Craftsman Snow Removal Equipment Hose, Tube & Fitting

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This grease fitting attaches to the cast pivot bar on many types of garden and lawn equipment. It is made of durable metal and ensures that internal parts of the equipment are lubricated so they operate at their full potential. Sometimes a grease fitting can become worn damaged and need to be replaced.If a lawn tool no longer seems to be properly lubricated, the grease fitting could be the cause. A pair of pliers will be required to make the replacement. Clean the area near the grease fitting and then use a hex wrench to remove it from the machine. Take the new fitting and place it into the hole and tighten it before applying grease.This is a genuine OEM replacement grease fitting that is sourced directly from the manufacturer. The part is sold individually. The fitting is compatible with chipper shredders, lawn tractors, snowblowers, string trimmers, edgers, chainsaws, and lawnmowers manufactured by Yard-Man, Cub Cadet, Troy-Bilt, Craftsman, Ryobi, Murray, Broan, Yard Machines, Huskee, Montgomery Wards, Bolens, MasterCut, and MTD.

The fuel line is used to carry fuel through the machine, and it must be in good condition. As fuel line parts age, they are prone to damage. In some cases, they might crack, which could result in a fuel leak. Other times, the ends of the tube might not fit properly, even when they are clamped down. Eventually, the fuel line will need to be replaced. This is a relatively simple job, which will require only a pair of pliers to complete. This replacement fuel line kit is sold individually. This OEM kit will include the rubber tube as well as two metal clamps for attaching the line to the machine. The fuel line may be used with snowblowers, lawnmowers, tillers, leaf blowers, log splitters, wood chippers, and other small engines, It will work with machines from many different brands, including MTD, Yard Machines, Troy-Bilt, Yard-Man, Bolens, Cub Cadet, and Husky.

This fuel line hose is an authentic OEM replacement part for various lawn mowers, tractors, and snow blowers. The fuel line is responsible for carrying fuel from the fuel tank to the carburetor. It is made of a thick vinyl rubber material and clamps onto the exterior of the lawn appliance. Although they are usually made of durable rubber, fuel lines can tear if they are caught on something while the appliance is in use. If the fuel line rips, fuel will leak from the fuel tank and carburetor onto the appliance and the operator. This has the potential to start a fire and should be fixed as soon as possible. It is recommended that all fuel be drained from the appliance before making this repair. Using a pair of needle-nosed pliers, detach the damaged fuel line from the appliance and pull it out from the carburetor and through the fuel tank. Reassemble with the new hose using the pliers. This part is a high-quality replacement hose sourced from its original manufacturer and is compatible with Cub Cadet, Huskee, Yard Man, MTD, Troy-Bilt, and Yard Machines appliances. This part does not ship mounting clamps or any additional hardware.

The breather hose is designed as a valve or vent that only functions one way. It allows air into the fuel tank but ensures that no air or emissions escape the tank. When this hose is not functioning, emissions and air could be leaking from the tank and cause the engine to perform poorly or not perform at all. The hose could become cracked or damaged, or the ends could lose their seal. Either way, a replacement hose will solve the problem and get the equipment back in order. This genuine OEM replacement breather hose is made by MTD and manufactured to exact specifications. It is compatible with several engines on lawn mowers, snowblowers, and chippers from brands like Troy-Bilt, MTD, Yard-Man, Yard Machines, Bolens, Cub Cadet, and Husky. There are more than 150 compatible machines for this breather hose. This high-quality composite rubber hose is sold individually.

A fuel inlet is a connector that allows gasoline from the fuel line of an engine to pass through it into the carburetor. Once in the carburetor, the fuel mixes with air and passes into the cylinder, where it ignites to create power for the engine. Thus, the fuel inlet is attached on the one side the carburetor and to the fuel pipe, or line, on the other. This inlet is used in power tools such as lawn mowers, snowblowers, edgers, pressure washers, chippers, and generators. Periodically, since it is made partially of plastic, the fuel inlet will weather and crack so that it is no longer fuel tight. The main sign to watch out for with fuel inlets is gasoline leakage. This is always a dangerous situation. The user may have to remove the carburetor housing cover to determine whether the leak comes from the fuel line or the inlet valve. It is a good idea to replace each of these pieces at the same time. When choosing a replacement part for the fuel inlet, always use a genuine OEM replacement part like this one. This inlet is compatible with power tools made by Tecumseh, Briggs & Stratton, Toro, MTD, Lawn-Boy, and Cub Cadet.

This is a fuel fitting that is part of the fuel assembly on many models of snowblowers and lawnmowers with engines. It's made of durable metal and plastic. The part is used to move fuel from the fuel tank into the engine carburetor. The fuel fitting is responsible for drawing the pressure needed to pump fuel so the lawn and garden equipment can operate. The fuel fitting can be damaged through use or impact and will no longer work as expected. If this occurs, the fuel fitting will need to be replaced.Depending on the equipment that contains the fuel fitting, tools for a replacement might include a pair of pliers, a screwdriver, and a hex key. If a visual inspection shows that the fuel fitting is cracked, turn off the equipment and disconnect the spark plug wire. Remove the fuel fitting from the carburetor and the fuel tank and replace it with a new part.This fuel fitting is designed to be used with lawn mowers and snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet. It is sold as an individual part. This is a genuine OEM replacement part that is directly sourced from the manufacturer.

This is a genuine fuel line replacement that can be used with select small engines found in outdoor lawn and garden equipment. The fuel line is responsible for delivering or returning fuel to or from the engine while it is in operation. The engine typically has a fuel return line and an intake line, and both can become corroded, worn, or cracked over time with constant exposure to chemicals and high temperatures. If the fuel lines are damaged, they can leak or fail to work at all, making the engine inoperable. When doing repairs, both lines should be replaced at the same time for consistency. This genuine fuel line provides an exact fit for compatible models. This genuine OEM fuel line is manufactured by Craftsman and designed for use in engines on their lawn and garden equipment, as well as certain models from MTD. It can be used on 4-cycle engines found in lawn tractors and chipper/shredder units that are compatible. This fuel line is made of durable rubber and sold as a single unit. Those who need two lines will have to purchase additional quantities. Always drain the fuel and disconnect the spark plug before working on the fuel tank assembly or fuel lines of any engine.

This breather tube is part of the crankcase ventilation system in a piece of lawn and garden equipment. It includes a one-way valve that helps prevent any exhaust gases from moving back into the engine. It has a reed that lubricates the piston while the tube moves collected oil to the crankcase. The breather tube has fibers that cool and filter the air to prevent the engine from overheating to create the best performance.If the lawn equipment is leaking oil, this can be a sign that the breather tube is broken or needs to be cleaned. In the case where it is dirty, it often creates bluish smoke that comes from the exhaust pipe. When dark smoke comes from the equipment, this is a sign that the breather tube is malfunctioning. A visual inspection will give an indication of whether the tube is dirty or broken so it can be replaced if required.This breather tube is an OEM replacement part that is sourced directly from the manufacturer. It comes as a single tube and is designed for use in snowblowers, lawnmowers, wood chippers, pressure washers, and generators made by Briggs & Stratton, MTD, Tecumseh, and Toro.