comes directly from the manufacturer. It is an individual part that is compatible with MTD, Murray, Cub Cadet, Bolens, Yard-Man, and Yard Machines lawnmowers, snowblowers, chipper shredders, and tillers. No tools are required to replace this component.

This air cleaner housing is a genuine MTD part, sold individually. This air cleaner housing can be used as a replacement part for lawn mowers and leaf blowers. The air cleaner housing provides a casing for the air cleaner so that it can shield the internal engine from dirt, debris, and pebbles. Check the air cleaner housing regularly to ensure that it is intact and no debris is getting into the engine. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This air cleaner housing is compatible with the following brands: MTD, Huskee, and Yard-Man.

The ignition coil is a standard part of internal combustion engines on lawn and garden equipment. This coil consists of the ignition plug, plastic housing, and metal wires that include a flexible plastic casing. The coil is responsible for connecting the spark plug and transmitting the current that creates the spark that allows the engine to fire. This coil may develop wiring problems or the rubber and plastic parts may become worn and damaged over time. This will require a full replacement of the assembly. It is a good idea to inspect the coil when changing the spark plug as a part of routine maintenance, as well. This genuine OEM ignition coil is compatible with lawn and garden equipment from Troy-Bilt, MTD, Yard Machines, Yard Man, HUSKEE, and Cub Cadet. It can be used on more than 150 lawn and garden machines, including lawn mowers, log splitters, and chipper/shredder models. This coil assembly includes the ignition plug, metal wires encased in plastic, and a plastic housing. The hardware required to install this part is sold separately, as are all other components. Be sure to wear gloves and allow the engine to cool before working on the ignition or other components.

This is an authentic OEM replacement part sourced directly from the manufacturer for use in various small engines. This oil fill tube assembly is part of the oil delivery system. This tube delivers the oil to the oil tank when it is added to the engine. If this tube cracks or deteriorates over time, the oil will not make it to the oil tank or the engine. This could lead to complete engine failure if the leak is not discovered. Oil on the driveway or lawn or smoke coming from under the engine when the lawnmower is running is a sure sign that the tube may need to be replaced.The oil fill tube assembly also houses the dipstick which is used to check the oil level in the mower. If the assembly is leaking, the reading won't be accurate and the lawnmower may be operated without adequate oil which can damage the engine. A screwdriver is needed to replace the oil fill tube. Do not replace this part until the engine has cooled. This oil fill tube assembly is made of black molded plastic and sold as an individual unit. It is designed for use in lawnmowers and other small engines manufactured by Toro, Tecumseh, and Briggs & Stratton.

Here is an OEM replacement fuel cap that can be used with a range of gas-powered lawn and garden machines. The fuel cap is used to protect the fuel tank from debris and dirt. It will also help to reduce air from getting into the fuel tank. If there is air or dirt in the fuel, it can make starting the vehicle more difficult or even impossible. Dirt in the fuel can also cause severe damage to the engine. A replacement cap is a simple fix to prevent these issues. Although fuel caps can last for years, there is always the chance that one could have been lost, damaged, or could suffer from too much wear and tear. The replacement cap can simply be screwed in place to replace the old cap. This is an authentic OEM replacement fuel cap that is sold individually. The cap can be used on many types of machines including tillers, log splitters, chippers, and other small engines. The fuel cap is compatible with many brands including Cub Cadet, MTD, Yard Machines, Yard-Man, and Troy-Bilt.

This is a recoil starter assembly for lawn and garden power equipment. When the recoil starter rope is pulled, this causes the spark which starts the engine.A new recoil starter assembly will be needed if the recoil or pulley system has broken. The rope may become broken or frayed and the plastic on the pulley could crack. If the rope becomes loose and there is no tension when it is pulled, then a new recoil starter assembly will be needed.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer and it is sold individually. It is used on engines, lawnmowers, lawn tractors, and log splitters that are manufactured by MTD, Yard-Man, Yard Machines, Cub Cadet, Husky, and Troy-Bilt.

This klik pin is used as a fastener on various lawn equipment such as tillers and lawnmowers. It is often used as a way to hold the wheel onto the assembly so the equipment can easily move over rough terrain. If the tool is having trouble with terrain and movement, it could be related to the klik pin. It may have become bent, damaged, or broken. If those things occur, or the klik pin is missing, it will need to be replaced.Getting access to the klik pin is fairly easy. It will be securing the wheel to the axle and will need to be pulled off. A quick look at the pin will give an idea of whether it is damaged or broken. If it is, the solution is to replace the part with a new klik pin. This klik pin is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The pin is made to be used in lawnmowers, edgers, snowblowers, and tillers created by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.