Craftsman Log Splitter Parts

This governor arm shaft can be used as a replacement part for hedge trimmers, string trimmers, lawnmowers, or chipper shredders. The governor arm shaft for one of these small engine appliances is a connecting part within the governor system; it is fastened to the governor cross shaft and is attached to the throttle linkage and the governor spring. Governor arm shafts can be subject to damage in the form of erosion, piercing, puncturing, or general wear and tear. Damage to a governor arm shaft can affect all of the surrounding components. As such, if a governor arm shaft suffers damage such that it cannot fasten components together, it must be removed and replaced immediately before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This governor arm shaft is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This part is a crankcase cover. The crankcase itself is what shields the crankshaft from any dirt or debris that would damage the engine. The crankcase is a pressurization chamber for the fuel-air mixture. This part is a cover for the crankcase. It's important that this shield is intact because any dirt or debris that gets into the engine can cause the engine to fail.A new crankcase cover may be needed if the crankcase cover is dented, broken, or damaged in any way. A visual inspection is sufficient. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This crankcase cover is compatible with engines, lawnmowers, tillers, log splitters, chippers, shredders, and trimmers manufactured by MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt.

This is a metal tappet that is used with many types of lawn equipment with small motors. The tappet is a component that attaches to the push rod. Tappets take the rotating motion provided by the camshaft and transfer it into linear motion so the valves operate properly. Over time, the tappet can break or become damaged and will require replacement.When replacing a tappet, users will need a set of pliers. It's best to wear work gloves during the process and make sure the spark plug wire is disconnected. Items like the mufflers, crankcase breather, and other parts will need to be removed to access the tappet. A visual inspection of the tappets can be done by removing them from the engine to check for damage. Remove the old tappet and replace it with a new part.This tappet is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The tappet is made for use with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, Yard-Man, and MTD.

This is a piston that is designed for use with several types of lawn and garden equipment. The main purpose of the piston is to seal off the pressurized combustion chamber from the crankcase. It takes the combustion power and transfers it to all of the working parts of the equipment. If the piston is going bad or has been damaged, the tool may have poor performance, the exhaust may create white smoke, or the equipment may burn oil excessively.A compression test can determine whether the pisons are malfunctioning. This involves taking a spark plug out of the engine and then starting the tool with a compression gauge attached to the cylinder where the spark plug used to be. If there is a problem with the compression, the piston will need to be replaced.This piston is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The piston is designed to be compatible with lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, and MTD.

This is a piston pin that is used in many types of small engine lawn and garden equipment. The piston pin is a component that connects the connecting rod to the piston. It acts as a bearer that allows the connecting rod to pivot whenever the piston is moving. The pin is a hollow rod made of durable materials but constant wear and tear can damage the part or cause it to break.If the piston pin is broken or damaged, it will need to be replaced. A pair of pliers and an Allen wrench may be needed to complete the replacement. The process involves removing the access covers and the housing from the piston crank. The old piston ring can be removed from the connecting rod so the new component can be installed. After installation, reassemble the equipment.This piston pin is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The pin is designed to be compatible with wood chippers, log splitters, edgers, string trimmers, tillers, and lawnmowers manufactured by MTD, Craftsman, Yard Machines, and Cub Cadet.

This is a carbon canister assembly that is used to make lawn and garden equipment more ecologically friendly. When the engine is turned off, the fuel vapors from the fuel tank and carburetor are asborbed by the charcoal in the carbon canister assembly. It's part of an evaporative emission control system that captures hydrocarbon emissions.If there is a bad odor coming from the fuel, high emission levels, or pinging sounds, this could be an indication that the carbon canister assembly is failing. It can also cause weak performance from the equipment. If the carbon canister assembly isn't working properly, it will need to be replaced. Only basic tools are needed to remove the old carbon canister. The replacement component can be snapped in its place to ensure the equipment is capturing harmful emissions.This carbon canister assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. This part is designed for compatibility with lawnmowers, trimmers, wood chippers, log splitters, string trimmers, and tillers made by MTD, Cub Cadet, and Craftsman.

This cylinder head is made for use in many types of lawn and garden equipment. The cylinder head is located on top of the engine in the machinery. It is tasked with making sure the combustion chamber is sealed shut. The gap between the engine and the cylinder head will be filled using a head gasket. Another responsibility of the cylinder head is ensuring the cylinder is constantly lubricated. If the cylinder head isn't working, it may cause low oil levels, lowered engine performance, and exhaust smoke.To inspect the cylinder head, the grass shield and screen should first be removed. Remove the engine cover by taking out all of the bolts that secure it. Remove the engine shroud and the bolts that connect the head to the pump bracket. The cylinder head will be located under the valve cover. Remove it and install the replacement part before using the tool.This cylinder head is an authentic OEM replacement part sourced directly from the manufacturer. It is sold individually. The cylinder head is created to be compatible with lawnmowers, string trimmers, edgers, log splitters, and wood chippers manufactured by MTD, Cub Cadet, and Craftsman.

This is an authentic replacement bowl drain washer for use with lawn mower engines and other types of lawn and garden equipment. The washer is used to help seal the connection between the float bowl and the bowl drain screw in the engine. Although the washer is made from metal, it may still need to be replaced at some point if it becomes corroded, bent, or otherwise damaged. This would mean that it no longer provides a proper seal and that there could be leaks. Owners should periodically take the time to inspect the bowl drain washer, along with other elements of their machine, and replace them as needed. It may be a good idea to have several of the washers on hand. The genuine OEM replacement bowl drain washer is sold individually. It will work with a range of different types of machines including lawn mowers, snowblowers, pressure washers, and other small engines. Compatible brands include Craftsman, Toro, Tecumseh, Lawn-Boy, MTD, and Briggs & Stratton. Buyers should always be sure they are choosing the correct washers for their needs.

A primer bulb works to lubricate the engine with oil by pressing in the rounded tip of the primer bulb. It measures an inch in diameter and an inch tall. Over time these parts can wear out from sun exposure, contact with chemicals, or dry rot. The gasket may wear out before the primer bulb, so it is important to check this part regularly to discover any damage. Installing the new primer bulb kit should be easy and only take a few minutes. Only a screwdriver set and pliers are needed to complete this repair. This primer bulb kit works in conjunction with small engines, lawnmowers, log splitters, and pressure washers made by brands Briggs & Stratton, Craftsman, Cub Cadet, Lawn-Boy, MTD, Tecumseh, and Toro. It is a genuine OEM part and is sold individually.

Spark plug covers can help to ensure added protection for the sparkplugs and can make sure that there is no debris getting on them. While the spark plug covers are long-lasting, they will eventually need to be replaced. Over time, they will start to dry, crack, and come apart. When this happens, replace the covers right away. Also replace the spark plugs at the same time. The OEM spark plug cover is sold individually, be sure to get enough to cover all the plugs. The cover can work with many different brands, including Craftsman, Briggs & Stratton, Toro, Cub Cadet, Troy-Bilt, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity. The covers can work for many types of machines, including lawnmowers, generators, chippers, log splitters, edgers, pressure washers, tillers, and other small engines.

This is a flywheel key manufactured by Craftsman and also used by Tecumseh for many of their small gasoline powered engines, particularly lawn mowers. A flywheel key is a part that sits between the flywheel and the crankshaft of the engine. When the engine turns over, the flywheel causes the equipment's moving parts to turn, such as the blades of a mower. A flywheel key is designed to sheer off or break without damaging the flywheel should the mower blades hit an obstacle. If the engine will not start, starts but does not have full power, or throws out a lot of engine oil and smoke, the chances are the flywheel key is damaged. If there is a tremendous amount of backlash when the user tries to pull the starting rope, that also is a sign of a damaged flywheel key. When a flywheel key is damaged, it causes the spark plug to fire out of synch with the proper fuel/air mixture coming into the cylinder. Remember when replacing the flywheel key, it is essential to use a replacement part like this one that is a genuine OEM manufacture part. It is identical the original.

The primary function of a carburetor is to mix fuel and air in the right ratio. Fuel enters the carburetor through the fuel inlet fitting and then to the float bowl which delivers fuel to the other circuits. From there, the fuel goes to the needle valve, which is actuated by the float. When there is insufficient fuel, the float will stay down, keeping the valve open. Once the chamber has enough fuel, the float will go up and close the valve. A failed float bowl may leak or have too many dirt particles deposits that impede fuel flow. Luckily, you can easily replace a busted float bowl. This part is a genuine OEM Tecumseh 631867 float bowl replacement. You’ll have the assurance that this replacement is manufactured according to Tecumseh’s highest standards. It is compatible with mowers, tractors, and snowblowers from Toro, Cub Cadet, Lawn-Boy, MTD, and Tecumseh. This part is sold individually.

This is a replacement carburetor for use with various types of small engines. The role of the carburetor in the engine should never be overlooked. This part is responsible for providing the correct air and fuel mixture to the engine, so it can start and continue to run properly. In time, there may be issues with the carburetor. Parts of the carb could fail or become corroded and need to be replaced. To get a better idea of whether the carburetor is the problem, owners can remove the oil filter and add a teaspoon of fuel directly to it. Then, they will start the engine. If the engine starts, but stalls after a few seconds, it could be the carburetor. It should be replaced soon to ensure the engine continues to start and perform well. This is a genuine OEM replacement carburetor that is sold individually. It does come with the needed gaskets. The carburetor can be used on various models of log splitter, mowers, and other small engines. Compatible brands include Tecumseh, Craftsman, and MTD.

This replacement stud is designed for use in select lawn mowers. The carburetor mounting stud is specialty hardware that is used to mount the carburetor on the engine assembly. The stud bolt secures the carburetor, but it is subject to extreme temperatures and ongoing vibrations so it can become worn or even snap over time. Without a stud bolt, the carburetor will not be properly affixed to the rest of the engine, which means it will not be able to run properly. Replacing a faulty stud bolt should be done as soon as possible. This OEM stud bolt is manufactured to exact standards and is compatible with 150+ models from the Tecumseh brand, as well as select mowers from Toro and MTD. The bolt requires pliers and a socket set to replace. Always allow the engine to cool completely and drain the fuel system before performing work on the carburetor or internal engine parts. This stud bolt is made of durable metal and sold as a single unit.