Craftsman Snow Removal Equipment Carburetor

This carburetor is a genuine MTD part. A carburetor is a tube that filters the air and fuel through the valves of the engine. This carburetor works with small engine devices such as snowblowers and lawn mowers. Natural wear and tear from the usage of an engine over a long period of time can cause the individual components within the engine to malfunction or fall into disrepair. The longer that a carburetor is in use without replacement, the more likely it is to become damaged or weakened, which will require a swift replacement. Signs of weakening infrastructure for which the carburetor might be responsible can include an engine that frequently stalls or will not start, a clotted fuel bowl blocked by dirt and gunk that results in overflowing fuel through the engine's vents, a poor ratio of air and fuel that results in wheezing, hissing, or popping engine noises, or a poor ratio of air and fuel that results in black smoke pouring out of the engine. Any of these symptoms in an engine will require the immediate replacement of the carburetor.

A gas powered engine often requires priming before it can run, which means injecting some of the fuel into the engine's carburetor. Here, a careful balance of air and gas will receive a spark that causes combustion. The most common way to prime an engine is to use a primer assembly that is activated by a bulb that is pressed to create suction and draw fuel into a reservoir or carburetor. This replacement fuel bulb is for snowblowers that rely on gas powered engines to run. The fuel bulb is very flexible and made to endure seasonal conditions. It works with Craftsman, Yard Machines, MTD, Troy Bilt, and Bolens snowblowers. This is an OEM replacement part that fits into the cover assembly and which requires only a wrench to replace and install. It is sold individually, and other components of the priming assembly may be needed.

The primer bulb is a small plastic piece that will draw fuel from the fuel reservoir and into the carburetor when it is pressed down. This ensures that the fuel can get into the carburetor so that combustion can happen in the engine. If the primer bulb is broken or damaged on the engine, it will mean that the carburetor will not be getting the fuel it needs to get the engine to start. In some cases, the engine might not start at all. Other times, it might take a while to get the engine to start. These could indicate that it is time to replace the bulb. This is an OEM replacement part that is sold individually. It will work with lawnmowers and other types of small engines. The bulb is compatible with a range of different popular brands including Toro, Kawasaki, Cub Cadet, MTD, and Craftsman.

This is a genuine replacement carburetor rebuild kit designed for use with select snowblower engines. The carburetor is responsible for mixing the air and fuel that flows into the engine to initiate combustion and start the engine. It has many moving parts and gaskets, and is exposed to high heat and vibrations during use, which can lead to damage and wear over time. A damaged carburetor can cause the engine to die or fail to start. If the carburetor fails, it is often cheaper to rebuild it than to replace the unit or the entire machine. When replacing the components of the carburetor, each part should be done one at a time and the areas around the parts should be cleaned before installing new pieces. Be sure to work in a well ventilated area and allow the engine to cool completely before performing any repairs.This OEM carburetor rebuild kit is manufactured by MTD and designed for use in certain snowblowers from the brand. The kit is also compatible with select engines from Yard Machines, Yard Man, and Troy-Bilt. It includes all of the gaskets, pins, and other components that are needed to do a major carburetor overhaul. It is sold as an individual set.

This carburetor is a genuine OEM part. It is compatible with MTD brands, with models including 270-SUA, 370-SUC, and 170-SU. It can be used on appliances with small engines such as lawn mowers, snowblowers, and wood-chippers. The function of a carburetor is to combine the air and the fuel before the two are filtered into the engine through its connecting valves.If an engine or an appliance altogether is malfunctioning, it could be a sign that the carburetor needs to be replaced. First, check to see if the tank of fuel is in fact full. Then, in order to isolate and test the efficacy of the carburetor, tip a spoonful of fuel directly into the carburetor and try to start the engine with the starter rewind. If the engine sputters but eventually stops, it is likely that the carburetor is damaged or needs repair. This can be solved by ordering an OEM replacement carburetor part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.When searching for a replacement carburetor, it is important to corroborate and confirm that the appliance and engine are of the MTD brand.

This carburetor repair kit is made to be used with several types of lawn and garden equipment with small engines. It has all the replacement parts needed to get a generator or snowblower running again if there is a problem with the carburetor. The carburetor is a component inside the lawn equipment that controls the mixture of air and fuel that ignites within a cylinder to cause the engine to run.If the lawn and garden equipment refuses to start up even with a full tank of fuel, this is one of the primary signs that the carburetor has gone bad and will need repairs or replacement. Remove the air filter and pour a small amount of fuel into the carburetor to test where the component is working the way it should be. If the engine turns on but then dies after a short period of time, there is likely an issue with the carburetor. It will need to be rebuilt or replaced.This is a genuine OEM replacement carburetor repair kit directly sourced from the manufacturer. It is compatible with snowblowers and generators manufactured by Craftsman, Tecumseh, Cub Cadet, Toro, and Husqvarna. Each repair kit is sold individually and may require basic tools for installation.

This is a throttle link made to be used by many types of lawn and garden equipment. It is a metal part that connects the carburetor to the throttle controls. If the throttle link is damaged or broken, it will not be possible to change the speed of the tool's engine. In some cases, if the throttle link is malfunctioning or broken, the equipment may not run at all.The throttle link is made of durable materials but it can be weakened by continued use due to stress and vibrations. This can cause the link to break down and stop working. If this occurs, it will need to be replaced. A screwdriver or an Allen wrench will be required to handle the replacement process. The throttle link will need to be removed from the throttle body so the replacement part can be installed.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The throttle link is created for use with snowblowers, lawnmowers, tillers, pressure washers, and generators made by Briggs & Stratton, Tecumseh, Cub Cadet, Craftsman, MTD, Simplicity, and Toro.

The carburetor repair kit provides buyers with several replacement parts that can be used to repair carburetors on various types of lawn and garden equipment. The carburetor is the location where the fuel and air mix for the internal combustion of the engine, and it needs to be in good working order. However, the carburetor may have issues that will need to be repaired, such as corroded springs or lost welch plugs. Whether through natural wear and tear, outside damage, or being lost, it is important for owners to ensure their carburetor is repaired as soon as possible. A bad carburetor can make it difficult to start the engine, cause misfires, and reduce power. This repair kit provides genuine OEM parts for carburetors. The kit includes commonly replaced parts including needles, welch plugs, screws, O-rings, and springs. The parts are used for carburetors on equipment such as snowblowers, generators, lawn mowers, and other small engines. They are compatible with Toro, Tecumseh, Briggs & Stratton, and Craftsman machines. Buyers should always consult their manual to be sure they are choosing the correct replacement parts for their make and model.