Craftsman Log Splitter Parts

This oil fill plug is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by MTD. An oil fill plug keeps the oil where it is supposed to be in the machine. It is designed for use with snowblowers, tillers, leaf blowers, wood chippers, and log splitters. It is compatible with products from brands such as Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, and MTD.The oil fill plug is crucial in preventing oil from leaking as well as clearing the path upon removal for any needed oil changes. It is removed when the oil needs to be drained. The replacement or repair process of the oil fill plug should be straightforward, though it may be helpful if the owner or operator uses a socket wrench to aid in the replacement process. The user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This O-ring is an OEM part sourced directly from the manufacturer, and it is sold individually. The manufacturer of this product is MTD. This O-ring is designed for use with different types of outdoor lawn and garden equipment, including snowblowers and log splitters. It is compatible with products made by the following brands: MTD, Cub Cadet, and Craftsman.The design and purpose of the O-ring is relatively self-explanatory. It is an “O” shaped ring of material which is used as a gasket. It is designed to sit within a groove and be compressed during assembly. The reason for this is to create a perfect seal that blocks the path of liquids or gases from escaping or flowing into regions of the machine where they are not supposed to be.To replace an O-ring, check the air filter cover, remove the carburetor, and clean it thoroughly. Next, replace the O-rings, carburetor gasket, and air filter, followed by the spark plug. Regular maintenance of the carburetor and routine evaluation of the suitability of the O-ring is essential to proper mechanical maintenance.

This plastic body fuel shutoff lever is a genuine OEM replacement part for many different engines on lawn and garden equipment. It is part of the fuel shutoff valve assembly. This valve controls the gas flow from the fuel tank to the engine. The shutoff lever is used to open or close the valve. This lever is a plastic part that may break or crack over time. Exposure to rain and snow and excessive use may lead to damage. When this happens, the shutoff lever should be replaced to prevent fuel from leaking from the fuel tank.Repairs to the fuel tank should be made outside where there is adequate ventilation. Remove all fuel from the fuel tank and take the spark plug out before working on the shut off lever. Remove the fuel tank from the machine and turn it upside down to get to the fuel shutoff lever. Remove the lever from the shutoff valve. Install the new shut off lever. Reinstall the fuel tank and fill it with fuel.This fuel shutoff lever is sold individually. It is made for MTD and Troy-Bilt log splitters and other small engines.

Governor arm shaft for small engines on lawn and garden equipment. Connects governor assembly to carburetor. Replace if worn, damaged, or broken.

This is a genuine OEM primer hose replacement part sourced directly from the manufacturer. It is used on tillers and other outdoor power equipment with a primer bulb assembly. The hose is the part of the assembly that runs from the fuel tank to the carburetor. When the primer bulb is pressed, fuel is collected from the tank and pushed into the carburetor to start the engine. Any unused fuel is released back into the fuel tank. If the primer hose has cracks or holes in it, the vacuum inside the hose will be lost and the primer bulb will not force the fuel to the carburetor. These cracks or holes can occur over time due to fuel eroding the hose material. If the primer bulb is not working and fuel cannot be seen in the tube, the primer hose should be inspected and replaced if necessary.Before replacing a primer hose, empty the fuel from the fuel tank and fuel lines into a clean container. Remove the spark plug. Remove and replace the primer hose. After refueling, check the primer bulb to ensure the primer hose is pulling fuel. This primer hose is clear plastic material; it is sold as an individual unit. This hose is compatible with tillers, chippers, shredders, and other small engines manufactured by Cub Cadet, MTD, and Yard Machines.

This muffler guard is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. A muffler guard is an important part designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a tiller and a log splitter. It is compatible with products by brands such as MTD, Cub Cadet, Yard Machines, and Troy-Bilt.The muffler guard part is crucial to the proper operation of equipment with small engines. The primary purpose of the muffler guard is to quiet or muffle the volume of the noise coming from the exhaust of the engine and to guard the muffler. The replacement or repair process of the muffler guard should be straightforward, but always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

Engines, even small engines, get quite hot. Muffler shields like this one are used on small engines, like those found in log splitters, to help protect from this heat. Without a muffler shield, the engine could cause burning, which can be dangerous. If there is an issue with the heat shield, owners will want to replace it as soon as possible.Although muffler heat shields are made from metal and are meant to be durable, they could still need to be replaced eventually. They could crack or bend, or they could become corroded over time. Regardless, if there is a problem with the muffler shield, it should be replaced. Wait until the machine is cool before making any repairs.This muffler shield works with many models of small engines from manufacturers MTD, Craftsman, Columbia, Yard Machines, Cub Cadet, and Troy-Bilt. The shield is sold individually and is a genuine OEM part sourced from the manufacturer.

Pistons are essential for proper engine function. When expanding gases push the piston, it turns the crankshaft. When the piston compressed the fuel-air mixture, the spark ignites and causes combustion. If the pistons are going bad, owners might notice white or gray exhaust smoke, low power when accelerating, loss of performance, or excessive oil consumption.Pistons may need to be replaced for any number of reasons. They could have damage to their crown, which could be caused by overheating. There could be impaction marks if they were not installed correctly or if the valve timing is incorrect. The pistons could be fused or have elements that have melted, or there could be cracks in the piston. Any of these issues would necessitate a replacement.This piston is used for select small engines from MTD, Troy-Bilt, Yard Machines, Columbia, and Cub Cadet. Each piston is sold individually and is a genuine OEM part sourced from the manufacturer. Those who need to replace more than one piston will need to buy them separately.

The flywheel is an engine component that attaches to a rotating shaft which helps to provide smooth power delivery from the motor to the machine. Some of the signs of a bad flywheel include strange noises when the motor starts, grabbing when the clutch engages, vibrations, and a burning smell.The flywheel is made from durable metal, but it could still need to be replaced in time. It could be damaged from debris, or it could simply be worn out from use over the years. If there is an issue with the flywheel, it should be replaced it before it causes more problems with their engines and the capabilities of their machines.This flywheel is for use with certain engine models from MTD, Troy-Bilt, Yard Machines, Craftsman, Columbia, and Cub Cadet. Each of the flywheels is made from quality materials and is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.

This breather cover plate replaces worn-out, damaged, or misplaced cover plates to ensure the outdoor power equipment runs as smoothly as possible.Breathers are essential for internal combustion engines, as they let gases escape from the combustion chamber. If gases cannot properly vent, pressure within the engine will build which can lead to ruptured seals. Eventually, this can cause oil to spill into the combustion chamber and is very problematic for the engine. Without a breather cover plate, the breather cannot function properly. This part should be replaced whenever it is worn out or shows signs of deterioration. This breather cover plate is a genuine MTD replacement part and has been sourced directly from the manufacturer. This replacement breather cover plate fits various different models of MTD, Cub Cadet, Yardman, and Troy-Bilt outdoor power equipment such as lawn mowers, log splitters, and trimmers. Please note this cover plate is sold individually.

This breather gasket easily replaces old, worn-out gaskets to ensure the utmost efficiency of relevant outdoor power equipment.A worn out or deteriorated breather gasket can cause a number of issues such as high-idling and oil leaks. As breather gaskets age, they will need to be replaced. Breathers need to function properly, as they are critical for relieving engine pressure and reducing buildup of harmful materials within the engine. This breather gasket is a genuine OEM replacement part and has been sourced directly from the manufacturer. This replacement breather gasket fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers and trimmers. Please note this breather gasket is sold individually.

This component bracket can be used as a replacement part for lawnmowers, lawn trimmers, chipper shredders, edgers, tillers, leaf blowers, snowblowers, or log splitters. The component bracket for one of these small engine appliances is responsible for attaching other components to one another, clamping those components in place, and orienting those components in the proper direction such that the engine can operate smoothly.When damaged, component brackets can loosen or disorient the components they are attaching together. This damage can come in the form of cracks, tears, punctures, piercings, or erosion of the metal material. If the component bracket suffers enough damage that it can no longer hold parts in place, it should be removed and replaced with this genuine OEM replacement part before the small engine appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This component bracket is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.